diff options
Diffstat (limited to 'user/installation')
| -rw-r--r-- | user/installation/developer.rst | 287 | ||||
| -rw-r--r-- | user/installation/kernel.rst | 308 | ||||
| -rw-r--r-- | user/installation/project-sandboxing.rst | 42 | ||||
| -rw-r--r-- | user/installation/releases.rst | 193 |
4 files changed, 214 insertions, 616 deletions
diff --git a/user/installation/developer.rst b/user/installation/developer.rst index 1b2b785..8acd68c 100644 --- a/user/installation/developer.rst +++ b/user/installation/developer.rst @@ -34,8 +34,8 @@ you can do this without needing to be root. You can also use The location used to install the tools and kernel is called the `prefix`. It is best to have a `prefix` for each different version of RTEMS you are using. If -you are using RTEMS 4.11 in production it is not a good idea to install a -development version of 5 over the top. A separate `prefix` for each version +you are using RTEMS 5 in production it is not a good idea to install a +development version of 6 over the top. A separate `prefix` for each version avoids this. The RTEMS tool chain changes less often than the RTEMS kernel. One method of @@ -84,7 +84,7 @@ requires: $ cd rsb $ ./source-builder/sb-check - RTEMS Source Builder - Check, 5 (089327b5dcf9) + RTEMS Source Builder - Check, @rtems-ver-major@ (089327b5dcf9) Environment is ok If you are unsure how to specify the build set for the architecture you wish to @@ -93,58 +93,102 @@ build, just ask the tool: .. code-block:: none $ ../source-builder/sb-set-builder --list-bsets <1> - RTEMS Source Builder - Set Builder, v4.11.0 + RTEMS Source Builder - Set Builder, 6 (7d80719f7472) Examining: config - Examining: ../source-builder/config <2> - 4.10/rtems-all.bset <3> - 4.10/rtems-arm.bset <4> - 4.10/rtems-autotools.bset - 4.10/rtems-avr.bset - 4.10/rtems-bfin.bset - 4.10/rtems-h8300.bset - 4.10/rtems-i386.bset - 4.10/rtems-lm32.bset - 4.10/rtems-m32c.bset - 4.10/rtems-m32r.bset - 4.10/rtems-m68k.bset - 4.10/rtems-mips.bset - 4.10/rtems-nios2.bset - 4.10/rtems-powerpc.bset - 4.10/rtems-sh.bset - 4.10/rtems-sparc.bset - 4.11/rtems-all.bset - 4.11/rtems-arm.bset - 4.11/rtems-autotools.bset - 4.11/rtems-avr.bset - 4.11/rtems-bfin.bset - 4.11/rtems-h8300.bset - 4.11/rtems-i386.bset - 4.11/rtems-lm32.bset - 4.11/rtems-m32c.bset - 4.11/rtems-m32r.bset - 4.11/rtems-m68k.bset - 4.11/rtems-microblaze.bset - 4.11/rtems-mips.bset - 4.11/rtems-moxie.bset - 4.11/rtems-nios2.bset - 4.11/rtems-powerpc.bset - 4.11/rtems-sh.bset - 4.11/rtems-sparc.bset - 4.11/rtems-sparc64.bset - 4.11/rtems-v850.bset - 4.9/rtems-all.bset - 4.9/rtems-arm.bset - 4.9/rtems-autotools.bset - 4.9/rtems-i386.bset - 4.9/rtems-m68k.bset - 4.9/rtems-mips.bset - 4.9/rtems-powerpc.bset - 4.9/rtems-sparc.bset + Examining: ../source-builder/config <2> + Examining: ../bare/config + 6/rtems-aarch64.bset + 6/rtems-all.bset <3> + 6/rtems-arm.bset <4> + 6/rtems-base.bset + 6/rtems-bfin.bset + 6/rtems-default.bset + 6/rtems-i386.bset + 6/rtems-kernel.bset + 6/rtems-libbsd.bset + 6/rtems-llvm.bset + 6/rtems-lm32.bset + 6/rtems-m68k.bset + 6/rtems-microblaze.bset + 6/rtems-mips.bset + 6/rtems-moxie.bset + 6/rtems-net-legacy.bset + 6/rtems-nios2.bset + 6/rtems-or1k.bset + 6/rtems-packages.bset + 6/rtems-powerpc.bset + 6/rtems-riscv.bset + 6/rtems-sh.bset + 6/rtems-sparc.bset + 6/rtems-sparc64.bset + 6/rtems-tools.bset + 6/rtems-v850.bset + 6/rtems-x86_64.bset + 7/rtems-aarch64.bset + 7/rtems-all.bset + 7/rtems-arm.bset + 7/rtems-base.bset + 7/rtems-bfin.bset + 7/rtems-default.bset + 7/rtems-i386.bset + 7/rtems-lm32.bset + 7/rtems-m68k.bset + 7/rtems-microblaze.bset + 7/rtems-mips.bset + 7/rtems-moxie.bset + 7/rtems-nios2.bset + 7/rtems-or1k.bset + 7/rtems-powerpc.bset + 7/rtems-riscv.bset + 7/rtems-sh.bset + 7/rtems-sparc.bset + 7/rtems-sparc64.bset + 7/rtems-v850.bset + 7/rtems-x86_64.bset + bsps/atsamv.bset + bsps/beagleboneblack.bset + bsps/erc32.bset + bsps/gr712rc.bset + bsps/gr740.bset + bsps/imx7.bset + bsps/pc.bset + bsps/qoriq_e500.bset + bsps/qoriq_e6500_32.bset + bsps/qoriq_e6500_64.bset + bsps/raspberrypi2.bset + bsps/xilinx_zynq_zc702.bset + bsps/xilinx_zynq_zc706.bset + bsps/xilinx_zynq_zedboard.bset + databases/sqlite.bset + devel/autotools-base.bset + devel/autotools-internal.bset + devel/autotools.bset + devel/capstone.bset + devel/dtc.bset + devel/libtool.bset + devel/libusb.bset + devel/or1ksim.bset + devel/qemu-couverture.bset + devel/qemu-xilinx.bset + devel/qemu.bset + devel/sis.bset + devel/spike.bset + devel/swig.bset + ftp/curl.bset gnu-tools-4.6.bset - rtems-4.10-base.bset <5> - rtems-4.11-base.bset - rtems-4.9-base.bset - rtems-base.bset <5> + gnu-tools-4.8.2.bset + graphics/freetype2.bset + graphics/graphics-all.bset + graphics/libjpeg.bset + graphics/libpng.bset + graphics/libtiff.bset + graphics/microwindows.bset + graphics/nxlib.bset + graphics/t1lib.bset + lang/gcc491.bset + net-mgmt/net-snmp.bset + net/lwip.bset + net/ntp.bset .. topic:: Items: @@ -152,142 +196,15 @@ build, just ask the tool: 2. The paths inspected. See :ref:`Configuration`. - 3. A build set to build all RTEMS 4.10 supported architectures. + 3. A build set to build all RTEMS @rtems-ver-major@ supported architectures. - 4. The build set for the ARM architecture on RTEMS 4.10. - - 5. Support build set file with common functionality included by other build - set files. + 4. The build set for the ARM architecture on RTEMS @rtems-ver-major@. Build a tool chain for the SPARC architecture. We are using the SPARC -architecture because GDB has a good simulator that lets us run and test the -samples RTEMS builds by default. The current development version -is `5` and is on master: - -.. code-block:: none +architecture because GDB has a good simulator that lets us run and +test the samples RTEMS builds by default. The development version is +one more than ``@rtems-ver-major@` and is on the ``master`` branch: - $ cd rtems - $ ../source-builder/sb-set-builder --prefix=/usr/home/chris/development/rtems/5 5/rtems-sparc - RTEMS Source Builder - Set Builder, 5 (089327b5dcf9) - Build Set: 5/rtems-sparc - Build Set: 5/rtems-autotools.bset - Build Set: 5/rtems-autotools-internal.bset - config: tools/rtems-autoconf-2.69-1.cfg - package: autoconf-2.69-x86_64-linux-gnu-1 - Creating source directory: sources - download: ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz - downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%) - building: autoconf-2.69-x86_64-linux-gnu-1 - config: tools/rtems-automake-1.12.6-1.cfg - package: