summaryrefslogtreecommitdiffstats
path: root/user/start/development.rst
diff options
context:
space:
mode:
Diffstat (limited to 'user/start/development.rst')
-rw-r--r--user/start/development.rst609
1 files changed, 0 insertions, 609 deletions
diff --git a/user/start/development.rst b/user/start/development.rst
deleted file mode 100644
index fd60354..0000000
--- a/user/start/development.rst
+++ /dev/null
@@ -1,609 +0,0 @@
-.. comment SPDX-License-Identifier: CC-BY-SA-4.0
-
-.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org>
-.. comment: All rights reserved.
-
-.. _development-version:
-
-Development Version
-===================
-.. index:: Git
-
-RTEMS provides open access to it's development processes. The project encouages
-all users to inspect, review, comment and contribute to the code base. The
-processes described here are the same processes the core development team use
-when developing and maintaining RTEMS.
-
-Please read :ref:`development-hosts` before continuing.
-
-.. warning::
-
- The development version is not for use in production and it can break from
- time to time.
-
-The following procedure assumes you have installed and configured your host
-operating system. It also assumes you have installed any dependent packages
-needed when building the tools and the kernel.
-
-You need to select a location to build and install the RTEMS Tool chain and
-RTEMS. Make sure there is plenty of disk space and a fast disk is
-recommended. Our procedure will document building and installing the tools in a
-home directory called :file:`development/rtems`. Using a home directory means
-you can do this without needing to be root. You can also use
-:file:`/opt/rtems/build` if you have access to that path.
-
-The location used to install the tools and kernel is called the `prefix`. It is
-best to have a `prefix` for each different version of RTEMS you are using. If
-you are using RTEMS 4.11 in production it is not a good idea to install a
-development version of 4.12 over the top. A separate `prefix` for each version
-avoids this.
-
-The RTEMS tool chain changes less often than the RTEMS kernel. One method of
-working with development releases is to have a separate `prefix` for the RTEMS
-tools and a different one for the RTEMS kernel. You can then update each
-without interacting with the other. You can also have a number of RTEMS
-versions available to test with.
-
-This procedure will build a SPARC tool chain.
-
-RTEMS Tools Chain
------------------
-
-Clone the RTEMS Source Builder (RSB) repository:
-
-.. code-block:: shell
-
- $ cd
- $ mkdir -p development/rtems
- $ cd development/rtems
- $ git clone git://git.rtems.org/rtems-source-builder.git rsb
- Cloning into 'rsb'...
- remote: Counting objects: 5837, done.
- remote: Compressing objects: 100% (2304/2304), done.
- remote: Total 5837 (delta 4014), reused 5056 (delta 3494)
- Receiving objects: 100% (5837/5837), 2.48 MiB | 292.00 KiB/s, done.
- Resolving deltas: 100% (4014/4014), done.
- Checking connectivity... done.
-
-.. sidebar:: *Downloading the source*
-
- You need an internet connection to download the source. The downloaded source
- is cached locally and the RSB checksums it. If you run a build again the
- download output will be missing. Using the RSB from git will download the
- source from the upstream project's home site and this could be `http`, `ftp`,
- or `git`.
