From 8b643359868d044ef0f1f3432dd49594aae6c6a2 Mon Sep 17 00:00:00 2001
From: Chris Johns <chrisj@rtems.org>
Date: Wed, 2 Nov 2016 12:09:54 +1100
Subject: RSB: Finish reformatting after moving from asciidocs.

---
 rsb/commands.rst | 323 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 323 insertions(+)
 create mode 100644 rsb/commands.rst

(limited to 'rsb/commands.rst')

diff --git a/rsb/commands.rst b/rsb/commands.rst
new file mode 100644
index 0000000..4c8160a
--- /dev/null
+++ b/rsb/commands.rst
@@ -0,0 +1,323 @@
+.. comment SPDX-License-Identifier: CC-BY-SA-4.0
+
+.. comment COPYRIGHT (c) 2012 - 2016.
+.. comment Chris Johns <chrisj@rtems.org>
+
+Commands
+########
+
+Checker (sb-check)
+~~~~~~~~~~~~~~~~~~
+
+This commands checks your system is set up correctly. Most options are ignored::
+
+    $ ../source-builder/sb-check --help
+    sb-check: [options] [args]
+    RTEMS Source Builder, an RTEMS Tools Project (c) 2012-2013 Chris Johns
+    Options and arguments:
+    --force                : Force the build to proceed
+    --quiet                : Quiet output (not used)
+    --trace                : Trace the execution
+    --dry-run              : Do everything but actually run the build
+    --warn-all             : Generate warnings
+    --no-clean             : Do not clean up the build tree
+    --always-clean         : Always clean the build tree, even with an error
+    --jobs                 : Run with specified number of jobs, default: num CPUs.
+    --host                 : Set the host triplet
+    --build                : Set the build triplet
+    --target               : Set the target triplet
+    --prefix path          : Tools build prefix, ie where they are installed
+    --topdir path          : Top of the build tree, default is $PWD
+    --configdir path       : Path to the configuration directory, default: ./config
+    --builddir path        : Path to the build directory, default: ./build
+    --sourcedir path       : Path to the source directory, default: ./source
+    --tmppath path         : Path to the temp directory, default: ./tmp
+    --macros file[,[file]  : Macro format files to load after the defaults
+    --log file             : Log file where all build out is written too
+    --url url[,url]        : URL to look for source
+    --no-download          : Disable the source downloader
+    --targetcflags flags   : List of C flags for the target code
+    --targetcxxflags flags : List of C++ flags for the target code
+    --libstdcxxflags flags : List of C++ flags to build the target libstdc++ code
+    --with-<label>         : Add the --with-<label> to the build
+    --without-<label>      : Add the --without-<label> to the build
+    --regression           : Set --no-install, --keep-going and --always-clean
+    $ ../source-builder/sb-check
+    RTEMS Source Builder - Check, v0.2.0
+    Environment is ok
+
+Defaults (sb-defaults)
+~~~~~~~~~~~~~~~~~~~~~~
+
+This commands outputs and the default macros for your when given no
+arguments. Most options are ignored::
+
+    $ ../source-builder/sb-defaults --help
+    sb-defaults: [options] [args]
+    RTEMS Source Builder, an RTEMS Tools Project (c) 2012-2013 Chris Johns
+    Options and arguments:
+    --force                : Force the build to proceed
+    --quiet                : Quiet output (not used)
+    --trace                : Trace the execution
+    --dry-run              : Do everything but actually run the build
+    --warn-all             : Generate warnings
+    --no-clean             : Do not clean up the build tree
+    --always-clean         : Always clean the build tree, even with an error
+    --jobs                 : Run with specified number of jobs, default: num CPUs.