automake-1.12.6-x86_64-linux-gnu-1 - download: ftp://ftp.gnu.org/gnu/automake/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz - downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%) - Creating source directory: patches - download: https://git.rtems.org/rtems-tools/plain/tools/5/automake/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%) - building: automake-1.12.6-x86_64-linux-gnu-1 - cleaning: autoconf-2.69-x86_64-linux-gnu-1 - cleaning: automake-1.12.6-x86_64-linux-gnu-1 - Build Set: Time 0:00:12.713221 - Build Set: 5/rtems-autotools-base.bset - config: tools/rtems-autoconf-2.69-1.cfg - package: autoconf-2.69-x86_64-linux-gnu-1 - building: autoconf-2.69-x86_64-linux-gnu-1 - reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.txt - reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.xml - config: tools/rtems-automake-1.12.6-1.cfg - package: automake-1.12.6-x86_64-linux-gnu-1 - building: automake-1.12.6-x86_64-linux-gnu-1 - reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.txt - reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.xml - installing: autoconf-2.69-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/5 - installing: automake-1.12.6-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/5 - cleaning: autoconf-2.69-x86_64-linux-gnu-1 - cleaning: automake-1.12.6-x86_64-linux-gnu-1 - Build Set: Time 0:00:09.105363 - Build Set: Time 0:00:21.822083 - config: devel/expat-2.1.0-1.cfg - package: expat-2.1.0-x86_64-linux-gnu-1 - download: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz - redirect: https://vorboss.dl.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz - downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%) - building: expat-2.1.0-x86_64-linux-gnu-1 - reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.txt - reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.xml - config: tools/rtems-binutils-2.29-1.cfg - package: sparc-rtems5-binutils-2.29-x86_64-linux-gnu-1 - download: ftp://ftp.gnu.org/gnu/binutils/binutils-2.29.tar.bz2 -> sources/binutils-2.29.tar.bz2 - downloading: sources/binutils-2.29.tar.bz2 - 27.7MB of 27.7MB (100%) - download: https://devel.rtems.org/raw-attachment/ticket/3091/0001-Fix-Binutils-2.29-PR21884.patch -> patches/0001-Fix-Binutils-2.29-PR21884.patch - downloading: patches/0001-Fix-Binutils-2.29-PR21884.patch - 8.8kB of 8.8kB (100%) - building: sparc-rtems5-binutils-2.29-x86_64-linux-gnu-1 - reporting: tools/rtems-binutils-2.29-1.cfg -> sparc-rtems5-binutils-2.29-x86_64-linux-gnu-1.txt - reporting: tools/rtems-binutils-2.29-1.cfg -> sparc-rtems5-binutils-2.29-x86_64-linux-gnu-1.xml - config: tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg - package: sparc-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-linux-gnu-1 - download: https://ftp.gnu.org/gnu/gcc/gcc-7.2.0/gcc-7.2.0.tar.xz -> sources/gcc-7.2.0.tar.xz - downloading: sources/gcc-7.2.0.tar.xz - 59.4MB of 59.4MB (100%) - download: https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff_plain;h=62ffbcb7502f0ff88ff7566cd6d7c59c0483ecc0 -> patches/gcc-62ffbcb7502f0ff88ff7566cd6d7c59c0483ecc0.patch - downloading: patches/gcc-62ffbcb7502f0ff88ff7566cd6d7c59c0483ecc0.patch - 1.8kB - download: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/config.gcc;h=593631849bb5e0df5cc4ff42c1a1cc34b7eec2f8;hp=a9196cd26d9ec24c2e3f6026f63348cae3734861;hb=e840389000b8339a63bee56d8b3...<see log> -> patches/gcc-593631849bb5e0df5cc4ff42c1a1cc34b7eec2f8.patch - downloading: patches/gcc-593631849bb5e0df5cc4ff42c1a1cc34b7eec2f8.patch - 806.0 bytes - download: https://gcc.gnu.org/git/?p=gcc.git;a=blobdiff_plain;f=gcc/config/rs6000/rtems.h;h=7ea9ebdb77b6a9b7060ad2362318e0e12b9058ae;hp=8a62fdcbaf321d616021c4c396619b7f56cf5ed2;hb=e840389000b8339a...<see log> -> patches/gcc-7ea9ebdb77b6a9b7060ad2362318e0e12b9058ae.patch - downloading: patches/gcc-7ea9ebdb77b6a9b7060ad2362318e0e12b9058ae.patch - 3.2kB - download: ftp://sourceware.org/pub/newlib/newlib-2.5.0.20170922.tar.gz -> sources/newlib-2.5.0.20170922.tar.gz - downloading: sources/newlib-2.5.0.20170922.tar.gz - 17.3MB of 17.3MB (100%) - download: https://devel.rtems.org/raw-attachment/ticket/2514/0001-RTEMS-Self-contained-POSIX-objects.patch -> patches/0001-RTEMS-Self-contained-POSIX-objects.patch - downloading: patches/0001-RTEMS-Self-contained-POSIX-objects.patch - 5.7kB of 5.7kB (100%) - download: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=patch;h=c165a27c0147471977377acd8918ab3b446f947a -> patches/newlib-cygwin-git-c165a27c0147471977377acd8918ab3b446f947a.patch - downloading: patches/newlib-cygwin-git-c165a27c0147471977377acd8918ab3b446f947a.patch - 986.0 bytes - download: https://sourceware.org/git/gitweb.cgi?p=newlib-cygwin.git;a=patch;h=ce189d8afef720b0977b5cae7f9eabf5d49b530c -> patches/newlib-cygwin-git-ce189d8afef720b0977b5cae7f9eabf5d49b530c.patch - downloading: patches/newlib-cygwin-git-ce189d8afef720b0977b5cae7f9eabf5d49b530c.patch - 3.4kB - download: https://ftp.gnu.org/gnu/mpfr/mpfr-3.1.4.tar.bz2 -> sources/mpfr-3.1.4.tar.bz2 - downloading: sources/mpfr-3.1.4.tar.bz2 - 1.2MB of 1.2MB (100%) - download: https://ftp.gnu.org/gnu/mpc/mpc-1.0.3.tar.gz -> sources/mpc-1.0.3.tar.gz - downloading: sources/mpc-1.0.3.tar.gz - 654.2kB of 654.2kB (100%) - download: https://ftp.gnu.org/gnu/gmp/gmp-6.1.0.tar.bz2 -> sources/gmp-6.1.0.tar.bz2 - downloading: sources/gmp-6.1.0.tar.bz2 - 2.3MB of 2.3MB (100%) - building: sparc-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-linux-gnu-1 - reporting: tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg -> sparc-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-linux-gnu-1.txt - reporting: tools/rtems-gcc-7.2.0-newlib-2.5.0.20170922-1.cfg -> sparc-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-linux-gnu-1.xml - config: tools/rtems-gdb-8.0.1-1.cfg - package: sparc-rtems5-gdb-8.0.1-x86_64-linux-gnu-1 - download: http://ftp.gnu.org/gnu/gdb/gdb-8.0.1.tar.xz -> sources/gdb-8.0.1.tar.xz - downloading: sources/gdb-8.0.1.tar.xz - 18.7MB of 18.7MB (100%) - download: https://gaisler.org/gdb/gdb-8.0.1-sis-leon2-leon3.diff -> patches/gdb-8.0.1-sis-leon2-leon3.diff - downloading: patches/gdb-8.0.1-sis-leon2-leon3.diff - 224.5kB of 224.5kB (100%) - building: sparc-rtems5-gdb-8.0.1-x86_64-linux-gnu-1 - reporting: tools/rtems-gdb-8.0.1-1.cfg -> sparc-rtems5-gdb-8.0.1-x86_64-linux-gnu-1.txt - reporting: tools/rtems-gdb-8.0.1-1.cfg -> sparc-rtems5-gdb-8.0.1-x86_64-linux-gnu-1.xml - config: tools/rtems-tools-5-1.cfg - package: rtems-tools-HEAD-1 - Creating