From aebb6fd7c7abd598d803ca0b8013e2761633f03a Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Thu, 20 Aug 2020 10:06:42 +0200 Subject: c-user: Split up region manager This makes it easier to automatically generate parts of the manager documentation in the future. Update #3993. --- c-user/region/background.rst | 87 +++++++ c-user/region/directives.rst | 561 +++++++++++++++++++++++++++++++++++++++++ c-user/region/index.rst | 15 ++ c-user/region/introduction.rst | 29 +++ c-user/region/operations.rst | 101 ++++++++ 5 files changed, 793 insertions(+) create mode 100644 c-user/region/background.rst create mode 100644 c-user/region/directives.rst create mode 100644 c-user/region/index.rst create mode 100644 c-user/region/introduction.rst create mode 100644 c-user/region/operations.rst (limited to 'c-user/region') diff --git a/c-user/region/background.rst b/c-user/region/background.rst new file mode 100644 index 0000000..cf22a76 --- /dev/null +++ b/c-user/region/background.rst @@ -0,0 +1,87 @@ +.. SPDX-License-Identifier: CC-BY-SA-4.0 + +.. Copyright (C) 1988, 2008 On-Line Applications Research Corporation (OAR) + +Background +========== + +.. index:: region, definition +.. index:: segment, definition + +Region Manager Definitions +-------------------------- + +A region makes up a physically contiguous memory space with user-defined +boundaries from which variable-sized segments are dynamically allocated and +deallocated. A segment is a variable size section of memory which is allocated +in multiples of a user-defined page size. This page size is required to be a +multiple of four greater than or equal to four. For example, if a request for +a 350-byte segment is made in a region with 256-byte pages, then a 512-byte +segment is allocated. + +Regions are organized as doubly linked chains of variable sized memory blocks. +Memory requests are allocated using a first-fit algorithm. If available, the +requester receives the number of bytes requested (rounded up to the next page +size). RTEMS requires some overhead from the region's memory for each segment +that is allocated. Therefore, an application should only modify the memory of +a segment that has been obtained from the region. The application should NOT +modify the memory outside of any obtained segments and within the region's +boundaries while the region is currently active in the system. + +Upon return to the region, the free block is coalesced with its neighbors (if +free) on both sides to produce the largest possible unused block. + +.. index:: region attribute set, building + +Building an Attribute Set +------------------------- + +In general, an attribute set is built by a bitwise OR of the desired attribute +components. The set of valid region attributes is provided in the following +table: + +.. list-table:: + :class: rtems-table + + * - ``RTEMS_FIFO`` + - tasks wait by FIFO (default) + * - ``RTEMS_PRIORITY`` + - tasks wait by priority + +Attribute values are specifically designed to be mutually exclusive, therefore +bitwise OR and addition operations are equivalent as long as each attribute +appears exactly once in the component list. An attribute listed as a default +is not required to appear in the attribute list, although it is a good +programming practice to specify default attributes. If all defaults are +desired, the attribute ``RTEMS_DEFAULT_ATTRIBUTES`` should be specified on this +call. + +This example demonstrates the attribute_set parameter needed to create a region +with the task priority waiting queue discipline. The attribute_set parameter +to the ``rtems_region_create`` directive should be ``RTEMS_PRIORITY``. + +Building an Option Set +---------------------- + +In general, an option is built by a bitwise OR of the desired option +components. The set of valid options for the ``rtems_region_get_segment`` +directive are listed in the following table: + +.. list-table:: + :class: rtems-table + + * - ``RTEMS_WAIT`` + - task will wait for segment (default) + * - ``RTEMS_NO_WAIT`` + - task should not wait + +Option values are specifically designed to be mutually exclusive, therefore +bitwise OR and addition operations are equivalent as long as each option +appears exactly once in the component list. An option listed as a default is +not required to appear in the option list, although it is a good programming +practice to specify default options. If all defaults are desired, the +option ``RTEMS_DEFAULT_OPTIONS`` should be specified on this call. + +This example