From 492cbeafacef5a73c402b03da72951a09a379119 Mon Sep 17 00:00:00 2001 From: Ida Delphine Date: Sat, 20 Mar 2021 19:54:57 +0100 Subject: bsp-build: Update manual bsp build command --- user/start/bsp-build.rst | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'user/start/bsp-build.rst') diff --git a/user/start/bsp-build.rst b/user/start/bsp-build.rst index 137b3ab..335962b 100644 --- a/user/start/bsp-build.rst +++ b/user/start/bsp-build.rst @@ -11,7 +11,7 @@ Build a Board Support Package (BSP) You installed the tool suite in your installation prefix, made ready the source for two RTEMS source packages and if you are using a Git clone bootstrapped the RTEMS sources in the previous sections. We installed the tool suite in -:file:`$HOME/quick-start/rtems/5` and unpacked the source in +:file:`$HOME/quick-start/rtems/6` and unpacked the source in :file:`$HOME/quick-start/src`. You are now able to build :ref:`Board Support Packages (BSPs) ` for all @@ -112,13 +112,13 @@ directory to your ``$PATH`` throughout the remaining steps. Run the command: .. code-block:: none - export PATH=$HOME/quick-start/rtems/5/bin:"$PATH" + export PATH=$HOME/quick-start/rtems/6/bin:"$PATH" Check your installed tools can be found by running: .. code-block:: none - command -v sparc-rtems5-gcc && echo "found" || echo "not found" + command -v sparc-rtems6-gcc && echo "found" || echo "not found" The output should be: @@ -128,7 +128,7 @@ The output should be: If ``not found`` is printed the tools are not correctly installed or the path has not been correctly set. Check the contents of the path -:file:`$HOME/quick-start/rtems/5/bin` manually and if :file:`sparc-rtems5-gcc` +:file:`$HOME/quick-start/rtems/6/bin` manually and if :file:`sparc-rtems6-gcc` is present the path is wrong. If the file cannot be found return to :ref:`QuickStartTools` and install the tools again. @@ -145,7 +145,7 @@ everything else. For detailed information about the BSP build system, see cd $HOME/quick-start/src/rtems echo "[sparc/erc32]" > config.ini echo "BUILD_TESTS = True" >> config.ini - ./waf configure --prefix=$HOME/quick-start/rtems/5 + ./waf configure --prefix=$HOME/quick-start/rtems/6 The first invocation of ``./waf`` needs a bit of time (e.g. 10 seconds) since an internal cache file is populated. This command should output something like -- cgit v1.2.3