source directory: sources/git - git: clone: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git - git: reset: git://git.rtems.org/rtems-tools.git - git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git - git: checkout: git://git.rtems.org/rtems-tools.git => HEAD - git: pull: git://git.rtems.org/rtems-tools.git - building: rtems-tools-HEAD-1 - reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-HEAD-1.txt - reporting: tools/rtems-tools-5-1.cfg -> rtems-tools-HEAD-1.xml - config: tools/rtems-kernel-5.cfg - package: sparc-rtems5-kernel-5-1 - building: sparc-rtems5-kernel-5-1 - reporting: tools/rtems-kernel-5.cfg -> sparc-rtems5-kernel-5-1.txt - reporting: tools/rtems-kernel-5.cfg -> sparc-rtems5-kernel-5-1.xml - installing: expat-2.1.0-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/5 - installing: sparc-rtems5-binutils-2.29-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/5 - installing: sparc-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/5 - installing: sparc-rtems5-gdb-8.0.1-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/5 - installing: rtems-tools-HEAD-1 -> /usr/home/chris/development/rtems/5 - installing: sparc-rtems5-kernel-5-1 -> /usr/home/chris/development/rtems/5 - cleaning: expat-2.1.0-x86_64-linux-gnu-1 - cleaning: sparc-rtems5-binutils-2.29-x86_64-linux-gnu-1 - cleaning: sparc-rtems5-gcc-7.2.0-newlib-2.5.0.20170922-x86_64-linux-gnu-1 - cleaning: sparc-rtems5-gdb-8.0.1-x86_64-linux-gnu-1 - cleaning: rtems-tools-HEAD-1 - cleaning: sparc-rtems5-kernel-5-1 - Build Set: Time 0:39:33.988995 .. _windows-tool-chain: Windows Host Tool Chain diff --git a/user/installation/kernel.rst b/user/installation/kernel.rst index fca4ed7..d61f17f 100644 --- a/user/installation/kernel.rst +++ b/user/installation/kernel.rst @@ -18,10 +18,9 @@ Create a new location to build the RTEMS kernel: .. code-block:: none - $ cd - $ cd development/rtems - $ mkdir kernel - $ cd kernel + $ cd $HOME/development/rtems + $ mkdir src + $ cd src Clone the RTEMS respository: @@ -36,209 +35,72 @@ Clone the RTEMS respository: Resolving deltas: 100% (390053/390053), done. Checking connectivity... done. -Tools Path Set Up ------------------ - -We need to set our path to include the RTEMS tools we built in the previous -section. The RTEMS tools needs to be first in your path because RTEMS provides -specific versions of the ``autoconf`` and ``automake`` tools. We want to use -the RTEMS version and not your host's versions: - -.. code-block:: none - - $ export PATH=$HOME/development/rtems/5/bin:$PATH - -.. _bootstrapping: - -Bootstrapping -------------- - -The developers version of the code from git requires we ``bootstrap`` the -source code. This is an ``autoconf`` and ``automake`` bootstrap to create the -various files generated by ``autoconf`` and ``automake``. RTEMS does not keep -these generated files under version control. The bootstrap process is slow so -to speed it up we provide a command that can perform the bootstrap in -parallel using your available cores. We need to enter the cloned source -directory then run the bootstrap commands: - -.. code-block:: none - - $ cd rtems - $ ./bootstrap -c && ./rtems-bootstrap - removing automake generated Makefile.in files - removing configure files - removing aclocal.m4 files - RTEMS Bootstrap, 5 (089327b5dcf9) - 1/139: autoreconf: configure.ac - 2/139: autoreconf: cpukit/configure.ac - 3/139: autoreconf: tools/cpu/configure.ac - 4/139: autoreconf: tools/cpu/generic/configure.ac - 5/139: autoreconf: tools/cpu/sh/configure.ac - 6/139: autoreconf: tools/cpu/nios2/configure.ac - 7/139: autoreconf: tools/build/configure.ac - 8/139: autoreconf: doc/configure.ac - ...... - 124/139: autoreconf: c/src/make/configure.ac - 125/139: autoreconf: c/src/librtems++/configure.ac - 126/139: autoreconf: c/src/ada-tests/configure.ac - 127/139: autoreconf: testsuites/configure.ac - 128/139: autoreconf: testsuites/libtests/configure.ac - 129/139: autoreconf: testsuites/mptests/configure.ac - 130/139: autoreconf: testsuites/fstests/configure.ac - 131/139: autoreconf: testsuites/sptests/configure.ac - 132/139: autoreconf: testsuites/tmtests/configure.ac - 133/139: autoreconf: testsuites/smptests/configure.ac - 134/139: autoreconf: testsuites/tools/configure.ac - 135/139: autoreconf: testsuites/tools/generic/configure.ac - 136/139: autoreconf: testsuites/psxtests/configure.ac - 137/139: autoreconf: testsuites/psxtmtests/configure.ac - 138/139: autoreconf: testsuites/rhealstone/configure.ac - 139/139: autoreconf: testsuites/samples/configure.ac - Bootstrap time: 0:02:47.398824 - Building a BSP -------------- -We build RTEMS in a directory outside of the source tree we have just cloned -and ``bootstrapped``. You cannot build RTEMS while in the source tree. Lets -create a suitable directory using the name of the BSP we are going to build: +We build RTEMS in a directory within the source tree we have just cloned. For +the details, see the :ref:`BSPBuildSystem`. We will build for the ``erc32`` +BSP with POSIX enabled. Firstly, create the file :file:`config.ini` in the +source tree root directory with the BSP build configuration, for example: -.. code-block:: none +.. code-block:: ini - $ cd .. - $ mkdir erc32 - $ cd erc32 + [sparc/erc32] + RTEMS_POSIX_API = True -Configure RTEMS using the ``configure`` command. We use a full path to -``configure`` so the object files built contain the absolute path of the source -files. If you are source level debugging you will be able to access the source -code to RTEMS from the debugger. We will build for the ``erc32`` BSP with POSIX -enabled and the networking stack disabled: +Configure RTEMS using the ``waf configure`` command: .. code-block:: none - $ $HOME/development/rtems/kernel/rtems/configure --prefix=$HOME/development/rtems/5 \ - --target=sparc-rtems5 --enable-rtemsbsp=erc32 --enable-posix \ - --disable-networking - checking for gmake... no - checking for make... make - checking for RTEMS Version... 