-
-Check all the host packages you need are present. Current libraries are not
-checked and this includes checking for the python development libraries GDB
-requires:
-
-.. code-block:: shell
-
- $ cd rsb
- $ ./source-builder/sb-check
- RTEMS Source Builder - Check, 4.12 (e645642255cc)
- Environment is ok
-
-Build a tool chain for the SPARC architecure. We are using the SPARC
-architecture because GDB has a good simulator that lets us run and test the
-samples RTEMS builds by default. The current development version
-is `4.12` and is on master:
-
-.. code-block:: shell
-
- $ cd rtems
- $ ../source-builder/sb-set-builder \
- --prefix=/usr/home/chris/development/rtems/4.12 4.12/rtems-sparc
- RTEMS Source Builder - Set Builder, 4.12 (e645642255cc)
- Build Set: 4.12/rtems-sparc
- Build Set: 4.12/rtems-autotools.bset
- Build Set: 4.12/rtems-autotools-internal.bset
- config: tools/rtems-autoconf-2.69-1.cfg
- package: autoconf-2.69-x86_64-linux-gnu-1
- Creating source directory: sources
- download: ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
- downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
- building: autoconf-2.69-x86_64-linux-gnu-1
- config: tools/rtems-automake-1.12.6-1.cfg
- package: automake-1.12.6-x86_64-linux-gnu-1
- download: ftp://ftp.gnu.org/gnu/automake/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
- downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
- Creating source directory: patches
- download: https://git.rtems.org/rtems-tools/plain/tools/4.12/automake/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff
- downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%)
- building: automake-1.12.6-x86_64-linux-gnu-1
- cleaning: autoconf-2.69-x86_64-linux-gnu-1
- cleaning: automake-1.12.6-x86_64-linux-gnu-1
- Build Set: Time 0:00:17.465024
- Build Set: 4.12/rtems-autotools-base.bset
- config: tools/rtems-autoconf-2.69-1.cfg
- package: autoconf-2.69-x86_64-linux-gnu-1
- building: autoconf-2.69-x86_64-linux-gnu-1
- reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.txt
- reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.xml
- config: tools/rtems-automake-1.12.6-1.cfg
- package: automake-1.12.6-x86_64-linux-gnu-1
- building: automake-1.12.6-x86_64-linux-gnu-1
- reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.txt
- reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.xml
- installing: autoconf-2.69-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- installing: automake-1.12.6-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- cleaning: autoconf-2.69-x86_64-linux-gnu-1
- cleaning: automake-1.12.6-x86_64-linux-gnu-1
- Build Set: Time 0:00:05.358624
- Build Set: Time 0:00:22.824422
- config: devel/expat-2.1.0-1.cfg
- package: expat-2.1.0-x86_64-linux-gnu-1
- download: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
- redirect: http://internode.dl.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
- downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
- building: expat-2.1.0-x86_64-linux-gnu-1
- reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.txt
- reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.xml
- config: tools/rtems-binutils-2.26-1.cfg
- package: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
- download: ftp://ftp.gnu.org/gnu/binutils/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2
- downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%)
- download: https://git.rtems.org/rtems-tools/plain/tools/4.12/binutils/binutils-2.26-rtems-aarch64-x86_64.patch -> patches/binutils-2.26-rtems-aarch64-x86_64.patch
- downloading: patches/binutils-2.26-rtems-aarch64-x86_64.patch - 3.2kB of 3.2kB (100%)
- building: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
- reporting: tools/rtems-binutils-2.26-1.cfg -> sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1.txt
- reporting: tools/rtems-binutils-2.26-1.cfg -> sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1.xml
- config: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg
- package: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
- download: ftp://gcc.gnu.org/pub/gcc/snapshots/6-20160228/gcc-6-20160228.tar.bz2 -> sources/gcc-6-20160228.tar.bz2
