1 files changed, 68 insertions, 0 deletions
diff --git a/user/start/quick.rst b/user/start/quick.rst
new file mode 100644
index 0000000..47597af
--- /dev/null
+++ b/user/start/quick.rst
@@ -0,0 +1,68 @@
+.. comment SPDX-License-Identifier: CC-BY-SA-4.0
+
+.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org>
+.. comment: All rights reserved.
+
+Quick Start Guide
+=================
+
+.. index:: Quick Start
+
+The following is a quick start guide that provides you with the basic commands
+you need to build the RTEMS Tools and Kernel.
+
+You need to have your development host set up and ready, the
+:ref:`development-host` covers what you need.
+
+This procedure does a development (unstable) build from Git for a POSIX
+host. You can refer to the specific section that cover the specific part of the
+process in detail if you have an issue. The output from the commands has been
+removed and replaced with ``...``.
+
+Create a workspace, download the RTEMS Source Builder (RSB) and build a tool
+chain (See :ref:`rtems-tools-chain`):
+
+.. code-block:: shell
+
+  $ cd
+  $ mkdir -p development/rtems
+  $ cd development/rtems
+  $ git clone git://git.rtems.org/rtems-source-builder.git rsb
+    ...
+  $ cd rsb
+  $ ./source-builder/sb-check
+    ...
+  $ cd rtems
+  $ ../source-builder/sb-set-builder \
+      --prefix=/usr/home/chris/development/rtems/4.12 4.12/rtems-sparc
+    ...
+
+Build the RTEMS Kernel (See :ref:`rtems-kernel`) by cloning the repository,
+running the ``bootstrap`` procecure, building and finally installing the
+kernel:
+
+.. code-block:: shell
+
+  $ export PATH=$HOME/development/rtems/4.12/bin:$PATH
+  $ cd
+  $ cd development/rtems
+  $ mkdir kernel
+  $ cd kernel
+  $ git clone git://git.rtems.org/rtems.git rtems
+    ...
+  $ cd rtems
+  $ ./bootstrap -c && ./bootstrap -p && \
+              $HOME/development/rtems/rsb/source-builder/sb-bootstrap
+    ...
+  $ cd ..
+  $ mkdir erc32
+  $ cd erc32
+  $ $HOME/development/rtems/kernel/rtems/configure --prefix=$HOME/development/rtems/4.12 \
+                     --target=sparc-rtems4.12 --enable-rtemsbsp=erc32 --enable-posix \
+		     --disable-networking
+    ...
+  $ make -j 8
+    ...
+  $ make install
+
+You can now build a 3rd party library like LibBSD or an application.