4.11.99.0 - checking build system type... x86_64-pc-linux-gnu - checking host system type... x86_64-pc-linux-gnu - checking target system type... sparc-unknown-rtems5 - checking for a BSD-compatible install... /usr/bin/install -c - checking whether build environment is sane... yes - checking for a thread-safe mkdir -p... /bin/mkdir -p - checking for gawk... no - checking for mawk... mawk - checking whether make sets $(MAKE)... yes - checking whether to enable maintainer-specific portions of Makefiles... no - checking that generated files are newer than configure... done - ...... - checking target system type... sparc-unknown-rtems5 - checking rtems target cpu... sparc - checking for a BSD-compatible install... /usr/bin/install -c - checking whether build environment is sane... yes - checking for sparc-rtems5-strip... sparc-rtems5-strip - checking for a thread-safe mkdir -p... /bin/mkdir -p - checking for gawk... no - checking for mawk... mawk - checking whether make sets $(MAKE)... yes - checking whether to enable maintainer-specific portions of Makefiles... no - checking that generated files are newer than configure... done - configure: creating ./config.status - config.status: creating Makefile - - target architecture: sparc. - available BSPs: erc32. - 'make all' will build the following BSPs: erc32. - other BSPs can be built with 'make RTEMS_BSP="bsp1 bsp2 ..."' - - config.status: creating Makefile - -Build RTEMS using two cores: + $ cd $HOME/development/rtems/src/rtems + $ ./waf configure --prefix=$HOME/development/rtems/6 + Setting top to : $HOME/development/rtems/src/rtems + Setting out to : $HOME/development/rtems/src/rtems/build + Regenerate build specification cache (needs a couple of seconds)... + Configure board support package (BSP) : sparc/erc32 + Checking for program 'sparc-rtems6-gcc' : $HOME/development/rtems/6/bin/sparc-rtems6-gcc + Checking for program 'sparc-rtems6-g++' : $HOME/development/rtems/6/bin/sparc-rtems6-g++ + Checking for program 'sparc-rtems6-ar' : $HOME/development/rtems/6/bin/sparc-rtems6-ar + Checking for program 'sparc-rtems6-ld' : $HOME/development/rtems/6/bin/sparc-rtems6-ld + Checking for program 'ar' : $HOME/development/rtems/6/bin/sparc-rtems6-ar + Checking for program 'g++, c++' : $HOME/development/rtems/6/bin/sparc-rtems6-g++ + Checking for program 'ar' : $HOME/development/rtems/6/bin/sparc-rtems6-ar + Checking for program 'gas, gcc' : $HOME/development/rtems/6/bin/sparc-rtems6-gcc + Checking for program 'ar' : $HOME/development/rtems/6/bin/sparc-rtems6-ar + Checking for program 'gcc, cc' : $HOME/development/rtems/6/bin/sparc-rtems6-gcc + Checking for program 'ar' : $HOME/development/rtems/6/bin/sparc-rtems6-ar + Checking for asm flags '-MMD' : yes + Checking for c flags '-MMD' : yes + Checking for cxx flags '-MMD' : yes + Checking for program 'rtems-bin2c' : $HOME/development/rtems/6/bin/rtems-bin2c + Checking for program 'gzip' : /usr/bin/gzip + Checking for program 'xz' : /usr/bin/xz + Checking for program 'rtems-ld' : $HOME/development/rtems/6/bin/rtems-ld + Checking for program 'rtems-syms' : $HOME/development/rtems/6/bin/rtems-syms + Checking for program 'rtems-bin2c' : $HOME/development/rtems/6/bin/rtems-bin2c + Checking for program 'gzip' : /usr/bin/gzip + Checking for program 'xz' : /usr/bin/xz + 'configure' finished successfully (7.996s) + +Build RTEMS: .. code-block:: none - $ make -j 2 - Making all in tools/build - make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build' - make all-am - make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build' - gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT cklength.o -MD -MP -MF .deps/cklength.Tpo -c -o cklength.o /home/chris/development/rtems/kernel/rtems/tools/build/cklength.c - gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT eolstrip.o -MD -MP -MF .deps/eolstrip.Tpo -c -o eolstrip.o /home/chris/development/rtems/kernel/rtems/tools/build/eolstrip.c - mv -f .deps/cklength.Tpo .deps/cklength.Po - mv -f .deps/eolstrip.Tpo .deps/eolstrip.Po - gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT compat.o -MD -MP -MF .deps/compat.Tpo -c -o compat.o /home/chris/development/rtems/kernel/rtems/tools/build/compat.c - gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT packhex.o -MD -MP -MF .deps/packhex.Tpo -c -o packhex.o /home/chris/development/rtems/kernel/rtems/tools/build/packhex.c - mv -f .deps/compat.Tpo .deps/compat.Po - gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT unhex.o -MD -MP -MF .deps/unhex.Tpo -c -o unhex.o /home/chris/development/rtems/kernel/rtems/tools/build/unhex.c - mv -f .deps/packhex.Tpo .deps/packhex.Po - gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT rtems-bin2c.o -MD -MP -MF .deps/rtems-bin2c.Tpo -c -o rtems-bin2c.o /home/chris/development/rtems/kernel/rtems/tools/build/rtems-bin2c.c - mv -f .deps/unhex.Tpo .deps/unhex.Po - gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT binpatch.o -MD -MP -MF .deps/binpatch.Tpo -c -o binpatch.o /home/chris/development/rtems/kernel/rtems/tools/build/binpatch.c - mv -f .deps/rtems-bin2c.Tpo .deps/rtems-bin2c.Po - gcc -g -O2 -o cklength cklength.o - mv -f .deps/binpatch.Tpo .deps/binpatch.Po - gcc -g -O2 -o eolstrip eolstrip.o compat.o - gcc -g -O2 -o packhex packhex.o - gcc -g -O2 -o rtems-bin2c rtems-bin2c.o compat.o - gcc -g -O2 -o unhex unhex.o compat.o - gcc -g -O2 -o binpatch binpatch.o - make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build' - make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build' - Making all in tools/cpu - make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu' - Making all in generic - make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic' - make[2]: Nothing to be done for 'all'. - make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic' - make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu' - make[2]: Nothing to be done for 'all-am'. - make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu' - make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu' - Making all in testsuites/tools - make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools' - Making all in generic - make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools/generic' - make[2]: Nothing to be done for 'all'. - make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools/generic' - make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools' - make[2]: Nothing to be done for 'all-am'. - make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools' - make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools' - Making all in sparc-rtems5/c - make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/c' - Making all in . - make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/c' - Configuring RTEMS_BSP=erc32 - checking for gmake... no - checking for make... make - checking build system type... x86_64-pc-linux-gnu - checking host system type... sparc-unknown-rtems5 - ...... - sparc-rtems5-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs -I.. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/../support/include -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT init.o -MD -MP -MF .deps/init.Tpo -c -o init.o /home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs/init.c - sparc-rtems5-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs -I.. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/../support/include -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT empty.o -MD -MP -MF .deps/empty.Tpo -c -o empty.o /home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs/empty.c - mv -f .deps/empty.Tpo .deps/empty.Po - mv -f .deps/init.Tpo .deps/init.Po - sparc-rtems5-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -Wl,--gc-sections -mcpu=cypress -o nsecs.exe init.o empty.o - sparc-rtems5-nm -g -n nsecs.exe > nsecs.num - sparc-rtems5-size nsecs.exe - text data bss dec hex filename - 121392 1888 6624 129904 1fb70 nsecs.exe - cp nsecs.exe nsecs.ralf - make[6]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/ c/erc32/testsuites/samples/nsecs' - make[5]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/ c/erc32/testsuites/samples' - make[4]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/ c/erc32/testsuites/samples' - make[4]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/ c/erc32/testsuites' - make[4]: Nothing to be done for 'all-am'. - make[4]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/ c/erc32/testsuites' - make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/ c/erc32/testsuites' - make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/ c/erc32' - make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/c' - make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32' - make[1]: Nothing to be done for 'all-am'. - make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32' + $ ./waf + Waf: Entering directory `$HOME/development/rtems/src/rtems/build' + Waf: Leaving directory `$HOME/development/rtems/src/rtems/build' + 'build' finished successfully (0.051s) + Waf: Entering directory `$HOME/development/rtems/src/rtems/build/sparc/erc32' + [ 1/1524] Compiling bsps/shared/dev/serial/mc68681_reg2.c + [ 2/1524] Compiling bsps/shared/dev/rtc/mc146818a_ioreg.c + [ 3/1524] Compiling bsps/shared/dev/flash/am29lv160.c + ... + [1521/1524] Linking $HOME/development/rtems/src/rtems/build/sparc/erc32/libz.a + [1522/1524] Linking $HOME/development/rtems/src/rtems/build/sparc/erc32/librtemscxx.a + [1523/1524] Linking $HOME/development/rtems/src/rtems/build/sparc/erc32/testsuites/samples/paranoia.exe + [1524/1524] Linking $HOME/development/rtems/src/rtems/build/sparc/erc32/libmghttpd.a + Waf: Leaving directory `$HOME/development/rtems/src/rtems/build/sparc/erc32' + 'build_sparc/erc32' finished successfully (4.894s) Installing A BSP ---------------- @@ -252,46 +114,20 @@ RTEMS with the following command: .. code-block:: none - $ make install - Making install in tools/build - make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build' - make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build' - /bin/mkdir -p '/home/chris/development/rtems/5/bin' - /usr/bin/install -c cklength eolstrip packhex unhex rtems-bin2c '/home/chris/development/rtems/5/bin' - /bin/mkdir -p '/home/chris/development/rtems/5/bin' - /usr/bin/install -c install-if-change '/home/chris/development/rtems/5/bin' - make[2]: Nothing to be done for 'install-data-am'. - make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build' - make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build' - Making install in tools/cpu - make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu' - Making install in generic - make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic' - make[3]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic' - make[3]: Nothing to be done for 'install-exec-am'. - make[3]: Nothing to be done for 'install-data-am'. - make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic' - make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic' - make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu' - make[3]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu' - make[3]: Nothing to be done for 'install-exec-am'. - make[3]: Nothing to be done for 'install-data-am'. - make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu' - make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu' - make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu' - .... - make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems5/c' - make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32' - make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32' - make[2]: Nothing to be done for 'install-exec-am'. - /bin/mkdir -p '/home/chris/development/rtems/5/make' - /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/main.cfg /home/chris/development/rtems/kernel/rtems/make/leaf.cfg '/home/chris/development/rtems/5/make' - /bin/mkdir -p '/home/chris/development/rtems/5/share/rtems5/make/Templates' - /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.dir /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.leaf /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.lib '/home/chris/development/rtems/5/share/rtems5/make/Templates' - /bin/mkdir -p '/home/chris/development/rtems/5/make/custom' - /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/custom/default.cfg '/home/chris/development/rtems/5/make/custom' - make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32' - make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32' + $ ./waf install + Waf: Entering directory `$HOME/development/rtems/src/rtems/build' + Waf: Leaving directory `$HOME/development/rtems/src/rtems/build' + 'install' finished successfully (0.074s) + Waf: Entering directory `$HOME/development/rtems/src/rtems/build/sparc/erc32' + + install $HOME/development/rtems/6/sparc-rtems6/erc32/lib/include/libchip/am29lv160.h (from bsps/include/libchip/am29lv160.h) + + install $HOME/development/rtems/6/sparc-rtems6/erc32/lib/include/libchip/mc146818a.h (from bsps/include/libchip/mc146818a.h) + + install $HOME/development/rtems/6/sparc-rtems6/erc32/lib/include/libchip/mc68681.h (from bsps/include/libchip/mc68681.h) + ... + + install $HOME/development/rtems/6/sparc-rtems6/erc32/lib/include/rtems/version.h (from cpukit/include/rtems/version.h) + + install $HOME/development/rtems/6/sparc-rtems6/erc32/lib/include/rtems/vmeintr.h (from cpukit/include/rtems/vmeintr.h) + + install $HOME/development/rtems/6/sparc-rtems6/erc32/lib/include/rtems/watchdogdrv.h (from