- downloading: sources/gcc-6-20160228.tar.bz2 - 90.8MB of 90.8MB (100%)
- download: ftp://sourceware.org/pub/newlib/newlib-2.3.0.20160226.tar.gz -> sources/newlib-2.3.0.20160226.tar.gz
- downloading: sources/newlib-2.3.0.20160226.tar.gz - 16.9MB of 16.9MB (100%)
- download: http://www.mpfr.org/mpfr-2.4.2/mpfr-2.4.2.tar.bz2 ->
- sources/mpfr-2.4.2.tar.bz2
- downloading: sources/mpfr-2.4.2.tar.bz2 - 1.0MB of 1.0MB (100%)
- download: http://www.multiprecision.org/mpc/download/mpc-0.8.1.tar.gz -> sources/mpc-0.8.1.tar.gz
- downloading: sources/mpc-0.8.1.tar.gz - 532.2kB of 532.2kB (100%)
- download: ftp://ftp.gnu.org/gnu/gmp/gmp-4.3.2.tar.bz2 -> sources/gmp-4.3.2.tar.bz2
- downloading: sources/gmp-4.3.2.tar.bz2 - 1.8MB of 1.8MB (100%)
- building: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
- reporting: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg -> sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1.txt
- reporting: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg -> sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1.xml
- config: tools/rtems-gdb-7.9-1.cfg
- package: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
- download: http://ftp.gnu.org/gnu/gdb/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
- downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
- download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
- downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
- download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
- downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
- download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-7.9-aarch64-x86_64.patch -> patches/gdb-7.9-aarch64-x86_64.patch
- downloading: patches/gdb-7.9-aarch64-x86_64.patch - 1.7kB of 1.7kB (100%)
- building: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
- reporting: tools/rtems-gdb-7.9-1.cfg -> sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1.txt
- reporting: tools/rtems-gdb-7.9-1.cfg -> sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1.xml
- config: tools/rtems-tools-4.12-1.cfg
- package: rtems-tools-HEAD-1
- Creating source directory: sources/git
- git: clone: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
- git: reset: git://git.rtems.org/rtems-tools.git
- git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
- git: checkout: git://git.rtems.org/rtems-tools.git => HEAD
- git: pull: git://git.rtems.org/rtems-tools.git
- building: rtems-tools-HEAD-1
- reporting: tools/rtems-tools-4.12-1.cfg -> rtems-tools-HEAD-1.txt
- reporting: tools/rtems-tools-4.12-1.cfg -> rtems-tools-HEAD-1.xml
- installing: expat-2.1.0-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- installing: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- installing: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- installing: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- installing: rtems-tools-HEAD-1 -> /usr/home/chris/development/rtems/4.12
- cleaning: expat-2.1.0-x86_64-linux-gnu-1
- cleaning: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
- cleaning: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
- cleaning: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
- cleaning: rtems-tools-HEAD-1
- Build Set: Time 0:31:09.754219
-
-RTEMS Kernel
-------------
-
-We need to set our path to include the RTEMS tools we built in the previous
-section. The RTEMS tools needs to be first in your path because RTEMS provides
-specific versions of the ``autoconf`` and ``automake`` tools. We want to use
-the RTEMS version and not your host's versions:
-
-
-.. code-block:: shell
-
- $ export PATH=$HOME/development/rtems/4.12/bin:$PATH
-
-Create a new location to build the RTEMS kernel:
-
-.. code-block:: shell
-
- $ cd
- $ cd development/rtems
- $ mkdir kernel
- $ cd kernel
-
-Clone the RTEMS respository:
-
-.. code-block:: shell
-
- $ git clone git://git.rtems.org/rtems.git rtems
- Cloning into 'rtems'...
- remote: Counting objects: 483342, done.
- remote: Compressing objects: 100% (88974/88974), done.
- remote: Total 483342 (delta 390053), reused 475669 (delta 383809)
- Receiving objects: 100% (483342/483342), 69.88 MiB | 1.37 MiB/s, done.
- Resolving deltas: 100% (390053/390053), done.
- Checking connectivity... done.
