summaryrefslogtreecommitdiffstats
path: root/user (unfollow)
Commit message (Collapse)AuthorFilesLines
45 hoursuser/hosts/posix.rst: Update Ubuntu instructions to 22.xHEADmasterJoel Sherrill1-5/+5
Closes #4821.
2023-01-12riscv: Resurrect RISCV_ENABLE_HTIF_SUPPORTSebastian Huber1-1/+4
Updates #4779.
2023-01-09RISC-V: Update docs on running on QEMU and SpikeHesham Almatary1-3/+23
2023-01-09RISC-V: Remove the RISCV_ENABLE_HTIF_SUPPORT optionHesham Almatary1-5/+1
Closes #4779
2023-01-09Docs: RISC-V Update rv64* BSPs to medany and 0x80000000 start addressHesham Almatary1-15/+12
Closes #4775
2022-12-02Document CONFIGURE_RECORD_INTERRUPTS_ENABLEDSebastian Huber1-60/+5
Close #4769.
2022-11-30user/hosts/windows.rst: flex needs to be installed for msys2Joel Sherrill1-1/+2
Closes #4382.
2022-11-23user/zynqmp: Add information about CFC-400XKinsey Moore1-10/+38
Add a list of known working hardware and commentary about bitstream loading for specific hardware.
2022-11-15user: Add documentation for leon2 and leon3 BSPDaniel Cederman1-2/+72
2022-11-15user: Add documentation for NOEL-V BSPDaniel Cederman1-0/+57
2022-11-11eng, user: update bsp_list to bsplistGedare Bloom1-5/+5
2022-11-11eng, user: update bsp_defaults to bspdefaultsGedare Bloom3-10/+10
2022-11-08Update build system related sections for RTEMS 6Sebastian Huber2-238/+74
Update sections which contained the word "bsp_specs".
2022-10-31bsp/riscv: Add a section about running on QEMUHesham Almatary1-1/+16
2022-10-31bsps/riscv: Remove inaccurate statement about reliance on a boot loaderHesham Almatary1-3/+1
The BSP is capable of initialising the hardware being the first software that takes control on hardware reset (after the bootrom). For instance, using on QEMU's virt platforms, RTEMS runs as a bios without BBL. Similarily, RTEMS can also be run on harware/FPGA and loaded using GDB; the bootrom (or a GDB script) should just set the a0/a1 registers with the boot HART ID and DTB address respectively.
2022-10-29user: Add openSUSE host detailsAlan Cudmore1-2/+13
This patch adds details on the packages needed for the RTEMS source builder on openSUSE Leap 15.4 64 bit. The commands were tested on a new install with the RTEMS source builder master branch.
2022-10-21user/bsps: Update riscv for PolarFire SoCPadmarao Begari1-1/+125
Update the riscv documentation for the Microchip PolarFire SoC BSP variant including information about SMP test procedure for the Microchip PolarFire Icicle Kit.
2022-10-08user/aarch64/raspberrypi4: Boot mechanism explained and updated config.txtMohd Noor Aman1-4/+11
2022-10-07raspberrypi4.rst: Documentation for the new AArch64 Raspberry pi 4B BSPMohd Noor Aman2-0/+103
This patch adds the relevant documentations required for booting the new BSP. JTAG support is added for debugging. I have built the HTML docs and verified them.
2022-09-13user: Add deployment sectionChris Johns2-1/+428
2022-09-12user: Mention that the bsp_specs are goneSebastian Huber1-0/+14
Update #3250.
2022-09-12user: Clarify -fno-common changesSebastian Huber1-8/+8
2022-09-09user: Document arm/fvp BSPSebastian Huber2-0/+40
Close #4202.
2022-09-09user: Document RSB --with/without-newlib-tlsSebastian Huber1-0/+9
Update #4560.
2022-08-12loader.rst: Add documentation for AArch64 supportRyan Long1-1/+11
2022-08-12user/arm/beagle: Fix image path after section changeChris Johns1-1/+1
2022-08-03versions: Update user manualChris Johns8-489/+252
Updates #4695
2022-08-03versions: Update microblaze, powerpc, riscv and x86_64Chris Johns4-11/+12
Updates #4695
2022-08-03versions: Update armChris Johns7-59/+67
Updates #4695
2022-08-03versions: Update aarch64Chris Johns1-2/+2
Updates #4695
2022-07-21zynqmp: Add commentary about lwIP usageKinsey Moore1-0/+12
2022-06-09user/bsps/arm: Second Ethernet on i.MXChristian Mauderer1-0/+17
This adds information how to use a second Ethernet controller on the i.MX BSPs.
2022-06-01user: Document Zynq networkSebastian Huber1-1/+17
Content is from rtems-libbsd/libbsd.txt with minor modifications.
2022-06-01user/bsps/arm: improve stm32h7 BSP descriptionKarel Gardas1-16/+528
This patch adds kind of HOWTO to the stm32h7 BSP description. The howto discusses various tools from STM tool-chain and how to use them in order to configure board for RTEMS and to upload RTEMS application binary to the board. The patch also adds more supported boards to the table. Sponsored-By: Precidata
2022-05-04user: Update architectures supporting TLSSebastian Huber1-3/+4
2022-04-06user/bsps/arm: remove dangling stm32h7 bsp pageKarel Gardas2-33/+0
The page for STM32H7 BSP is twice here, so let's keep the one providing most information.
2022-03-25rtems-docs: add example booting aarch64 image on Xilinx ZCU102Alan Cudmore1-0/+167
This patch is for the rtems-docs repo. I added details on the procedure I used to boot RTEMS images on the Xilinx ZCU102 board. I applied this patch, and generated the HTML docs, and everything looks ok to me.
2022-03-23microblaze: Document BSPs and update CPU supplementAlex White1-2/+147
2022-02-21bsps/imxrt: Generate correctly aligned device treeChristian Mauderer1-2/+4
The device tree has to be aligned correctly. rtems-bin2c has a new parameter for that. This patch uses this parameter to generate the right alignment and makes it more clear how to use the generated C file.
2022-01-24user/hosts/posix.rst: Replace Cent)S with CentOSJoel Sherrill1-1/+1
2021-12-22Update package list for UbuntuRyan Long1-6/+6
Updated the latest version referenced of Ubuntu to 20.04, updated package list, and identified what packages need to still be installed afterwards to pass sb-check. Closes #4110
2021-09-27posix.rst: Add info for FreeBSD 13Ryan Long1-0/+7
Add list of additional packages needed to build RTEMS environment for FreeBSD 13.
2021-09-23user/testing: Add the %wait directiveChris Johns2-10/+86
2021-08-18bsps/raspberrypi: Change firmware version, add SPI & I2C supportpranav1-6/+45
2021-07-29user/imxrt: Add notes about problems with EVBChristian Mauderer1-0/+9
There are some possible problems with the i.MXRT1050 evaluation board. Make some notes about that in the BSP manual.
2021-07-15user/bsps/aarch64: Minor formatting fixStephen Clark2-6/+10
Fixed formatting error in user/bsps/aarch64/a53.rst and user/bsps/aarch64/xilinx-zynqmp.rst.
2021-07-15xilinx-zynqmp.rst: Documented SDIO driverStephen Clark1-0/+14
Added documentation for SDIO driver.
2021-07-15user: Update ZynqMP network configurationKinsey Moore1-8/+3
Network configuration is now automatic and requires no user configuration.
2021-07-02user/bsps/imxrt: Info about ARM PLL frequencyChristian Mauderer1-0/+20
Update #4180
2021-07-02user/bsps/imxrt: Fix typoChristian Mauderer1-1/+1