cpukit/include/rtems/watchdogdrv.h) + Waf: Leaving directory `$HOME/development/rtems/src/rtems/build/sparc/erc32' + 'install_sparc/erc32' finished successfully (0.637s) Contributing Patches -------------------- @@ -313,7 +149,7 @@ has changed: .. code-block:: none - $ cd ../rtems + $ cd $HOME/development/rtems/src/rtems $ git status On branch master Your branch is up-to-date with 'origin/master'. diff --git a/user/installation/project-sandboxing.rst b/user/installation/project-sandboxing.rst index 248a136..bba7e8a 100644 --- a/user/installation/project-sandboxing.rst +++ b/user/installation/project-sandboxing.rst @@ -18,11 +18,12 @@ directory suitable permissions to be writable by you as a user. Lets create a project sandbox for my *Box Sorter* project. First create a project directory called :file:`/bd/projects/box-sorter`. Under this create -:file:`rtems` and under that create :file:`rtems-4.11.0`. Under this path you -can follow the :ref:`released-version` procedure to build a tool set using the -prefix of :file:`/bd/projects/box-sorter/rtems/4.11.0`. You are free to create -your project specific directories under :file:`/bd/projects/box-sorter`. The -top level directories would be: +:file:`rtems` and under that create :file:`rtems-@rtems-ver-majminrev@`. Under +this path you can follow the :ref:`released-version` procedure to build a tool +set using the prefix of +:file:`/bd/projects/box-sorter/rtems/@rtems-ver-majminrev@`. You are free to +create your project specific directories under +:file:`/bd/projects/box-sorter`. The top level directories would be: :file:`/bd/projects` Project specific development trees. @@ -30,9 +31,9 @@ top level directories would be: :file:`/bd/projects/box-sorter` Box Sorter project sandbox. -:file:`/bd/projects/box-sorter/rtems/4.11.0` - Project prefix for RTEMS 4.11.0 compiler, debuggers, tools and installed - Board Support Package (BSP). +:file:`/bd/projects/box-sorter/rtems/@rtems-ver-majminrev@` + Project prefix for RTEMS @rtems-ver-majminrev@ compiler, debuggers, tools and + installed Board Support Package (BSP). A variation is to use the ``--without-rtems`` option with the RSB to not build the BSPs when building the tools and to build RTEMS specifically for each @@ -43,8 +44,9 @@ RTEMS. The top level directories would be: :file:`/bd/rtems` The top path to production tools. -:file:`/bd/rtems/4.11.0` - Production prefix for RTEMS 4.11.0 compiler, debuggers and tools. +:file:`/bd/rtems/@rtems-ver-majminrev@` + Production prefix for RTEMS @rtems-ver-majminrev@ compiler, debuggers and + tools. :file:`/bd/projects` Project specific development trees. @@ -62,14 +64,16 @@ up with: :file:`/bd/rtems` The top path to production tools and kernels. -:file:`/bd/rtems/4.11.0` - Production prefix for RTEMS 4.11.0. +:file:`/bd/rtems/@rtems-ver-majminrev@` + Production prefix for RTEMS @rtems-ver-majminrev@. -:file:`/bd/rtems/4.11.0/tools` - Production prefix for RTEMS 4.11.0 compiler, debuggers and tools. +:file:`/bd/rtems/@rtems-ver-majminrev@/tools` + Production prefix for RTEMS @rtems-ver-majminrev@ compiler, debuggers and + tools. -:file:`/bd/rtems/4.11.0/bsps` - Production prefix for RTEMS 4.11.0 Board Support Packages (BSPs). +:file:`/bd/rtems/@rtems-ver-majminrev@/bsps` + Production prefix for RTEMS @rtems-ver-majminrev@ Board Support Packages + (BSPs). :file:`/bd/projects` Project specific development trees. @@ -84,9 +88,9 @@ directories would be: :file:`/bd/rtems` The top path to production tools and kernels. -:file:`/bd/rtems/4.11.0` - Production prefix for RTEMS 4.11.0 compiler, debuggers, tools and Board - Support Packages (BSPs). +:file:`/bd/rtems/@rtems-ver-majminrev@` + Production prefix for RTEMS @rtems-ver-majminrev@ compiler, debuggers, tools + and Board Support Packages (BSPs). :file:`/bd/projects` Project specific development trees. diff --git a/user/installation/releases.rst b/user/installation/releases.rst index a20f948..6694806 100644 --- a/user/installation/releases.rst +++ b/user/installation/releases.rst @@ -30,11 +30,11 @@ more detail about path lengths on Windows. The location used to install the tools and kernel is called the `prefix`. :ref:`QuickStartPrefixes` explains prefixes and how to use them. It is best to have a `prefix` for each different version of RTEMS you are using. If you are -using RTEMS 4.11 in production it is **not** a good idea to install a -development version of 5 over the top by using the same `prefix` as the 4.11 -build. A separate `prefix` for each version avoids this. +using RTEMS in production it is **not** a good idea to install a development +version of over the top by using the same `prefix`. A separate `prefix` for each +version avoids this. -Released versions of the RTEMS Source Builder (RSB) downloads all source code +Released versions of the RTEMS Source Builder (RSB) download all source code for all packages from the :r:url:`ftp` rather than from the package's home site. Hosting all the source on the :r:url:`ftp` ensures the source is present for the life of the release on the :r:url:`ftp`. If there is a problem @@ -47,9 +47,8 @@ shosted here. It has excellent internet access and performance. .. note:: **Controlling the RTEMS Kernel Build** - Building releases by default does not build the RTEMS kernel. To - build the RTEMS kernel add the ``--with-rtems`` option to the RSB - command line. + Building RSB releases by default does not build the RTEMS kernel. To build + the RTEMS kernel add the ``--with-rtems`` option to the RSB command line. By default all the BSPs for an architecture are built. If you only wish to have a specific BSP built you can specify the BSP list by providing to the @@ -86,33 +85,33 @@ Download the RTEMS Source Builder (RSB) from the RTEMS FTP server: .. code-block:: none - $ wget https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz - --2016-03-21 10:50:04-- https://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-source-builder-4.11.0.tar.xz + $ wget https://ftp.rtems.org/pub/rtems/releases/@rtems-ver-major@/@rtems-ver-majminrev@/rtems-source-builder-@rtems-ver-majminrev@.tar.xz + --2016-03-21 10:50:04-- https://ftp.rtems.org/pub/rtems/releases/@rtems-ver-major/@rtems-ver-majminrev@/rtems-source-builder-@rtems-ver-majminrev@.tar.xz Resolving ftp.rtems.org (ftp.rtems.org)... 140.211.10.151 Connecting to ftp.rtems.org (ftp.rtems.org)|140.211.10.151|:443... connected. HTTP request sent, awaiting response... 