-
-The developers version of the code from git requires we ``bootstrap`` the
-source code. This is an ``autoconf`` and ``automake`` bootstrap to create the
-various files generated by ``autoconf`` and ``automake``. RTEMS does not keep
-these generated files under version control. The bootstrap process is slow so
-to speed it up the RSB provides a command that can perform the bootstrap in
-parallel using your available cores. We need to enter the cloned source
-directory then run the bootsrap commands:
-
-.. code-block:: shell
-
- $ cd rtems
- $ ./bootstrap -c && ./bootstrap -p && \
- $HOME/development/rtems/rsb/source-builder/sb-bootstrap
- removing automake generated Makefile.in files
- removing configure files
- removing aclocal.m4 files
- Generating ./cpukit/dtc/libfdt/preinstall.am
- Generating ./cpukit/zlib/preinstall.am
- Generating ./cpukit/libdl/preinstall.am
- Generating ./cpukit/posix/preinstall.am
- Generating ./cpukit/pppd/preinstall.am
- Generating ./cpukit/librpc/preinstall.am
- Generating ./cpukit/preinstall.am
- Generating ./cpukit/sapi/preinstall.am
- Generating ./cpukit/score/preinstall.am
- Generating ./cpukit/score/cpu/mips/preinstall.am
- Generating ./cpukit/score/cpu/sh/preinstall.am
- Generating ./cpukit/score/cpu/sparc/preinstall.am
- Generating ./cpukit/score/cpu/no_cpu/preinstall.am
- Generating ./cpukit/score/cpu/arm/preinstall.am
- Generating ./cpukit/score/cpu/m32c/preinstall.am
- Generating ./cpukit/score/cpu/moxie/preinstall.am
- Generating ./cpukit/score/cpu/v850/preinstall.am
- Generating ./cpukit/score/cpu/sparc64/preinstall.am
- Generating ./cpukit/score/cpu/or1k/preinstall.am
- Generating ./cpukit/score/cpu/i386/preinstall.am
- Generating ./cpukit/score/cpu/nios2/preinstall.am
- Generating ./cpukit/score/cpu/epiphany/preinstall.am
- Generating ./cpukit/score/cpu/m68k/preinstall.am
- Generating ./cpukit/score/cpu/lm32/preinstall.am
- Generating ./cpukit/score/cpu/powerpc/preinstall.am
- Generating ./cpukit/score/cpu/bfin/preinstall.am
- Generating ./cpukit/libpci/preinstall.am
- Generating ./cpukit/libcrypt/preinstall.am
- Generating ./cpukit/rtems/preinstall.am
- Generating ./cpukit/telnetd/preinstall.am
- Generating ./cpukit/libnetworking/preinstall.a
- ......
- Generating ./c/src/lib/libbsp/powerpc/gen5200/preinstall.am
- Generating ./c/src/lib/libbsp/powerpc/mpc55xxevb/preinstall.am
- Generating ./c/src/lib/libbsp/bfin/TLL6527M/preinstall.am
- Generating ./c/src/lib/libbsp/bfin/bf537Stamp/preinstall.am
- Generating ./c/src/lib/libbsp/bfin/eZKit533/preinstall.am
- Generating ./c/src/librtems++/preinstall.am
- Generating ./c/src/libchip/preinstall.am
- Generating ./c/src/wrapup/preinstall.am
- Generating ./c/src/ada/preinstall.am
- RTEMS Source Builder - RTEMS Bootstrap, 4.12 (e645642255cc modified)
- 1/139: autoreconf: configure.ac
- 2/139: autoreconf: cpukit/configure.ac
- 3/139: autoreconf: tools/cpu/configure.ac
- 4/139: autoreconf: tools/cpu/generic/configure.ac
- 5/139: autoreconf: tools/cpu/sh/configure.ac
- 6/139: autoreconf: tools/cpu/nios2/configure.ac
- 7/139: autoreconf: tools/build/configure.ac
- 8/139: autoreconf: doc/configure.ac
- ......
- 124/139: autoreconf: c/src/make/configure.ac
- 125/139: autoreconf: c/src/librtems++/configure.ac
- 126/139: autoreconf: c/src/ada-tests/configure.ac
- 127/139: autoreconf: testsuites/configure.ac
- 128/139: autoreconf: testsuites/libtests/configure.ac
- 129/139: autoreconf: testsuites/mptests/configure.ac
- 130/139: autoreconf: testsuites/fstests/configure.ac
- 131/139: autoreconf: testsuites/sptests/configure.ac
- 132/139: autoreconf: testsuites/tmtests/configure.ac
- 133/139: autoreconf: testsuites/smptests/configure.ac
- 134/139: autoreconf: testsuites/tools/configure.ac
- 135/139: autoreconf: testsuites/tools/generic/configure.ac
- 136/139: autoreconf: testsuites/psxtests/configure.ac
- 137/139: autoreconf: testsuites/psxtmtests/configure.ac
- 138/139: autoreconf: testsuites/rhealstone/configure.ac
- 139/139: autoreconf: testsuites/samples/configure.ac
- Bootstrap time: 0:02:47.398824
-
-We build RTEMS in a directory outside of the source tree we have just cloned
-and ``bootstrapped``. You cannot build RTEMS while in the source tree. Lets
-create a suitable directory using the name of the BSP we are going to build:
-
-.. code-block:: shell
-
- $ cd ..