demonstrates the option parameter needed to poll for a segment. +The option parameter passed to the ``rtems_region_get_segment`` directive +should be ``RTEMS_NO_WAIT``. diff --git a/c-user/region/directives.rst b/c-user/region/directives.rst new file mode 100644 index 0000000..be994f6 --- /dev/null +++ b/c-user/region/directives.rst @@ -0,0 +1,561 @@ +.. SPDX-License-Identifier: CC-BY-SA-4.0 + +.. Copyright (C) 1988, 2008 On-Line Applications Research Corporation (OAR) + +Directives +========== + +This section details the region manager's directives. A subsection is +dedicated to each of this manager's directives and describes the calling +sequence, related constants, usage, and status codes. + +.. raw:: latex + + \clearpage + +.. index:: create a region + +.. _rtems_region_create: + +REGION_CREATE - Create a region +------------------------------- + +CALLING SEQUENCE: + .. code-block:: c + + rtems_status_code rtems_region_create( + rtems_name name, + void *starting_address, + uintptr_t length, + uintptr_t page_size, + rtems_attribute attribute_set, + rtems_id *id + ); + +DIRECTIVE STATUS CODES: + .. list-table:: + :class: rtems-table + + * - ``RTEMS_SUCCESSFUL`` + - region created successfully + * - ``RTEMS_INVALID_NAME`` + - invalid region name + * - ``RTEMS_INVALID_ADDRESS`` + - ``id`` is NULL + * - ``RTEMS_INVALID_ADDRESS`` + - ``starting_address`` is NULL + * - ``RTEMS_TOO_MANY`` + - too many regions created + * - ``RTEMS_INVALID_SIZE`` + - invalid page size + * - ``RTEMS_INVALID_SIZE`` + - the memory area defined by the starting address and the length + parameters is too small + +DESCRIPTION: + This directive creates a region from a contiguous memory area + which starts at starting_address and is length bytes long. The memory area + must be large enough to contain some internal region administration data. + Segments allocated from the region will be a multiple of page_size bytes in + length. The specified page size will be aligned to an + architecture-specific minimum alignment if necessary. + + The assigned region id is returned in id. This region id is used as an + argument to other region related directives to access the region. + + For control and maintenance of the region, RTEMS allocates and initializes + an RNCB from the RNCB free pool. Thus memory from the region is not used + to store the RNCB. However, some overhead within the region is required by + RTEMS each time a segment is constructed in the region. + + Specifying ``RTEMS_PRIORITY`` in attribute_set causes tasks waiting for a + segment to be serviced according to task priority. Specifying + ``RTEMS_FIFO`` in attribute_set or selecting ``RTEMS_DEFAULT_ATTRIBUTES`` + will cause waiting tasks to be serviced in First In-First Out order. + +NOTES: + This directive will obtain the allocator mutex and may cause the calling + task to be preempted. + + The following region attribute constants are defined by RTEMS: + + .. list-table:: + :class: rtems-table + + * - ``RTEMS_FIFO`` + - tasks wait by FIFO (default) + * - ``RTEMS_PRIORITY`` + - tasks wait by priority + +.. raw:: latex + + \clearpage + +.. index:: get ID of a region +.. index:: obtain ID of a region +.. index:: rtems_region_ident + +.. _rtems_region_ident: + +REGION_IDENT - Get ID of a region +--------------------------------- + +CALLING SEQUENCE: + .. code-block:: c + + rtems_status_code rtems_region_ident( + rtems_name name, + rtems_id *id + ); + +DIRECTIVE STATUS CODES: + .. list-table:: + :class: rtems-table + + * - ``RTEMS_SUCCESSFUL`` + - region identified successfully + * - ``RTEMS_INVALID_ADDRESS`` + - ``id`` is NULL + * - ``RTEMS_INVALID_NAME`` + - region name not found + +DESCRIPTION: + + This directive obtains the region id associated with the region name to be + acquired. If the region name is not unique, then the region id will match + one of the regions with that name. However, this region id is not + guaranteed to correspond to the desired region. The region id is used to + access this region in other region manager directives. + +NOTES: + This directive will not cause the running task to be preempted. + +.. raw:: latex + + \clearpage + +.. index:: delete a region +.. index:: rtems_region_delete + +.. _rtems_region_delete: + +REGION_DELETE - Delete a region +------------------------------- + +CALLING SEQUENCE: + .. code-block:: c + + rtems_status_code rtems_region_delete( + rtems_id id + ); + +DIRECTIVE STATUS CODES: + .. list-table:: + :class: rtems-table + + * - ``RTEMS_SUCCESSFUL`` + - region