1 files changed, 96 insertions, 0 deletions
diff --git a/cpu_supplement/openrisc_1000.rst b/cpu_supplement/openrisc_1000.rst
new file mode 100644
index 0000000..fe6d955
--- /dev/null
+++ b/cpu_supplement/openrisc_1000.rst
@@ -0,0 +1,96 @@
+OpenRISC 1000 Specific Information
+##################################
+
+This chapter discusses the`OpenRISC 1000 architecture <http://opencores.org/or1k/Main_Page>`_
+dependencies in this port of RTEMS. There are many implementations
+for OpenRISC like or1200 and mor1kx. Currently RTEMS supports basic
+features that all implementations should have.
+
+**Architecture Documents**
+
+For information on the OpenRISC 1000 architecture refer to the`OpenRISC 1000 architecture manual <http://openrisc.github.io/or1k.html>`_.
+
+Calling Conventions
+===================
+
+Please refer to the`Function Calling Sequence <http://openrisc.github.io/or1k.html#__RefHeading__504887_595890882>`_.
+
+Floating Point Unit
+-------------------
+
+A floating point unit is currently not supported.
+
+Memory Model
+============
+
+A flat 32-bit memory model is supported.
+
+Interrupt Processing
+====================
+
+OpenRISC 1000 architecture has 13 exception types:
+
+- Reset
+
+- Bus Error
+
+- Data Page Fault
+
+- Instruction Page Fault
+
+- Tick Timer
+
+- Alignment
+
+- Illegal Instruction
+
+- External Interrupt
+
+- D-TLB Miss
+
+- I-TLB Miss
+
+- Range
+
+- System Call
+
+- Floating Point
+
+- Trap
+
+Interrupt Levels
+----------------
+
+There are only two levels: interrupts enabled and interrupts disabled.
+
+Interrupt Stack
+---------------
+
+The OpenRISC RTEMS port uses a dedicated software interrupt stack.
+The stack for interrupts is allocated during interrupt driver initialization.
+When an  interrupt is entered, the _ISR_Handler routine is responsible for
+switching from the interrupted task stack to RTEMS software interrupt stack.
+
+Default Fatal Error Processing
+==============================
+
+The default fatal error handler for this architecture performs the
+following actions:
+
+- disables operating system supported interrupts (IRQ),
+
+- places the error code in ``r0``, and
+
+- executes an infinite loop to simulate a halt processor instruction.
+
+Symmetric Multiprocessing
+=========================
+
+SMP is not supported.
+
+.. COMMENT: COPYRIGHT (c) 1989-2007.
+
+.. COMMENT: On-Line Applications Research Corporation (OAR).
+
+.. COMMENT: All rights reserved.
+