- $ mkdir erc32
- $ cd erc32
-
-Configure RTEMS using the ``configure`` command. We use a full path to
-``configure`` so the object files built contain the absolute path of the source
-files. If you are source level debugging you will be able to access the source
-code to RTEMS from the debugger. We will build for the ``erc32`` BSP with POSIX
-enabled and the networking stack disabled:
-
-.. code-block:: shell
-
- $ $HOME/development/rtems/kernel/rtems/configure --prefix=$HOME/development/rtems/4.12 \
- --target=sparc-rtems4.12 --enable-rtemsbsp=erc32 --enable-posix \
- --disable-networking
- checking for gmake... no
- checking for make... make
- checking for RTEMS Version... 4.11.99.0
- checking build system type... x86_64-pc-linux-gnu
- checking host system type... x86_64-pc-linux-gnu
- checking target system type... sparc-unknown-rtems4.12
- checking for a BSD-compatible install... /usr/bin/install -c
- checking whether build environment is sane... yes
- checking for a thread-safe mkdir -p... /bin/mkdir -p
- checking for gawk... no
- checking for mawk... mawk
- checking whether make sets $(MAKE)... yes
- checking whether to enable maintainer-specific portions of Makefiles... no
- checking that generated files are newer than configure... done
- ......
- checking target system type... sparc-unknown-rtems4.12
- checking rtems target cpu... sparc
- checking for a BSD-compatible install... /usr/bin/install -c
- checking whether build environment is sane... yes
- checking for sparc-rtems4.12-strip... sparc-rtems4.12-strip
- checking for a thread-safe mkdir -p... /bin/mkdir -p
- checking for gawk... no
- checking for mawk... mawk
- checking whether make sets $(MAKE)... yes
- checking whether to enable maintainer-specific portions of Makefiles... no
- checking that generated files are newer than configure... done
- configure: creating ./config.status
- config.status: creating Makefile
-
- target architecture: sparc.
- available BSPs: erc32.
- 'make all' will build the following BSPs: erc32.
- other BSPs can be built with 'make RTEMS_BSP="bsp1 bsp2 ..."'
-
- config.status: creating Makefile
-
-Build RTEMS using two cores:
-
-.. code-block:: shell
-
- $ make -j 2
- Making all in tools/build
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- make all-am
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT cklength.o -MD -MP -MF .deps/cklength.Tpo -c -o cklength.o /home/chris/development/rtems/kernel/rtems/tools/build/cklength.c
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT eolstrip.o -MD -MP -MF .deps/eolstrip.Tpo -c -o eolstrip.o /home/chris/development/rtems/kernel/rtems/tools/build/eolstrip.c
- mv -f .deps/cklength.Tpo .deps/cklength.Po
- mv -f .deps/eolstrip.Tpo .deps/eolstrip.Po
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT compat.o -MD -MP -MF .deps/compat.Tpo -c -o compat.o /home/chris/development/rtems/kernel/rtems/tools/build/compat.c
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT packhex.o -MD -MP -MF .deps/packhex.Tpo -c -o packhex.o /home/chris/development/rtems/kernel/rtems/tools/build/packhex.c
- mv -f .deps/compat.Tpo .deps/compat.Po
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT unhex.o -MD -MP -MF .deps/unhex.Tpo -c -o unhex.o /home/chris/development/rtems/kernel/rtems/tools/build/unhex.c
- mv -f .deps/packhex.Tpo .deps/packhex.Po
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT rtems-bin2c.o -MD -MP -MF .deps/rtems-bin2c.Tpo -c -o rtems-bin2c.o /home/chris/development/rtems/kernel/rtems/tools/build/rtems-bin2c.c
- mv -f .deps/unhex.Tpo .deps/unhex.Po
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT binpatch.o -MD -MP -MF .deps/binpatch.Tpo -c -o binpatch.o /home/chris/development/rtems/kernel/rtems/tools/build/binpatch.c
- mv -f .deps/rtems-bin2c.Tpo .deps/rtems-bin2c.Po
- gcc -g -O2 -o cklength cklength.o
- mv -f .deps/binpatch.Tpo .deps/binpatch.Po
- gcc -g -O2 -o eolstrip eolstrip.o compat.o
- gcc -g -O2 -o packhex packhex.o
- gcc -g -O2 -o rtems-bin2c rtems-bin2c.o compat.o
- gcc -g -O2 -o unhex unhex.o compat.o
- gcc -g -O2 -o binpatch binpatch.o
