diff options
Diffstat (limited to 'user/start/tools.rst')
| -rw-r--r-- | user/start/tools.rst | 128 |
1 files changed, 40 insertions, 88 deletions
diff --git a/user/start/tools.rst b/user/start/tools.rst index 07dc1e0..c3f039b 100644 --- a/user/start/tools.rst +++ b/user/start/tools.rst @@ -2,49 +2,24 @@ .. Copyright (C) 2019 embedded brains GmbH .. Copyright (C) 2019 Sebastian Huber +.. Copyright (C) 2020 Chris Johns .. _QuickStartTools: Install the Tool Suite ====================== -You have chosen an installation prefix and cloned two RTEMS repositories in the -previous sections. We have chosen :file:`$HOME/quick-start/rtems/5` as the -installation prefix and cloned the repositories in -:file:`$HOME/quick-start/src`. - -You must select the -:ref:`target architecture <TargetArchitectures>` for which you need a tool -suite. In this quick start chapter we choose `sparc-rtems5`. The -`sparc-rtems5` is the tool suite name for the SPARC architecture and RTEMS -version 5. The tool suite for RTEMS and the RTEMS sources are tightly coupled. -For example, do not use a RTEMS version 5 tool suite with RTEMS version 4.11 -sources and vice versa. We use the RSB in two steps. The first step is to -download additional sources and patches. Afterwards, you could disconnect your -host computer from the internet. It is no longer required to work with RTEMS. +You have chosen an installation prefix, the BSP to build, the tool's +architecure and prepared the source for the RSB in the previous sections. We +have chosen :file:`$HOME/quick-start/rtems/5` as the installation prefix, the +``erc32`` BSP and the SPARC architecture name of ``sparc-rtems5``, and unpacked +the RSB source in :file:`$HOME/quick-start/src`. -.. code-block:: none - - cd $HOME/quick-start/src/rsb/rtems - ../source-builder/sb-set-builder --source-only-download 5/rtems-sparc - -This command should output something like this (omitted lines are denoted by -...): - -.. code-block:: none - - RTEMS Source Builder - Set Builder, 5 (98588a55961a) - warning: exe: absolute exe found in path: (__unzip) /usr/local/bin/unzip - Build Set: 5/rtems-sparc - ... - download: https://ftp.gnu.org/gnu/gcc/gcc-7.4.0/gcc-7.4.0.tar.xz -> sources/gcc-7.4.0.tar.xz - ... - Build Sizes: usage: 0.000B total: 141.738MB (sources: 141.559MB, patches: 183.888KB, installed 0.000B) - Build Set: Time 0:01:17.613061 +The tool suite for RTEMS and the RTEMS sources are tightly coupled. For +example, do not use a RTEMS version 5 tool suite with RTEMS version 4.11 +sources and vice versa. -If you encounter errors in the first step, check your internet connection, -firewall settings, virus scanners and the availability of the download servers. -The seconds step is to build and install the tool suite. +Build and install the tool suite: .. code-block:: none @@ -52,75 +27,52 @@ The seconds step is to build and install the tool suite. ../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/5 5/rtems-sparc This command should output something like this (omitted lines are denoted by -...): +...). The build host appears as part of the name of the package being +built. The name you see may vary depending on the host you are using: .. code-block:: none - RTEMS Source Builder - Set Builder, 5 (98588a55961a) - warning: exe: absolute exe found in path: (__unzip) /usr/local/bin/unzip + RTEMS Source Builder - Set Builder, 5.1.0 Build Set: 5/rtems-sparc ... - config: tools/rtems-gcc-7.4.0-newlib-3e24fbf6f.cfg - package: sparc-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1 - building: sparc-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1 - sizes: sparc-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1: 4.651GB (installed: 879.191MB) - cleaning: sparc-rtems5-gcc-7.4.0-newlib-3e24fbf6f-x86_64-freebsd12.0-1 + config: tools/rtems-binutils-2.34.cfg + package: sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1 + building: sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1 + sizes: sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1: 305.866MB (installed: 29.966MB) + cleaning: sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1 + reporting: tools/rtems-binutils-2.34.cfg -> sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1.txt + reporting: tools/rtems-binutils-2.34.cfg -> sparc-rtems5-binutils-2.34-x86_64-freebsd12.1-1.xml + config: tools/rtems-gcc-7.5.0-newlib-fbaa096.cfg + package: sparc-rtems5-gcc-7.5.0-newlib-fbaa096-x86_64-freebsd12.1-1 + building: sparc-rtems5-gcc-7.5.0-newlib-fbaa096-x86_64-freebsd12.1-1 .... - Build Sizes: usage: 5.618GB total: 1.105GB (sources: 141.559MB, patches: 185.823KB, installed 989.908MB) - Build Set: Time 0:22:02.262039 + Build Sizes: usage: 5.684GB total: 1.112GB (sources: 143.803MB, patches: 21.348KB, installed 995.188MB) + Build Set: Time 0:21:35.626294 -In case the seconds step was successful, you can check if for example the cross -C compiler works with the following command: +Once the build has successfully completed you can check if the cross C compiler +works with the following command: .. code-block:: none - $HOME/quick-start/rtems/5/bin/sparc-rtems5-gcc --version --verbose + $HOME/quick-start/rtems/5/bin/sparc-rtems5-gcc --version -This command should output something like below. In this output the actual -prefix path was replaced by ``$PREFIX``. The ``compiled by`` line depends on -the native C++ compiler of your host computer. In the output you see the Git -hash of the RSB. This helps you to identify the exact sources which were used -to build the cross compiler of your RTEMS tool suite. +This command should output something like below. The version informtion helps +you to identify the exact sources used to build the cross compiler of your +RTEMS tool suite. In the output you see the version of RTEMS or the hash from +the RSB repository if you are building using a Git repository clone. The Newlib +hash is the version of Newlib in the RTEMS's github +`sourceware-mirror-newlib-cygwin +<https://github.com/RTEMS/sourceware-mirror-newlib-cygwin>`_ repository. The +``sources`` and ``patches`` directories created by the RSB contain all the +source code used. .. code-block:: none - Using built-in specs. - COLLECT_GCC=$PREFIX/bin/sparc-rtems5-gcc - COLLECT_LTO_WRAPPER=$PREFIX/bin/../libexec/gcc/sparc-rtems5/7.4.0/lto-wrapper - sparc-rtems5-gcc (GCC) 7.4.0 20181206 (RTEMS 5, RSB 98588a55961a92f5d27bfd756dfc9e31b2b1bf98, Newlib 3e24fbf6f) + sparc-rtems5-gcc (GCC) 7.5.0 20191114 (RTEMS 5, RSB 5.1.0, Newlib fbaa096) Copyright (C) 2017 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - Target: sparc-rtems5 - Configured with: ../gcc-7.4.0/configure --prefix=$PREFIX --bindir=$PREFIX/bin --exec_prefix=$PREFIX --includedir=$PREFIX/include --libdir=$PREFIX/lib --libexecdir=$PREFIX/libexec --mandir=$PREFIX/share/man --infodir=$PREFIX/share/info --datadir=$PREFIX/share --build=x86_64-freebsd12.0 --host=x86_64-freebsd12.0 --target=sparc-rtems5 --disable-libstdcxx-pch --with-gnu-as --with-gnu-ld --verbose --with-newlib --disable-nls --without-included-gettext --disable-win32-registry --enable-version-specific-runtime-libs --disable-lto --enable-newlib-io-c99-formats --enable-newlib-iconv --enable-newlib-iconv-encodings=big5,cp775,cp850,cp852,cp855,cp866,euc_jp,euc_kr,euc_tw,iso_8859_1,iso_8859_10,iso_8859_11,iso_8859_13,iso_8859_14,iso_8859_15,iso_8859_2,iso_8859_3,iso_8859_4,iso_8859_5,iso_8859_6,iso_8859_7,iso_8859_8,iso_8859_9,iso_ir_111,koi8_r,koi8_ru,koi8_u,koi8_uni,ucs_2,ucs_2_internal,ucs_2be,ucs_2le,ucs_4,ucs_4_internal,ucs_4be,ucs_4le,us_ascii,utf_16,utf_16be,utf_16le,utf_8,win_1250,win_1251,win_1252,win_1253,win_1254,win_1255,win_1256,win_1257,win_1258 --enable-threads --disable-plugin --enable-libgomp --enable-languages=c,c++ - Thread model: rtems - gcc version 7.4.0 20181206 (RTEMS 5, RSB 98588a55961a92f5d27bfd756dfc9e31b2b1bf98, Newlib 3e24fbf6f) (GCC) - COLLECT_GCC_OPTIONS='--version' '-v' '-mcpu=v7' - $PREFIX/bin/../libexec/gcc/sparc-rtems5/7.4.0/cc1 -quiet -v -iprefix $PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0/ help-dummy -quiet -dumpbase help-dummy -mcpu=v7 -auxbase help-dummy -version --version -o /tmp//ccuAN1wc.s - GNU C11 (GCC) version 7.4.0 20181206 (RTEMS 5, RSB 98588a55961a92f5d27bfd756dfc9e31b2b1bf98, Newlib 3e24fbf6f) (sparc-rtems5) - compiled by GNU C version 4.2.1 Compatible FreeBSD Clang 6.0.1 (tags/RELEASE_601/final 335540), GMP version 6.1.0, MPFR version 3.1.4, MPC version 1.0.3, isl version isl-0.16.1-GMP - - GGC heuristics: --param ggc-min-expand=100 --param ggc-min-heapsize=131072 - COLLECT_GCC_OPTIONS='--version' '-v' '-mcpu=v7' - $PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0/../../../../sparc-rtems5/bin/as -v -s --version -o /tmp//ccFVgRAa.o /tmp//ccuAN1wc.s - GNU assembler version 2.32 (sparc-rtems5) using BFD version (GNU Binutils) 2.32 - GNU assembler (GNU Binutils) 2.32 - Copyright (C) 2019 Free Software Foundation, Inc. - This program is free software; you may redistribute it under the terms of - the GNU General Public License version 3 or later. - This program has absolutely no warranty. - This assembler was configured for a target of `sparc-rtems5'. - COMPILER_PATH=$PREFIX/bin/../libexec/gcc/sparc-rtems5/7.4.0/:$PREFIX/bin/../libexec/gcc/:$PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0/../../../../sparc-rtems5/bin/ - LIBRARY_PATH=$PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0/:$PREFIX/bin/../lib/gcc/:$PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0/../../../../sparc-rtems5/lib/ - COLLECT_GCC_OPTIONS='--version' '-v' '-mcpu=v7' - $PREFIX/bin/../libexec/gcc/sparc-rtems5/7.4.0/collect2 --version $PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0/../../../../sparc-rtems5/lib/crt0.o -L$PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0 -L$PREFIX/bin/../lib/gcc -L$PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0/../../../../sparc-rtems5/lib /tmp//ccFVgRAa.o -lgcc -lc -lgcc - collect2 version 7.4.0 20181206 (RTEMS 5, RSB 98588a55961a92f5d27bfd756dfc9e31b2b1bf98, Newlib 3e24fbf6f) - $PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0/../../../../sparc-rtems5/bin/ld --version $PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0/../../../../sparc-rtems5/lib/crt0.o -L$PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0 -L$PREFIX/bin/../lib/gcc -L$PREFIX/bin/../lib/gcc/sparc-rtems5/7.4.0/../../../../sparc-rtems5/lib /tmp//ccFVgRAa.o -lgcc -lc -lgcc - GNU ld (GNU Binutils) 2.32 - Copyright (C) 2019 Free Software Foundation, Inc. - This program is free software; you may redistribute it under the terms of - the GNU General Public License version 3 or (at your option) a later version. - This program has absolutely no warranty. - COLLECT_GCC_OPTIONS='--version' '-v' '-mcpu=v7' + +Add ``--verbose`` to the GCC command for the the verbose version details. |