From 5a206711c013afddb0ca8d03adb96e506a6a8900 Mon Sep 17 00:00:00 2001 From: Gedare Bloom Date: Mon, 21 Sep 2020 11:37:38 -0600 Subject: i386: tweak grammar and style --- user/bsps/bsps-i386.rst | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) (limited to 'user/bsps') diff --git a/user/bsps/bsps-i386.rst b/user/bsps/bsps-i386.rst index 42f3ebf..0b273ee 100644 --- a/user/bsps/bsps-i386.rst +++ b/user/bsps/bsps-i386.rst @@ -131,9 +131,8 @@ inside the Qemu emulator. device. E.g. ``--console=/dev/com1``. COM device name may also be followed by a baud rate like ``--console=/dev/com2,19200`` - .. note:: pc386 BSP family is using 9600 as a default baud rate - for console over UART (/dev/comX). It is also using - 8 data bits, no parity and 1 stop bit. +The pc386 BSP family uses 9600 as a default baud rate +for console over UART (/dev/comX) with 8 data bits, no parity and 1 stop bit. .. option:: --printk= @@ -168,10 +167,8 @@ device is selected based on the device order specified in `Console Drivers`. E.g. ``--gdb=/dev/com2,115200`` instructs BSP to use COM2 device for GDB stub/host communication with the speed of 115200 bauds. - .. note:: default GDB stub/host communication speed and other - communication properties are same like for console over - UART. E.g. 9600 baud rate, 8 data bits, no parity - and 1 stop bit. +The default GDB stub/host is similar to console over UART, i.e., +9600 baud rate, 8 data bits, no parity and 1 stop bit. .. option:: --gdb-break -- cgit v1.2.3