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- Making all in tools/cpu
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- Making all in generic
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[2]: Nothing to be done for 'all'.
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[2]: Nothing to be done for 'all-am'.
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- Making all in testsuites/tools
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
- Making all in generic
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools/generic'
- make[2]: Nothing to be done for 'all'.
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools/generic'
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
- make[2]: Nothing to be done for 'all-am'.
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
- Making all in sparc-rtems4.12/c
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
- Making all in .
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
- Configuring RTEMS_BSP=erc32
- checking for gmake... no
- checking for make... make
- checking build system type... x86_64-pc-linux-gnu
- checking host system type... sparc-unknown-rtems4.12
- ......
- sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs -I.. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/../support/include -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT init.o -MD -MP -MF .deps/init.Tpo -c -o init.o /home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs/init.c
- sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs -I.. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/../support/include -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT empty.o -MD -MP -MF .deps/empty.Tpo -c -o empty.o /home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs/empty.c
- mv -f .deps/empty.Tpo .deps/empty.Po
- mv -f .deps/init.Tpo .deps/init.Po
- sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -Wl,--gc-sections -mcpu=cypress -o nsecs.exe init.o empty.o
- sparc-rtems4.12-nm -g -n nsecs.exe > nsecs.num
- sparc-rtems4.12-size nsecs.exe
- text data bss dec hex filename
- 121392 1888 6624 129904 1fb70 nsecs.exe
- cp nsecs.exe nsecs.ralf
- make[6]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites/samples/nsecs'
- make[5]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites/samples'
- make[4]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites/samples'
- make[4]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites'
- make[4]: Nothing to be done for 'all-am'.
- make[4]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites'
- make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32/testsuites'
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/ c/erc32'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32'
- make[1]: Nothing to be done for 'all-am'.
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32'
-
-All that remains to be done is to install the kernel. Installing RTEMS copies
-the API headers and architecture specific libraries to a locaiton under the
-`prefix` you provide. You can install any number of BSPs under the same
-`prefix`. We recommend you have a separate `prefix` for different versions of
-RTEMS. Do not mix versions of RTEMS under the same `prefix`. Make installs
-RTEMS with the following command:
-
-.. code-block:: shell
-
- $ make install
- Making install in tools/build
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- /bin/mkdir -p '/home/chris/development/rtems/4.12/bin'
- /usr/bin/install -c cklength eolstrip packhex unhex rtems-bin2c '/home/chris/development/rtems/4.12/bin'
- /bin/mkdir -p '/home/chris/development/rtems/4.12/bin'
- /usr/bin/install -c install-if-change '/home/chris/development/rtems/4.12/bin'
- make[2]: Nothing to be done for 'install-data-am'.
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- Making install in tools/cpu
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- Making install in generic
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[3]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[3]: Nothing to be done for 'install-exec-am'.
