From 6566e765f927e5b8e30e36e72001a112ada5556b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Cl=C3=A1udio=20Maia?= Date: Thu, 9 Apr 2020 15:34:11 +0100 Subject: user/tools/tester.rst: Clarifies the need of --rtems-tools in rtems-test command line --- user/tools/tester.rst | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/user/tools/tester.rst b/user/tools/tester.rst index c07fc49..9f9933a 100644 --- a/user/tools/tester.rst +++ b/user/tools/tester.rst @@ -280,7 +280,6 @@ BSP build tree: $ ~/development/rtems/test/rtems-tools.git/tester/rtems-test \ --log=log_erc32_run \ --rtems-bsp=erc32-run \ - --rtems-tools=$HOME/development/rtems/5 \ sparc-rtems5/c/erc32/testsuites/samples RTEMS Testing - Tester, 5.not_released [ 1/13] p:0 f:0 u:0 e:0 I:0 B:0 t:0 i:0 | sparc/erc32: base_sp.exe @@ -316,7 +315,6 @@ appearance above, we have the following: * The ``--log`` option sends the output to a log file. By default only failed tests log the complete output. * The ``--rtems-bsp`` option selects the erc32 BSP. -* The path to the RTEMS tools so GDB can be found. * The path to the erc32 BSP tests to run. If you add subdirectories to the path specific tests can be run. * The test results so far. See details below. @@ -332,10 +330,14 @@ appearance above, we have the following: ``sparc-rtems5/c/erc32/testsuites/samples`` then all the executables would have been tested and not just those in samples. -This BSP requires the ``--rtems-tools`` option because the SPARC GDB is the -``sparc-rtems4.11-gdb`` command that is part of the RTEMS tools. Not every BSP -will require this option so you will need to check the specifics of the BSP -configuration you are using in order to determine if it is needed. +.. note:: Some BSPs require the use of the specific target architecture GDB + command (e.g. RTEMS 5 SPARC GDB command is ``sparc-rtems5-gdb``). + As this command is part of the RTEMS tools, the ``--rtems-tools`` + option should be added to the ``rtems-test`` command line, e.g. + ``--rtems-tools=$HOME/development/rtems/5``. + Not every BSP requires this option so you will need to check the + specifics of the BSP configuration you are using in order to + determine if this option is needed. An output line is printed for each test that is executed. The :program:`rtems-test` command by default runs multiple tests in parallel so you will see a number -- cgit v1.2.3