deleted successfully + * - ``RTEMS_INVALID_ID`` + - invalid region id + * - ``RTEMS_RESOURCE_IN_USE`` + - segments still in use + +DESCRIPTION: + This directive deletes the region specified by id. The region cannot be + deleted if any of its segments are still allocated. The RNCB for the + deleted region is reclaimed by RTEMS. + +NOTES: + This directive will obtain the allocator mutex and may cause the calling + task to be preempted. + + The calling task does not have to be the task that created the region. Any + local task that knows the region id can delete the region. + +.. raw:: latex + + \clearpage + +.. index:: add memory to a region +.. index:: region, add memory +.. index:: rtems_region_extend + +.. _rtems_region_extend: + +REGION_EXTEND - Add memory to a region +-------------------------------------- + +CALLING SEQUENCE: + .. code-block:: c + + rtems_status_code rtems_region_extend( + rtems_id id, + void *starting_address, + uintptr_t length + ); + +DIRECTIVE STATUS CODES: + .. list-table:: + :class: rtems-table + + * - ``RTEMS_SUCCESSFUL`` + - region extended successfully + * - ``RTEMS_INVALID_ADDRESS`` + - ``starting_address`` is NULL + * - ``RTEMS_INVALID_ID`` + - invalid region id + * - ``RTEMS_INVALID_ADDRESS`` + - invalid address of area to add + +DESCRIPTION: + This directive adds the memory area which starts at + :c:data:`starting_address` for :c:data:`length` bytes to the region + specified by :c:data:`id`. + + There are no alignment requirements for the memory area. The memory area + must be big enough to contain some maintenance blocks. It must not overlap + parts of the current heap memory areas. Disconnected memory areas added to + the heap will lead to used blocks which cover the gaps. Extending with an + inappropriate memory area will corrupt the heap resulting in undefined + behaviour. + +NOTES: + This directive will obtain the allocator mutex and may cause the calling + task to be preempted. + + The calling task does not have to be the task that created the region. Any + local task that knows the region identifier can extend the region. + +.. raw:: latex + + \clearpage + +.. index:: get segment from region +.. index:: rtems_region_get_segment + +.. _rtems_region_get_segment: + +REGION_GET_SEGMENT - Get segment from a region +---------------------------------------------- + +CALLING SEQUENCE: + .. code-block:: c + + rtems_status_code rtems_region_get_segment( + rtems_id id, + uintptr_t size, + rtems_option option_set, + rtems_interval timeout, + void **segment + ); + +DIRECTIVE STATUS CODES: + .. list-table:: + :class: rtems-table + + * - ``RTEMS_SUCCESSFUL`` + - segment obtained successfully + * - ``RTEMS_INVALID_ADDRESS`` + - ``segment`` is NULL + * - ``RTEMS_INVALID_ID`` + - invalid region id + * - ``RTEMS_INVALID_SIZE`` + - request is for zero bytes or exceeds the size of maximum segment which is + possible for this region + * - ``RTEMS_UNSATISFIED`` + - segment of requested size not available + * - ``RTEMS_TIMEOUT`` + - timed out waiting for segment + * - ``RTEMS_OBJECT_WAS_DELETED`` + - region deleted while waiting + +DESCRIPTION: + This directive obtains a variable size segment from the region specified by + ``id``. The address of the allocated segment is returned in segment. The + ``RTEMS_WAIT`` and ``RTEMS_NO_WAIT`` components of the options parameter + are used to specify whether the calling tasks wish to wait for a segment to + become available or return immediately if no segment is available. For + either option, if a sufficiently sized segment is available, then the + segment is successfully acquired by returning immediately with the + ``RTEMS_SUCCESSFUL`` status code. + + If the calling task chooses to return immediately and a segment large + enough is not available, then an error code indicating this fact is + returned. If the calling task chooses to wait for the segment and a + segment large enough is not available, then the calling task is placed on + the region's segment wait queue and blocked. If the region was created + with the ``RTEMS_PRIORITY`` option, then the calling task is inserted into + the wait queue according to its priority. However, if the region was + created with the ``RTEMS_FIFO`` option, then the calling task is placed at + the rear of the wait queue. + + The timeout parameter specifies the maximum interval that a task is willing + to wait to obtain a segment. If timeout is set to ``RTEMS_NO_TIMEOUT``, + then the calling task will wait forever. + +NOTES: + This directive will obtain the allocator mutex and may cause the calling + task to be preempted. + + The actual length of the allocated segment may be larger than the requested + size because a segment size is always a multiple of the region's page size. + + The following segment acquisition option constants are defined by RTEMS: + + .. list-table:: + :class: rtems-table + + * - ``RTEMS_WAIT`` + - task will wait for segment (default) + * - ``RTEMS_NO_WAIT`` + - task should not wait + + A clock tick is required to support the timeout functionality of this + directive. + +.. raw:: latex + + \clearpage + +.. index:: return segment to region +.. index:: rtems_region_return_segment + +.. _rtems_region_return_segment: + +REGION_RETURN_SEGMENT - Return segment to a region +-------------------------------------------------- + +CALLING SEQUENCE: + .. code-block:: c + + rtems_status_code rtems_region_return_segment( + rtems_id id, + void *segment + ); + +DIRECTIVE STATUS CODES: + .. list-table:: + :class: rtems-table + + * - ``RTEMS_SUCCESSFUL`` + - segment returned successfully + * - ``RTEMS_INVALID_ADDRESS`` + - ``segment`` is NULL + * - ``RTEMS_INVALID_ID`` + - invalid region id + * - ``RTEMS_INVALID_ADDRESS`` + - segment address not in region + +DESCRIPTION: + This directive returns the segment specified by segment to the region + specified by id. The returned segment is merged with its neighbors to form + the largest possible segment. The first task on the wait queue is examined + to determine if its segment request can now be satisfied. If so, it is + given a segment and unblocked. This process is repeated until the first + task's segment request cannot be satisfied. + +NOTES: + This directive will cause the calling task to be preempted if one or more + local tasks are waiting for a segment and the following conditions exist: + + - a waiting task has a higher priority than the calling task + + - the size of the segment required by the waiting task is less than or + equal to the size of the segment returned. + +.. raw:: latex + + \clearpage + +.. index:: get size of segment +.. index:: rtems_region_get_segment_size + +.. _rtems_region_get_segment_size: + +REGION_GET_SEGMENT_SIZE - Obtain size of a segment +-------------------------------------------------- + +CALLING SEQUENCE: + .. code-block:: c + + rtems_status_code rtems_region_get_segment_size( + rtems_id id, + void *segment, + uintptr_t *size + ); + +DIRECTIVE STATUS CODES: + .. list-table:: + :class: rtems-table + + * - ``RTEMS_SUCCESSFUL`` + - segment obtained successfully + * - ``RTEMS_INVALID_ADDRESS`` + - ``segment`` is NULL + * - ``RTEMS_INVALID_ADDRESS`` + - ``size`` is NULL + * - ``RTEMS_INVALID_ID`` + - invalid region id + * - ``RTEMS_INVALID_ADDRESS`` + - segment address not in region + +DESCRIPTION: + This directive obtains the size in bytes of the specified segment. + +NOTES: + The actual length of the allocated segment may be larger than the requested + size because a segment size is always a multiple of the region's page size. + +.. raw:: latex + + \clearpage + +.. index:: resize segment +.. index:: rtems_region_resize_segment + +.. _rtems_region_resize_segment: + +REGION_RESIZE_SEGMENT - Change size of a segment +------------------------------------------------ + +CALLING SEQUENCE: + .. code-block:: c + + rtems_status_code rtems_region_resize_segment( + rtems_id id, + void *segment, + uintptr_t new_size, + uintptr_t *old_size + ); + +DIRECTIVE STATUS CODES: + .. list-table:: + :class: rtems-table + + * - ``RTEMS_SUCCESSFUL`` + - segment obtained successfully + * - ``RTEMS_INVALID_ADDRESS`` + - ``segment`` is NULL + * - ``RTEMS_INVALID_ADDRESS`` + - ``old_size`` is NULL + * - ``RTEMS_INVALID_ID`` + - invalid region id + * - ``RTEMS_INVALID_ADDRESS`` + - segment address not in region + * - ``RTEMS_UNSATISFIED`` + - unable to make segment larger + +DESCRIPTION: + This directive is used to increase or decrease the size of a segment. When + increasing the size of a segment, it is possible that there is not memory + available contiguous to the segment. In this case, the request is + unsatisfied. + +NOTES: + This directive will obtain the allocator mutex and may cause the calling + task to be preempted. + + If an attempt to increase the size of a segment fails, then the application + may want to allocate a new segment of the desired size, copy the contents + of the original segment to the new, larger segment and then return the + original segment. + +.. raw:: latex + + \clearpage + +.. index:: obtain region information +.. index:: rtems_region_get_information + +.. _rtems_region_get_information: + +REGION_GET_INFORMATION - Get region information +----------------------------------------------- + +CALLING SEQUENCE: + .. code-block:: c + + rtems_status_code rtems_region_get_information( + rtems_id id, + Heap_Information_block *the_info + ); + +DIRECTIVE STATUS CODES: + .. list-table:: + :class: rtems-table + + * - ``RTEMS_SUCCESSFUL`` + - information obtained successfully + * - ``RTEMS_INVALID_ADDRESS`` + - ``the_info`` is NULL + * - ``RTEMS_INVALID_ID`` + - invalid region id + +DESCRIPTION: + This directive is used to obtain information about the used and free memory + in the region specified by ``id``. This is a snapshot at the time + of the call. The information will be returned in the structure pointed to + by ``the_info``. + +NOTES: + This directive will obtain the allocator mutex and may cause the calling + task to be preempted. + + This is primarily intended as a mechanism to obtain a diagnostic information. + This method forms am O(n) scan of the free and an O(n) scan of the + used blocks in the region to calculate the information provided. Given that + the execution time is driven by the number of used and free blocks, it can + take a non-deterministic time to execute. + +.. raw:: latex + + \clearpage + +.. index:: obtain region information on free blocks +.. index:: rtems_region_get_free_information + +.. _rtems_region_get_free_information: + +REGION_GET_FREE_INFORMATION - Get region free information +--------------------------------------------------------- + +CALLING SEQUENCE: + .. code-block:: c + + rtems_status_code rtems_region_get_free_information( + rtems_id id, + Heap_Information_block *the_info + ); + +DIRECTIVE STATUS CODES: + .. list-table:: + :class: rtems-table + + * - ``RTEMS_SUCCESSFUL`` + - information obtained successfully + * - ``RTEMS_INVALID_ADDRESS`` + - ``the_info`` is NULL + * - ``RTEMS_INVALID_ID`` + - invalid region id + +DESCRIPTION: + This directive is used to obtain information about the free memory + in the region specified by ``id``. This is a snapshot at the time + of the call. The information will be returned in the structure pointed to + by ``the_info``. + +NOTES: + This directive will obtain the allocator mutex and may cause the calling + task to be preempted. + + This uses the same structure to return information as the + ``rtems_region_get_information`` directive but does not fill in the + used information. + + This is primarily intended as a mechanism to obtain a diagnostic information. + This method forms am O(n) scan of the free in the region to calculate + the information provided. Given that the execution time is driven by + the number of used and free blocks, it can take a non-deterministic + time to execute. Typically, there are many used blocks and a much smaller + number of used blocks making a call to this directive less expensive than + a call to ``rtems_region_get_information``. diff --git a/c-user/region/index.rst b/c-user/region/index.rst new file mode 100644 index 0000000..90560a8 --- /dev/null +++ b/c-user/region/index.rst @@ -0,0 +1,15 @@ +.. SPDX-License-Identifier: CC-BY-SA-4.0 + +.. Copyright (C) 2020 embedded brains GmbH (http://www.embedded-brains.de) + +.. index:: regions + +Region Manager +************** + +.. toctree:: + + introduction + background + operations + directives diff --git a/c-user/region/introduction.rst b/c-user/region/introduction.rst new file mode 100644 index 0000000..418e397 --- /dev/null +++ b/c-user/region/introduction.rst @@ -0,0 +1,29 @@ +.. SPDX-License-Identifier: CC-BY-SA-4.0 + +.. Copyright (C) 1988, 2008 On-Line Applications Research Corporation (OAR) + +Introduction +============ + +The region manager provides facilities to dynamically allocate memory in +variable sized units. The directives provided by the region manager are: + +- :ref:`rtems_region_create` + +- :ref:`rtems_region_ident` + +- :ref:`rtems_region_delete` + +- :ref:`rtems_region_extend` + +- :ref:`rtems_region_get_segment` + +- :ref:`rtems_region_return_segment` + +- :ref:`rtems_region_get_segment_size` + +- :ref:`rtems_region_resize_segment` + +- :ref:`rtems_region_get_information` + +- :ref:`rtems_region_get_free_information` diff --git a/c-user/region/operations.rst b/c-user/region/operations.rst new file mode 100644 index 0000000..ef41d39 --- /dev/null +++ b/c-user/region/operations.rst @@ -0,0 +1,101 @@ +.. SPDX-License-Identifier: CC-BY-SA-4.0 + +.. Copyright (C) 1988, 2008 On-Line Applications Research Corporation (OAR) + +Operations +========== + +Creating a Region +----------------- + +The ``rtems_region_create`` directive creates a region with the user-defined +name. The user may select FIFO or task priority as the method for placing +waiting tasks in the task wait queue. RTEMS allocates a Region Control Block +(RNCB) from the RNCB free list to maintain the newly created region. RTEMS +also generates a unique region ID which is returned to the calling task. + +It is not possible to calculate the exact number of bytes available to the user +since RTEMS requires overhead for each segment allocated. For example, a +region with one segment that is the size of the entire region has more +available bytes than a region with two segments that collectively are the size +of the entire region. This is because the region with one segment requires +only the overhead for one segment, while the other region requires the overhead +for two segments. + +Due to automatic coalescing, the number of segments in the region dynamically +changes. Therefore, the total overhead required by RTEMS dynamically changes. + +Obtaining Region IDs +-------------------- + +When a region is created, RTEMS generates a unique region ID and assigns it to +the created region until it is deleted. The region ID may be obtained by +either of two methods. First, as the result of an invocation of the +``rtems_region_create`` directive, the region ID is stored in a user provided +location. Second, the region ID may be obtained later using the +``rtems_region_ident`` directive. The region ID is used by other region +manager directives to access this region. + +Adding Memory to a Region +------------------------- + +The ``rtems_region_extend`` directive may be used to add memory to an existing +region. The caller specifies the size in bytes and starting address of the +memory being added. + +Acquiring a Segment +------------------- + +The ``rtems_region_get_segment`` directive attempts to acquire a segment from a +specified region. If the region has enough available free memory, then a +segment is returned successfully to the caller. When the segment cannot be +allocated, one of the following situations applies: + +- By default, the calling task will wait forever to acquire the segment. + +- Specifying the ``RTEMS_NO_WAIT`` option forces an immediate return with an + error status code. + +- Specifying a timeout limits the interval the task will wait before returning + with an error status code. + +If the task waits for the segment, then it is placed in the region's task wait +queue in either FIFO or task priority order. All tasks waiting on a region are +returned an error when the message queue is deleted. + +Releasing a Segment +------------------- + +When a segment is returned to a region by the ``rtems_region_return_segment`` +directive, it is merged with its unallocated neighbors to form the largest +possible segment. The first task on the wait queue is examined to determine if +its segment request can now be satisfied. If so, it is given a segment and +unblocked. This process is repeated until the first task's segment request +cannot be satisfied. + +Obtaining the Size of a Segment +------------------------------- + +The ``rtems_region_get_segment_size`` directive returns the size in bytes of +the specified segment. The size returned includes any "extra" memory included +in the segment because of rounding up to a page size boundary. + +Changing the Size of a Segment +------------------------------ + +The ``rtems_region_resize_segment`` directive is used to change the size in +bytes of the specified segment. The size may be increased or decreased. When +increasing the size of a segment, it is possible that the request cannot be +satisfied. This directive provides functionality similar to the ``realloc()`` +function in the Standard C Library. + +Deleting a Region +----------------- + +A region can be removed from the system and returned to RTEMS with the +``rtems_region_delete`` directive. When a region is deleted, its control block +is returned to the RNCB free list. A region with segments still allocated is +not allowed to be deleted. Any task attempting to do so will be returned an +error. As a result of this directive, all tasks blocked waiting to obtain a +segment from the region will be readied and returned a status code which +indicates that the region was deleted. -- cgit v1.2.3