+    --host                 : Set the host triplet
+    --build                : Set the build triplet
+    --target               : Set the target triplet
+    --prefix path          : Tools build prefix, ie where they are installed
+    --topdir path          : Top of the build tree, default is $PWD
+    --configdir path       : Path to the configuration directory, default: ./config
+    --builddir path        : Path to the build directory, default: ./build
+    --sourcedir path       : Path to the source directory, default: ./source
+    --tmppath path         : Path to the temp directory, default: ./tmp
+    --macros file[,[file]  : Macro format files to load after the defaults
+    --log file             : Log file where all build out is written too
+    --url url[,url]        : URL to look for source
+    --no-download          : Disable the source downloader
+    --targetcflags flags   : List of C flags for the target code
+    --targetcxxflags flags : List of C++ flags for the target code
+    --libstdcxxflags flags : List of C++ flags to build the target libstdc++ code
+    --with-<label>         : Add the --with-<label> to the build
+    --without-<label>      : Add the --without-<label> to the build
+    --regression           : Set --no-install, --keep-going and --always-clean
+
+Set Builder (sb-set-builder)
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+This command builds a set::
+
+    $ ../source-builder/sb-set-builder --help
+    RTEMS Source Builder, an RTEMS Tools Project (c) 2012-2013 Chris Johns
+    Options and arguments:
+    --force                : Force the build to proceed
+    --quiet                : Quiet output (not used)
+    --trace                : Trace the execution
+    --dry-run              : Do everything but actually run the build
+    --warn-all             : Generate warnings
+    --no-clean             : Do not clean up the build tree
+    --always-clean         : Always clean the build tree, even with an error
+    --regression           : Set --no-install, --keep-going and --always-clean
+    ---jobs                 : Run with specified number of jobs, default: num CPUs.
+    --host                 : Set the host triplet
+    --build                : Set the build triplet
+    --target               : Set the target triplet
+    --prefix path          : Tools build prefix, ie where they are installed
+    --topdir path          : Top of the build tree, default is $PWD
+    --configdir path       : Path to the configuration directory, default: ./config
+    --builddir path        : Path to the build directory, default: ./build
+    --sourcedir path       : Path to the source directory, default: ./source
+    --tmppath path         : Path to the temp directory, default: ./tmp
+    --macros file[,[file]  : Macro format files to load after the defaults
+    --log file             : Log file where all build out is written too
+    --url url[,url]        : URL to look for source
+    --no-download          : Disable the source downloader
+    --no-install           : Do not install the packages to the prefix
+    --targetcflags flags   : List of C flags for the target code
+    --targetcxxflags flags : List of C++ flags for the target code
+    --libstdcxxflags flags : List of C++ flags to build the target libstdc++ code
+    --with-<label>         : Add the --with-<label> to the build
+    --without-<label>      : Add the --without-<label> to the build
+    --mail-from            : Email address the report is from.
+    --mail-to              : Email address to send the email too.
+    --mail                 : Send email report or results.
+    --smtp-host            : SMTP host to send via.
+    --no-report            : Do not create a package report.
+    --report-format        : The report format (text, html, asciidoc).
+    --bset-tar-file        : Create a build set tar file
+    --pkg-tar-files        : Create package tar files
+    --list-bsets           : List available build sets
+    --list-configs         : List available configurations
+    --list-deps            : List the dependent files.
+
+The ``arguments`` are a list of build sets to build.
+
+**Options**:
+
+``--force``:
+  Force the build to proceed even if the host check fails. Typically this
+  happens if executable files are found in the path at a different location to
+  the host defaults.
+
+``--trace``:
+  Trace enable printing of debug information to stdout. It is really only of
+  use to RTEMS Source Builder's developers.
+
+``--dry-run``:
+  Do everything but actually run the build commands. This is useful when
+  checking a new configuration parses cleanly.
+
+``--warn-all``:
+  Generate warnings.
+
+``--no-clean``:
+  Do not clean up the build tree during the cleaning phase of the build. This
+  leaves the source and the build output on disk so you can make changes, or
+  amend or generate new patches. It also allows you to review configure type
+  output such as ``config.log``.
+
+``--always-clean``:
+  Clean away the results of a build even if the build fails. This is normally
+  used with ``--keep-going`` when regression testing to see which build sets
+  fail to build. It keeps the disk usage down.
+
+``--jobs``:
+  Control the number of jobs make is given. The jobs can be ``none`` for only 1
+  job, ``half`` so the number of jobs is half the number of detected cores, a
+  fraction such as ``0.25`` so the number of jobs is a quarter of the number of
+  detected cores and a number such as ``25`` which forces the number of jobs to
+  that number.
+
+``--host``:
+  Set the host triplet value. Be careful with this option.
+
+``--build``:
+  Set the build triplet. Be careful with this option.
+
+``--target``:
+  Set the target triplet. Be careful with this option. This is useful if you
+  have a generic configuration script that can work for a range of
+  architectures.
+
+``--prefix path``:
+  Tools build prefix, ie where they are installed.
+
+``--topdir path``:
+  Top of the build tree, that is the current directory you are in.
+
+``--configdir path``:
+  Path to the configuration directory. This overrides the built in defaults.
+
+``--builddir path``:
+  Path to the build directory. This overrides the default of +build+.
+
+``--sourcedir path``:
+  Path to the source directory. This overrides the default of +source+.