200 OK Length: 967056 (944K) [application/x-xz] - Saving to: 'rtems-source-builder-4.11.0.tar.xz' + Saving to: 'rtems-source-builder-@rtems-ver-majminrev@.tar.xz' - rtems-source-builder-4.1 100%[====================================>] 944.39K 206KB/s in 5.5s + rtems-source-builder-@rtems-ver-majminrev@ 100%[====================================>] 944.39K 206KB/s in 5.5s - 2016-03-21 10:50:11 (173 KB/s) - 'rtems-source-builder-4.11.0.tar.xz' saved [967056/967056] + 2016-03-21 10:50:11 (173 KB/s) - 'rtems-source-builder-@rtems-ver-majminrev@.tar.xz' saved [967056/967056] On Unix unpack the RSB release tar file using: .. code-block:: none - $ tar Jxf rtems-source-builder-4.11.0.tar.xz - $ cd rtems-source-builder-4.11.0/rtems/ + $ tar Jxf rtems-source-builder-@rtems-ver-majminrev@.tar.xz + $ cd rtems-source-builder-@rtems-ver-majminrev@/rtems/ On Windows you need to shorten the path (See :ref:`windows-path-length`) after you have unpacked the tar file: .. code-block:: none - $ tar Jxf rtems-source-builder-4.11.0.tar.xz - $ mv rtems-source-builder-4.11.0 4.110 - $ cd 4.11.0 + $ tar Jxf rtems-source-builder-@rtems-ver-majminrev@.tar.xz + $ mv rtems-source-builder-@rtems-ver-majminrev@ @rtems-ver-majminrev@ + $ cd @rtems-ver-majminrev@ Build a tool chain for the SPARC architecure. We are using the SPARC architecture in our example because GDB has a good simulator that lets us run @@ -124,164 +123,6 @@ discussed in :ref:`msys2_parallel_builds`. .. code-block:: none $ ../source-builder/sb-set-builder \ - --prefix=/opt/rtems/4.11 4.11/rtems-sparc - Build Set: 4.11/rtems-sparc - Build Set: 4.11/rtems-autotools.bset - Build Set: 4.11/rtems-autotools-internal.bset - config: tools/rtems-autoconf-2.69-1.cfg - package: autoconf-2.69-x86_64-freebsd10.1-1 - Creating source directory: sources - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz - downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%) - building: autoconf-2.69-x86_64-freebsd10.1-1 - config: tools/rtems-automake-1.12.6-1.cfg - package: automake-1.12.6-x86_64-freebsd10.1-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz - downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%) - Creating source directory: patches - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%) - building: automake-1.12.6-x86_64-freebsd10.1-1 - cleaning: autoconf-2.69-x86_64-freebsd10.1-1 - cleaning: automake-1.12.6-x86_64-freebsd10.1-1 - Build Set: Time 0:00:32.749337 - Build Set: 4.11/rtems-autotools-base.bset - config: tools/rtems-autoconf-2.69-1.cfg - package: autoconf-2.69-x86_64-freebsd10.1-1 - building: autoconf-2.69-x86_64-freebsd10.1-1 - reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.txt - reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-freebsd10.1-1.xml - config: tools/rtems-automake-1.12.6-1.cfg - package: automake-1.12.6-x86_64-freebsd10.1-1 - building: automake-1.12.6-x86_64-freebsd10.1-1 - reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.txt - reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-freebsd10.1-1.xml - installing: autoconf-2.69-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - installing: automake-1.12.6-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - cleaning: autoconf-2.69-x86_64-freebsd10.1-1 - cleaning: automake-1.12.6-x86_64-freebsd10.1-1 - Build Set: Time 0:00:15.619219 - Build Set: Time 0:00:48.371085 - config: devel/expat-2.1.0-1.cfg - package: expat-2.1.0-x86_64-freebsd10.1-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz - downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%) - building: expat-2.1.0-x86_64-freebsd10.1-1 - reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.txt - reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-freebsd10.1-1.xml - config: tools/rtems-binutils-2.26-1.cfg - package: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2 - downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%) - building: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 - reporting: tools/rtems-binutils-2.26-1.cfg -> - sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.txt - reporting: tools/rtems-binutils-2.26-1.cfg -> - sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1.xml - config: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg - package: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gcc-4.9.3.tar.bz2 -> sources/gcc-4.9.3.tar.bz2 - downloading: sources/gcc-4.9.3.tar.bz2 - 85.8MB of 85.8MB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/newlib-2.2.0.20150423.tar.gz -> sources/newlib-2.2.0.20150423.tar.gz - downloading: sources/newlib-2.2.0.20150423.tar.gz - 16.7MB of 16.7MB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpfr-3.0.1.tar.bz2 -> sources/mpfr-3.0.1.tar.bz2 - downloading: sources/mpfr-3.0.1.tar.bz2 - 1.1MB of 1.1MB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/mpc-0.8.2.tar.gz -> sources/mpc-0.8.2.tar.gz - downloading: sources/mpc-0.8.2.tar.gz - 535.5kB of 535.5kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gmp-5.0.5.tar.bz2 -> sources/gmp-5.0.5.tar.bz2 - downloading: sources/gmp-5.0.5.tar.bz2 - 2.0MB of 2.0MB (100%) - building: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 - reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg -> - sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.txt - reporting: tools/rtems-gcc-4.9.3-newlib-2.2.0-20150423-1.cfg -> - sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1.xml - config: tools/rtems-gdb-7.9-1.cfg - package: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz - downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch -> patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - downloading: patches/0001-sim-erc32-Disassembly-in-stand-alone-mode-did-not-wo.patch - 1.9kB of 1.9kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch -> patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - downloading: patches/0002-sim-erc32-Corrected-wrong-CPU-implementation-and-ver.patch - 827.0 bytes of 827.0 bytes (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch -> patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - downloading: patches/0003-sim-erc32-Perform-pseudo-init-if-binary-linked-to-no.patch - 2.6kB of 2.6kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch -> patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - downloading: patches/0004-sim-erc32-Use-fenv.h-for-host-FPU-access.patch - 4.9kB of 4.9kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch -> patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - downloading: patches/0005-sim-erc32-Remove-unused-defines-in-Makefile-and-swit.patch - 871.0 bytes of 871.0 bytes (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch -> patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - downloading: patches/0006-sim-erc32-Fix-incorrect-simulator-performance-report.patch - 5.6kB of 5.6kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch -> patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - downloading: patches/0007-sim-erc32-File-loading-via-command-line-did-not-work.patch - 1.0kB of 1.0kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch -> patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - downloading: patches/0008-sim-erc32-Added-v-command-line-switch-for-verbose-ou.patch - 3.6kB of 3.6kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch -> patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - downloading: patches/0009-sim-erc32-Removed-type-mismatch-compiler-warnings.patch - 1.9kB of 1.9kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch -> patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - downloading: patches/0010-sim-erc32-Switched-emulated-memory-to-host-endian-or.patch - 16.0kB of 16.0kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch -> patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - downloading: patches/0011-sim-erc32-use-SIM_AC_OPTION_HOSTENDIAN-to-probe-for-.patch - 14.8kB of 14.8kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch -> patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - downloading: patches/0012-sim-erc32-Use-memory_iread-function-for-instruction-.patch - 3.8kB of 3.8kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0013-sim-erc32-Fix-a-few-compiler-warnings.patch-> patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - downloading: patches/0013-sim-erc32-Fix-a-few-compiler-warnings.patch - 2.2kB of 2.2kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch -> patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - downloading: patches/0014-sim-erc32-Use-gdb-callback-for-UART-I-O-when-linked-.patch - 9.2kB of 9.2kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch -> patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - downloading: patches/0015-sim-erc32-Access-memory-subsystem-through-struct-mem.patch - 22.9kB of 22.9kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch -> patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - downloading: patches/0016-sim-erc32-Use-readline.h-for-readline-types-and-func.patch - 1.5kB of 1.5kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch -> patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - downloading: patches/0017-sim-erc32-Move-local-extern-declarations-into-sis.h.patch - 5.8kB of 5.8kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch -> patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - downloading: patches/0018-sim-erc32-Add-support-for-LEON3-processor-emulation.patch - 66.7kB of 66.7kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch -> patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - downloading: patches/0019-sim-erc32-Add-support-for-LEON2-processor-emulation.patch - 26.1kB of 26.1kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0020-sim-erc32-Updated-documentation.patch -> patches/0020-sim-erc32-Updated-documentation.patch - downloading: patches/0020-sim-erc32-Updated-documentation.patch - 16.1kB of 16.1kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0021-sim-erc32-Add-data-watchpoint-support.patch -> patches/0021-sim-erc32-Add-data-watchpoint-support.patch - downloading: patches/0021-sim-erc32-Add-data-watchpoint-support.patch - 10.1kB of 10.1kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch -> patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - downloading: patches/0022-Add-watchpoint-support-to-gdb-simulator-interface.patch - 25.5kB of 25.5kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch -> patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - downloading: patches/0023-sim-erc32-ELF-loading-could-fail-on-unaligned-sectio.patch - 1.3kB of 1.3kB (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff - downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff - downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%) - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/sources/patch-gdb-python-python-config.py -> patches/patch-gdb-python-python-config.py - downloading: patches/patch-gdb-python-python-config.py - 449.0 bytes of 449.0 bytes (100%) - building: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 - reporting: tools/rtems-gdb-7.9-1.cfg -> - sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.txt - reporting: tools/rtems-gdb-7.9-1.cfg -> - sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1.xml - config: tools/rtems-tools-4.11-1.cfg - package: rtems-tools-4.11.0-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-tools-4.11.0.tar.xz -> sources/rtems-tools-4.11.0.tar.xz - downloading: sources/rtems-tools-4.11.0.tar.xz - 1.6MB of 1.6MB (100%) - building: rtems-tools-4.11.0-1 - reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.txt - reporting: tools/rtems-tools-4.11-1.cfg -> rtems-tools-4.11.0-1.xml - config: tools/rtems-kernel-4.11.cfg - package: sparc-rtems4.11-kernel-4.11.0-1 - download: ftp://ftp.rtems.org/pub/rtems/releases/4.11/4.11.0/rtems-4.11.0.tar.xz -> sources/rtems-4.11.0.tar.xz - downloading: sources/rtems-4.11.0.tar.xz - 9.3MB of 9.3MB (100%) - building: sparc-rtems4.11-kernel-4.11.0-1 - reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.txt - reporting: tools/rtems-kernel-4.11.cfg -> sparc-rtems4.11-kernel-4.11.0-1.xml - installing: expat-2.1.0-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - installing: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - installing: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - installing: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 -> /opt/work/rtems/4.11.0 - installing: rtems-tools-4.11.0-1 -> /opt/work/rtems/4.11.0 - installing: sparc-rtems4.11-kernel-4.11.0-1 -> /opt/work/rtems/4.11.0 - cleaning: expat-2.1.0-x86_64-freebsd10.1-1 - cleaning: sparc-rtems4.11-binutils-2.26-x86_64-freebsd10.1-1 - cleaning: sparc-rtems4.11-gcc-4.9.3-newlib-2.2.0.20150423-x86_64-freebsd10.1-1 - cleaning: sparc-rtems4.11-gdb-7.9-x86_64-freebsd10.1-1 - cleaning: rtems-tools-4.11.0-1 - cleaning: sparc-rtems4.11-kernel-4.11.0-1 - Build Set: Time 0:19:15.713662 + --prefix=/opt/rtems/@rtems-ver-major@ @rtems-ver-major@/rtems-sparc You can now build a third-party library or an application as defaulted in TBD. |