diff options
Diffstat (limited to '')
| -rw-r--r-- | user/start/bsp-build.rst | 21 |
1 files changed, 7 insertions, 14 deletions
diff --git a/user/start/bsp-build.rst b/user/start/bsp-build.rst index 8401d71..962cd43 100644 --- a/user/start/bsp-build.rst +++ b/user/start/bsp-build.rst @@ -1,6 +1,6 @@ .. SPDX-License-Identifier: CC-BY-SA-4.0 -.. Copyright (C) 2019 embedded brains GmbH +.. Copyright (C) 2019 embedded brains GmbH & Co. KG .. Copyright (C) 2019 Sebastian Huber .. _QuickStartBSPBuild: @@ -45,7 +45,7 @@ To build the BSP with all the tests run this command: cd $HOME/quick-start/src/rsb/rtems ../source-builder/sb-set-builder --prefix=$HOME/quick-start/rtems/5 \ - --target=sparc-rtems@rtems-ver-major@ --with-rtems-bsp=erc32 --with-rtems-tests=yes @rtems-ver-major@/rtems-kernel + --target=sparc-rtems@rtems-ver-major@ --with-rtems-bsp=sparc/erc32 --with-rtems-tests=yes @rtems-ver-major@/rtems-kernel This command should output something like: @@ -99,16 +99,9 @@ If you have built a BSP with the RSB, you can move on to Manual BSP Build ---------------- -We manually build the BSP in four steps. The first step is to create a build -directory. It must be separate from the RTEMS source directory. We use -:file:`$HOME/quick-start/build/b-erc32`. - -.. code-block:: none - - mkdir -p $HOME/quick-start/build/b-erc32 - -The second step is to set your path. Prepend the RTEMS tool suite binary -directory to your ``$PATH`` throughout the remaining steps. Run the command: +We manually build the BSP in four steps. The first step is to set your path. +Prepend the RTEMS tool suite binary directory to your ``$PATH`` throughout the +remaining steps. Run the command: .. code-block:: none @@ -133,7 +126,7 @@ has not been correctly set. Check the contents of the path file cannot be found return to :ref:`QuickStartTools` and install the tools again. -The first step is to configure the BSP. There are various BSP build +The second step is to configure the BSP. There are various BSP build configuration options available. Some options are BSP-specific. Each section in the INI-style configuration file ``config.ini`` instructs the build system to build a particular BSP variant (`sparc/erc32` in our case). We enable the build @@ -179,7 +172,7 @@ by ``$BASE``. Checking for program 'xz' : $BASE/anaconda3/bin/xz 'configure' finished successfully (0.414s) -Building the BSP is the second step. +Building the BSP is the third step. .. code-block:: none |