From c6f8e512b916147faae59687d13611291ef0f426 Mon Sep 17 00:00:00 2001 From: Joel Sherrill Date: Thu, 12 Oct 2017 18:50:59 -0500 Subject: Shorten the name of the BSP and Device Driver Development Guide Old name: RTEMS BSP and Device Driver Development Guide This is long and causes problems in the PDF output. This patch changes the name to: RTEMS BSP and Driver Guide Closes #3141. --- cpu-supplement/lattice_micro32.rst | 8 +------- cpu-supplement/port.rst | 8 ++++---- 2 files changed, 5 insertions(+), 11 deletions(-) (limited to 'cpu-supplement') diff --git a/cpu-supplement/lattice_micro32.rst b/cpu-supplement/lattice_micro32.rst index 07be31c..ba3ab9d 100644 --- a/cpu-supplement/lattice_micro32.rst +++ b/cpu-supplement/lattice_micro32.rst @@ -186,13 +186,7 @@ Thread-local storage is not implemented. Board Support Packages ====================== -An RTEMS Board Support Package (BSP) must be designed to support a particular -processor model and target board combination. - -In each of the architecture specific chapters, this section will present a -discussion of architecture specific BSP issues. For more information on -developing a BSP, refer to BSP and Device Driver Development Guide and the -chapter titled Board Support Packages in the RTEMS Applications User's Guide. +There are no Lattice Micro32 specific notes on BSPs. System Reset ------------ diff --git a/cpu-supplement/port.rst b/cpu-supplement/port.rst index 68c1471..dec91a7 100644 --- a/cpu-supplement/port.rst +++ b/cpu-supplement/port.rst @@ -408,8 +408,8 @@ processor model and target board combination. In each of the architecture specific chapters, this section will present a discussion of architecture specific BSP issues. For more information on -developing a BSP, refer to BSP and Device Driver Development Guide and the -chapter titled Board Support Packages in the RTEMS Applications User's Guide. +developing a BSP, refer to *RTEMS BSP and Driver Guide* chapter titled +``Board Support Packages`` in the *RTEMS Classic API Guide*. System Reset ------------ @@ -418,5 +418,5 @@ An RTEMS based application is initiated or re-initiated when the processor is reset or transfer is passed to it from a boot monitor or ROM monitor. In each of the architecture specific chapters, this subsection describes the -actions that the BSP must tak assuming the application gets control when the -microprocessor is reset. +actions that the BSP must take assuming the application gets control +when the microprocessor is reset. -- cgit v1.2.3