summaryrefslogtreecommitdiffstats
path: root/user
diff options
context:
space:
mode:
authorChris Johns <chrisj@rtems.org>2016-03-10 13:25:27 +1100
committerAmar Takhar <verm@darkbeer.org>2016-05-02 20:51:26 -0400
commit4e3cf2b2f80095747482409e3cea951286a6d697 (patch)
treea8893990f5bd509cf01d542867d947f0768e4980 /user
parentc05e43b4a37277384a5d7ae8d38e150e9a38b237 (diff)
downloadrtems-docs-4e3cf2b2f80095747482409e3cea951286a6d697.tar.bz2
Split installation into separate files.
Diffstat (limited to 'user')
-rw-r--r--user/conf.py2
-rw-r--r--user/start/development.rst614
-rw-r--r--user/start/index.rst1
-rw-r--r--user/start/installation.rst624
-rw-r--r--user/start/releases.rst11
-rw-r--r--user/start/windows.rst26
6 files changed, 646 insertions, 632 deletions
diff --git a/user/conf.py b/user/conf.py
index 29586ca..7a45a97 100644
--- a/user/conf.py
+++ b/user/conf.py
@@ -12,6 +12,8 @@ exclude_patterns = ['config/build.rst',
'config/runtime.rst',
'start/depend.rst',
'start/transition.rst',
+ 'start/releases.rst',
+ 'start/development.rst',
'start/installation.rst',
'start/windows.rst',
'test/create.rst',
diff --git a/user/start/development.rst b/user/start/development.rst
new file mode 100644
index 0000000..15000d9
--- /dev/null
+++ b/user/start/development.rst
@@ -0,0 +1,614 @@
+.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org>
+.. comment: All rights reserved.
+
+.. _development-version:
+
+Development Version
+-------------------
+.. index:: Git
+
+RTEMS provides open access to it's development processes. The project encouages
+all users to inspect, review, comment and contribute to the code base. The
+processes described here are the same processes the core development team use
+when developing and maintaining RTEMS.
+
+.. warning::
+
+ The development version is not for use in production and it can break from
+ time to time.
+
+.. sidebar:: *GDB and Python*
+
+ RTEMS uses Python in GDB to aid debugging which means GDB needs to be built
+ with Python development libraries. Please check the RSB documentation and
+ install the packages specified for your host. Make sure a python development
+ package is included.
+
+The following procedure assumes you have installed and configured your host
+operating. It also assumes you have installed any dependent packages needed
+when building the tools and the kernel.
+
+You need to select a location to build and install the RTEMS Tool chain and
+RTEMS. Make sure there is plenty of disk space and a fast disk is
+recommended. Our procedure will document building and installing the tools in a
+home directory called :file:`development/rtems`. Using a home directory means
+you can do this without needing to be root. You can also use
+:file:`/opt/rtems/build` if you have access to that path.
+
+The location used to install the tools and kernel is called the `prefix`. It is
+best to have a `prefix` for each different version of RTEMS you are using. If
+you are using RTEMS 4.11 in production it is not a good to install a
+development version of 4.12 over the top. A separate `prefix` for each version
+avoids this.
+
+The RTEMS tool chain changes less often than the RTEMS kernel. One method of
+working with development releases is to have a separate `prefix` for the RTEMS
+tools and a different one for the RTEMS kernel. You can then update each
+without interacting with the other. You can also have a number of RTEMS
+versions available to test with.
+
+This procedure will build a SPARC tool chain.
+
+RTEMS Tools Chain
+~~~~~~~~~~~~~~~~~
+
+Clone the RTEMS Source Builder (RSB) repository:
+
+.. code-block:: shell
+
+ $ cd
+ $ mkdir -p development/rtems
+ $ cd development/rtems
+ $ git clone git://git.rtems.org/rtems-source-builder.git rsb
+ Cloning into 'rsb'...
+ remote: Counting objects: 5837, done.
+ remote: Compressing objects: 100% (2304/2304), done.
+ remote: Total 5837 (delta 4014), reused 5056 (delta 3494)
+ Receiving objects: 100% (5837/5837), 2.48 MiB | 292.00 KiB/s, done.
+ Resolving deltas: 100% (4014/4014), done.
+ Checking connectivity... done.
+
+.. sidebar:: *Downloading the source*
+
+ You need an internet connection to download the source. The downloaded source
+ is cached locally and the RSB checksums it. If you run a build again the
+ download output will be missing. Using the RSB from git will download the
+ source from the upstream project's home site and this could be `http`, `ftp`,
+ or `git`.
