From bb7ddedf96a34893f6aaf4d4af5b71e7d06ea483 Mon Sep 17 00:00:00 2001 From: Kinsey Moore Date: Thu, 4 Jan 2024 15:15:06 -0600 Subject: user/bsps/arm: Add documentation for ZynqMP R5 BSP This adds basic user documentation for running RTEMS on the Cortex-R5 processor on Xilinx Zynq Ultrascale+ MPSoC chips. --- user/bsps/arm/xilinx-zynqmp-rpu.rst | 66 +++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) create mode 100644 user/bsps/arm/xilinx-zynqmp-rpu.rst (limited to 'user/bsps/arm') diff --git a/user/bsps/arm/xilinx-zynqmp-rpu.rst b/user/bsps/arm/xilinx-zynqmp-rpu.rst new file mode 100644 index 0000000..01f9f23 --- /dev/null +++ b/user/bsps/arm/xilinx-zynqmp-rpu.rst @@ -0,0 +1,66 @@ +.. SPDX-License-Identifier: CC-BY-SA-4.0 + +.. Copyright (C) 2024 On-Line Applications Research Corporation (OAR) + +.. _BSP_arm_xilinx_zynqmp_rpu: + +Xilinx ZynqMP RPU +================= + +This BSP supports the Cortex-R5 processor on the Xilinx Zynq UltraScale+ MPSoC +platform. Basic hardware initialization is performed by the Cortex-R5 FSBL and +the BSP. This BSP supports the GICv2 interrupt controller available to the +Cortex-R5 subsystem. Since the Cortex-R5 subsystem only varies in speed, this +BSP should be functional across all chip variants as well as on Xilinx's QEMU +branch. SMP operation is not currently supported. + +Clock Driver +------------ + +The clock driver uses one of the available triple timer counters (TTCs) as the +timer interrupt source. + +Console Driver +-------------- + +The console driver supports the default Qemu emulated ARM PL011 PrimeCell UART +as well as the physical ARM PL011 PrimeCell UART in the ZynqMP hardware. + +Boot on ZynqMP Hardware +----------------------- + +On the ZynqMP RPU, RTEMS can be started by Cortes-R5 u-boot, Cortex-A53 u-boot, +via JTAG, or directly as part of BOOT.bin. For quick turnaround during testing, +it is recommended to use Cortex-R5 u-boot to avoid repeated BOOT.bin generation +and to ensure that the Cortex-R5 FSBL is run. + +Hardware Boot Image Generation +------------------------------ + +When generating BOOT.bin from components, the BIF file should include at least +entries for the Cortex-R5 FSBL ([bootloader,destination_cpu=r5-0]) and the +Cortex-R5 application ([destination_cpu=r5-0]). The Cortex-R5 application should +be either a u-boot or RTEMS ELF binary. The Cortex-R5 u-boot binary can be +obtained by building it from Xilinx's u-boot repository. The Cortex-R5 FSBL can +be obtained setting up an appropriate platform project in Xilinx's current +development system. + +Boot on QEMU +------------ +The executable image is booted by Qemu in ELF format. + +Running Executables on QEMU +--------------------------- + +Xilinx's qemu-devicetrees repository must be used in conjunction with the Xilinx +QEMU available via RSB. Executables generated by this BSP can be run using the +following command: + +.. code-block:: shell + + qemu-system-aarch64 -no-reboot -nographic -M arm-generic-fdt -serial null \ + -serial mon:stdio -device loader,file=example.exe,cpu-num=4 \ + -device loader,addr=0xff5e023c,data=0x80088fde,data-len=4 \ + -device loader,addr=0xff9a0000,data=0x80000218,data-len=4 \ + -hw-dtb /xlnx-qemu-devtrees-path/LATEST/SINGLE_ARCH/board-zynqmp-zcu102.dtb \ + -m 4096 -display none -- cgit v1.2.3