- make[3]: Nothing to be done for 'install-data-am'.
- make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[3]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[3]: Nothing to be done for 'install-exec-am'.
- make[3]: Nothing to be done for 'install-data-am'.
- make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu
- ......
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32'
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32'
- make[2]: Nothing to be done for 'install-exec-am'.
- /bin/mkdir -p '/home/chris/development/rtems/4.12/make'
- /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/main.cfg /home/chris/development/rtems/kernel/rtems/make/leaf.cfg '/home/chris/development/rtems/4.12/make'
- /bin/mkdir -p '/home/chris/development/rtems/4.12/share/rtems4.12/make/Templates'
- /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.dir /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.leaf /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.lib '/home/chris/development/rtems/4.12/share/rtems4.12/make/Templates'
- /bin/mkdir -p '/home/chris/development/rtems/4.12/make/custom'
- /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/custom/default.cfg '/home/chris/development/rtems/4.12/make/custom'
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32'
-
-Contributing Patches
---------------------
-
-RTEMS welcomes fixes to bugs and new features. The RTEMS Project likes to have
-bugs fixed against a ticket created on our :r:url:`devel`. Please raise a
-ticket if you have a bug. Any changes that are made can be tracked against the
-ticket. If you want to add a new a feature please post a message to
-:r:list:`devel` describing what you would like to implement. The RTEMS
-maintainer will help decide if the feature is in the best interest of the
-project. Not everything is and the maintainers need to evalulate how much
-effort it is to maintain the feature. Once accepted into the source tree it
-becomes the responsibility of the maintainers to keep the feature updated and
-working.
-
-Changes to the source tree are tracked using git. If you have not made changes
-and enter the source tree and enter a git status command you will see nothing
-has changed:
-
-.. code-block:: shell
-
- $ cd ../rtems
- $ git status
- On branch master
- Your branch is up-to-date with 'origin/master'.
- nothing to commit, working directory clean
-
-We will make a change to the source code. In this example I change the help
-message to the RTEMS shell's ``halt`` command. Running the same git status
-command reports:
-
-.. code-block:: shell
-
- $ git status
- On branch master
- Your branch is up-to-date with 'origin/master'.
- Changes not staged for commit:
- (use "git add <file>..." to update what will be committed)
- (use "git checkout -- <file>..." to discard changes in working directory)
-
- modified: cpukit/libmisc/shell/main_halt.c
-
- no changes added to commit (use "git add" and/or "git commit -a")
-
-As an example I have a ticket open and the ticket number is 9876. I commit the
-change with the follow git command:
-
-.. code-block:: shell
-
- $ git commit cpukit/libmisc/shell/main_halt.c
-
-An editor is opened and I enter my commit message. The first line is a title
-and the following lines form a body. My message is:
-
-.. code-block:: shell
-
- shell: Add more help detail to the halt command.
-
- Closes #9876.
-
- # Please enter the commit message for your changes. Lines starting
- # with '#' will be ignored, and an empty message aborts the commit.
- # Explicit paths specified without -i or -o; assuming --only paths...
- #
- # Committer: Chris Johns <chrisj@rtems.org>
- #
- # On branch master
- # Your branch is up-to-date with 'origin/master'.
- #
- # Changes to be committed:
- # modified: cpukit/libmisc/shell/main_halt.c
-
-When you save and exit the editor git will report the commit's status:
-
-.. code-block:: shell
-
- $ git commit cpukit/libmisc/shell/main_halt.c
- [master 9f44dc9] shell: Add more help detail to the halt command.
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-You can either email the patch to :r:list:`devel` with the following git
-command, and it is `minus one` on the command line:
-
-.. code-block:: shell
-
- $ git send-email --to=devel@rtems.org -1
- <add output here>
-
-Or you can ask git to create a patch file using:
-
-.. code-block:: shell
-
- $ git format-patch -1
- 0001-shell-Add-more-help-detail-to-the-halt-command.patch
-
-This patch can be attached to a ticket.