+
+``--tmppath path``:
+  Path to the temporary directory. This overrides the default of +tmp+.
+
+``--macros files``:
+  Macro files to load. The configuration directory path is searched.
+
+``--log file``:
+  Log all the output from the build process. The output is directed to +stdout+
+  if no log file is provided.
+
+``--url url``:
+  URL to look for source when downloading. This is can be comma separate list.
+
+``--no-download``:
+  Disable downloading of source and patches. If the source is not found an
+  error is raised.
+
+``--targetcflags flags``:
+  List of C flags for the target code. This allows for specific local
+  customisation when testing new variations.
+
+``--targetcxxflags flags``:
+  List of C++ flags for the target code. This allows for specific local
+  customisation when testing new variations.
+
+``--libstdcxxflags flags``:
+  List of C++ flags to build the target libstdc++ code. This allows for
+  specific local customisation when testing new variations.
+
+``--with-<label>``:
+  Add the ``--with-<label>`` to the build. This can be tested for in a script
+  with the ``%bconf_with`` macro.
+
+``--without-<label>``:
+  Add the ``--without-<label>`` to the build. This can be tested for in a
+  script with the ``%bconf_without`` macro.
+
+``--mail-from``:
+  Set the from mail address if report mailing is enabled.
+
+``--mail-to``:
+  Set the to mail address if report mailing is enabled. The report is mailed to
+  this address.
+
+``--mail``:
+  Mail the build report to the mail to address.
+
+``--smtp-host``:
+  The SMTP host to use to send the email. The default is ``localhost``.
+
+``--no-report``:
+  Do not create a report format.
+
+``--report-format format``:
+  The report format can be ``text`` or ``html``. The default is ``html``.
+
+``--keep-going``:
+  Do not stop on error. This is useful if your build sets performs a large
+  number of testing related builds and there are errors.
+
+``--always-clean``:
+  Always clean the build tree even with a failure.
+
+``--no-install``:
+  Do not install the packages to the prefix. Use this if you are only after the
+  tar files.
+
+``--regression``:
+  A convenience option which is the same as ``--no-install``, ``--keep-going``
+  and ``--always-clean``.
+
+``--bset-tar-file``:
+  Create a build set tar file. This is a single tar file of all the packages in
+  the build set.
+
+``--pkg-tar-files``:
+  Create package tar files. A tar file will be created for each package built
+  in a build set.
+
+``--list-bsets``:
+  List available build sets.
+
+``--list-configs``:
+  List available configurations.
+
+``--list-deps``:
+  Print a list of dependent files used by a build set. Dependent files have a
+  ``dep[?]` prefix where ``?`` is a number. The files are listed alphabetically.
+
+Set Builder (sb-builder)
+~~~~~~~~~~~~~~~~~~~~~~~~
+
+This command builds a configuration as described in a configuration
+file. Configuration files have the extension of ``.cfg``::
+
+    $ ./source-builder/sb-builder --help
+    sb-builder: [options] [args]
+    RTEMS Source Builder, an RTEMS Tools Project (c) 2012 Chris Johns
+    Options and arguments:
+    --force                : Force the build to proceed
+    --quiet                : Quiet output (not used)
+    --trace                : Trace the execution
+    --dry-run              : Do everything but actually run the build
+    --warn-all             : Generate warnings
+    --no-clean             : Do not clean up the build tree
+    --always-clean         : Always clean the build tree, even with an error
+    --jobs                 : Run with specified number of jobs, default: num CPUs.
+    --host                 : Set the host triplet
+    --build                : Set the build triplet
+    --target               : Set the target triplet
+    --prefix path          : Tools build prefix, ie where they are installed
+    --topdir path          : Top of the build tree, default is $PWD
+    --configdir path       : Path to the configuration directory, default: ./config
+    --builddir path        : Path to the build directory, default: ./build
+    --sourcedir path       : Path to the source directory, default: ./source
+    --tmppath path         : Path to the temp directory, default: ./tmp
+    --macros file[,[file]  : Macro format files to load after the defaults
+    --log file             : Log file where all build out is written too
+    --url url[,url]        : URL to look for source
+    --targetcflags flags   : List of C flags for the target code
+    --targetcxxflags flags : List of C++ flags for the target code
+    --libstdcxxflags flags : List of C++ flags to build the target libstdc++ code
+    --with-<label>         : Add the --with-<label> to the build
+    --without-<label>      : Add the --without-<label> to the build
+    --list-configs         : List available configurations
-- 
cgit v1.2.3