+
+Check all the host packages you need are present. Current libraries are not
+checked and this includes checking for the python development libraries GDB
+requires:
+
+.. code-block:: shell
+
+ $ cd rsb
+ $ ./source-builder/sb-check
+ RTEMS Source Builder - Check, 4.12 (e645642255cc)
+ Environment is ok
+
+Build a tool chain for the SPARC architecure. We are using the SPARC
+architecture because GDB has a good simulator that lets us run and test the
+samples RTEMS builds by default. The current development version
+is `4.12` and is on master:
+
+.. code-block:: shell
+
+ $ cd rtems
+ $ ../source-builder/sb-set-builder \
+ --prefix=/usr/home/chris/development/rtems/4.12 4.12/rtems-sparc
+ RTEMS Source Builder - Set Builder, 4.12 (e645642255cc)
+ Build Set: 4.12/rtems-sparc
+ Build Set: 4.12/rtems-autotools.bset
+ Build Set: 4.12/rtems-autotools-internal.bset
+ config: tools/rtems-autoconf-2.69-1.cfg
+ package: autoconf-2.69-x86_64-linux-gnu-1
+ Creating source directory: sources
+ download: ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
+ downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
+ building: autoconf-2.69-x86_64-linux-gnu-1
+ config: tools/rtems-automake-1.12.6-1.cfg
+ package: automake-1.12.6-x86_64-linux-gnu-1
+ download: ftp://ftp.gnu.org/gnu/automake/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
+ downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
+ Creating source directory: patches
+ download: https://git.rtems.org/rtems-tools/plain/tools/4.12/automake/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff
+ downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%)
+ building: automake-1.12.6-x86_64-linux-gnu-1
+ cleaning: autoconf-2.69-x86_64-linux-gnu-1
+ cleaning: automake-1.12.6-x86_64-linux-gnu-1
+ Build Set: Time 0:00:17.465024
+ Build Set: 4.12/rtems-autotools-base.bset
+ config: tools/rtems-autoconf-2.69-1.cfg
+ package: autoconf-2.69-x86_64-linux-gnu-1
+ building: autoconf-2.69-x86_64-linux-gnu-1
+ reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.txt
+ reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.xml
+ config: tools/rtems-automake-1.12.6-1.cfg
+ package: automake-1.12.6-x86_64-linux-gnu-1
+ building: automake-1.12.6-x86_64-linux-gnu-1
+ reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.txt
+ reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.xml
+ installing: autoconf-2.69-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
+ installing: automake-1.12.6-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
+ cleaning: autoconf-2.69-x86_64-linux-gnu-1
+ cleaning: automake-1.12.6-x86_64-linux-gnu-1
+ Build Set: Time 0:00:05.358624
+ Build Set: Time 0:00:22.824422
+ config: devel/expat-2.1.0-1.cfg
+ package: expat-2.1.0-x86_64-linux-gnu-1
+ download: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
+ redirect: http://internode.dl.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
+ downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
+ building: expat-2.1.0-x86_64-linux-gnu-1
+ reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.txt
+ reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.xml
+ config: tools/rtems-binutils-2.26-1.cfg
+ package: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
+ download: ftp://ftp.gnu.org/gnu/binutils/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2
+ downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%)
+ download: https://git.rtems.org/rtems-tools/plain/tools/4.12/binutils/binutils-2.26-rtems-aarch64-x86_64.patch -> patches/binutils-2.26-rtems-aarch64-x86_64.patch
+ downloading: patches/binutils-2.26-rtems-aarch64-x86_64.patch - 3.2kB of 3.2kB (100%)
+ building: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
+ reporting: tools/rtems-binutils-2.26-1.cfg -> sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1.txt
+ reporting: tools/rtems-binutils-2.26-1.cfg -> sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1.xml
+ config: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg
+ package: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
+ download: ftp://gcc.gnu.org/pub/gcc/snapshots/6-20160228/gcc-6-20160228.tar.bz2 -> sources/gcc-6-20160228.tar.bz2
+ downloading: sources/gcc-6-20160228.tar.bz2 - 90.8MB of 90.8MB (100%)
+ download: ftp://sourceware.org/pub/newlib/newlib-2.3.0.20160226.tar.gz -> sources/newlib-2.3.0.20160226.tar.gz
+ downloading: sources/newlib-2.3.0.20160226.tar.gz - 16.9MB of 16.9MB (100%)
+ download: http://www.mpfr.org/mpfr-2.4.2/mpfr-2.4.2.tar.bz2 ->
+ sources/mpfr-2.4.2.tar.bz2
+ downloading: sources/mpfr-2.4.2.tar.bz2 - 1.0MB of 1.0MB (100%)
+ download: http://www.multiprecision.org/mpc/download/mpc-0.8.1.tar.gz -> sources/mpc-0.8.1.tar.gz
+ downloading: sources/mpc-0.8.1.tar.gz - 532.2kB of 532.2kB (100%)
