Diffstat (limited to '')
1 files changed, 10 insertions, 10 deletions
diff --git a/cpu_supplement/intel_amd_x86.rst b/cpu_supplement/intel_amd_x86.rst
index 59db1cd..1ba9498 100644
@@ -9,14 +9,14 @@ than being designed for growth.
For information on the i386 processor, refer to the
-- *386 Programmer’s Reference Manual, Intel, Order No. 230985-002*.
+- *386 Programmer's Reference Manual, Intel, Order No. 230985-002*.
- *386 Microprocessor Hardware Reference Manual, Intel,
Order No. 231732-003*.
-- *80386 System Software Writer’s Guide, Intel, Order No. 231499-001*.
+- *80386 System Software Writer's Guide, Intel, Order No. 231499-001*.
-- *80387 Programmer’s Reference Manual, Intel, Order No. 231917-001*.
+- *80387 Programmer's Reference Manual, Intel, Order No. 231917-001*.
CPU Model Dependent Features
@@ -33,7 +33,7 @@ The macro ``I386_HAS_BSWAP`` is set to 1 to indicate that
this CPU model has the ``bswap`` instruction which
endian swaps a thirty-two bit quantity. This instruction
appears to be present in all CPU models
-i486’s and above.
+i486's and above.
@@ -128,8 +128,8 @@ Interrupt Processing
Although RTEMS hides many of the processor
dependent details of interrupt processing, it is important to
understand how the RTEMS interrupt manager is mapped onto the
-processor’s unique architecture. Discussed in this chapter are
-the the processor’s response and control mechanisms as they
+processor's unique architecture. Discussed in this chapter are
+the the processor's response and control mechanisms as they
pertain to RTEMS.
Vectoring of Interrupt Handler
@@ -175,7 +175,7 @@ Interrupt Levels
Although RTEMS supports 256 interrupt levels, the
-i386 only supports two – enabled and disabled. Interrupts are
+i386 only supports two - enabled and disabled. Interrupts are
enabled when the interrupt-enable flag (IF) in the extended
flags (EFLAGS) is set. Conversely, interrupt processing is
inhibited when the IF is cleared. During a non-maskable
@@ -225,7 +225,7 @@ System Reset
An RTEMS based application is initiated when the i386 processor is reset.
When the i386 is reset,
-- The EAX register is set to indicate the results of the processor’s
+- The EAX register is set to indicate the results of the processor's
power-up self test. If the self-test was not executed, the contents of
this register are undefined. Otherwise, a non-zero value indicates the
processor is faulty and a zero value indicates a successful self-test.
@@ -253,7 +253,7 @@ When the i386 is reset,
lines are lowered and the processor begins executing in the first megabyte
-Typically, an intersegment JMP to the application’s initialization code is
+Typically, an intersegment JMP to the application's initialization code is
placed at address 0xFFFFFFF0.
@@ -306,7 +306,7 @@ which is executed before the call to initialize_executive has the following
For more information regarding the i386 data structures and their
-contents, refer to Intel’s 386 Programmer’s Reference Manual.
+contents, refer to Intel's 386 Programmer's Reference Manual.
.. COMMENT: COPYRIGHT (c) 1988-2002.