+ download: ftp://ftp.gnu.org/gnu/gmp/gmp-4.3.2.tar.bz2 -> sources/gmp-4.3.2.tar.bz2
+ downloading: sources/gmp-4.3.2.tar.bz2 - 1.8MB of 1.8MB (100%)
+ building: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
+ reporting: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg -> sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1.txt
+ reporting: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg -> sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1.xml
+ config: tools/rtems-gdb-7.9-1.cfg
+ package: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
+ download: http://ftp.gnu.org/gnu/gdb/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
+ downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
+ download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
+ downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
+ download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
+ downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
+ download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-7.9-aarch64-x86_64.patch -> patches/gdb-7.9-aarch64-x86_64.patch
+ downloading: patches/gdb-7.9-aarch64-x86_64.patch - 1.7kB of 1.7kB (100%)
+ building: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
+ reporting: tools/rtems-gdb-7.9-1.cfg -> sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1.txt
+ reporting: tools/rtems-gdb-7.9-1.cfg -> sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1.xml
+ config: tools/rtems-tools-4.12-1.cfg
+ package: rtems-tools-HEAD-1
+ Creating source directory: sources/git
+ git: clone: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
+ git: reset: git://git.rtems.org/rtems-tools.git
+ git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
+ git: checkout: git://git.rtems.org/rtems-tools.git => HEAD
+ git: pull: git://git.rtems.org/rtems-tools.git
+ building: rtems-tools-HEAD-1
+ reporting: tools/rtems-tools-4.12-1.cfg -> rtems-tools-HEAD-1.txt
+ reporting: tools/rtems-tools-4.12-1.cfg -> rtems-tools-HEAD-1.xml
+ installing: expat-2.1.0-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
+ installing: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
+ installing: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
+ installing: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
+ installing: rtems-tools-HEAD-1 -> /usr/home/chris/development/rtems/4.12
+ cleaning: expat-2.1.0-x86_64-linux-gnu-1
+ cleaning: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
+ cleaning: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
+ cleaning: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
+ cleaning: rtems-tools-HEAD-1
+ Build Set: Time 0:31:09.754219
+
+RTEMS Kernel
+~~~~~~~~~~~~
+
+We need to set our path to include the RTEMS tools we built in the previous
+section. The RTEMS tools needs to be first in your path because RTEMS provides
+specific versions of the ``autoconf`` and ``automake`` tools. We want to use
+the RTEMS version and not your host's versions:
+
+
+.. code-block:: shell
+
+ $ export PATH=$HOME/development/rtems/4.12/bin:$PATH
+
+Create a new location to build the RTEMS kernel:
+
+.. code-block:: shell
+
+ $ cd
+ $ cd development/rtems
+ $ mkdir kernel
+ $ cd kernel
+
+Clone the RTEMS respository:
+
+.. code-block:: shell
+
+ $ git clone git://git.rtems.org/rtems.git rtems
+ Cloning into 'rtems'...
+ remote: Counting objects: 483342, done.
+ remote: Compressing objects: 100% (88974/88974), done.
+ remote: Total 483342 (delta 390053), reused 475669 (delta 383809)
+ Receiving objects: 100% (483342/483342), 69.88 MiB | 1.37 MiB/s, done.
+ Resolving deltas: 100% (390053/390053), done.
+ Checking connectivity... done.
+
+The developers version of the code from git requires ``bootstrapping``. This is
+an ``autoconf`` and ``automake`` bootstrap to create the various files generated
+by ``autoconf`` and ``automake``. RTEMS does not keep these generated files
+under version control. The bootstrap process is slow so to speed it up the RSB
+provides a command that can perform the bootstrap in parallel using your
+available cores:
+
+.. code-block:: shell
+
+ $ ./bootstrap -c && ./bootstrap -p && \
+ $HOME/development/rtems/rsb/rsb/source-builder/sb-bootstrap
+ removing automake generated Makefile.in files
+ removing configure files
+ removing aclocal.m4 files
+ Generating ./cpukit/dtc/libfdt/preinstall.am
+ Generating ./cpukit/zlib/preinstall.am
+ Generating ./cpukit/libdl/preinstall.am
+ Generating ./cpukit/posix/preinstall.am
+ Generating ./cpukit/pppd/preinstall.am
+ Generating ./cpukit/librpc/preinstall.am
+ Generating ./cpukit/preinstall.am
+ Generating ./cpukit/sapi/preinstall.am
+ Generating ./cpukit/score/preinstall.am
+ Generating ./cpukit/score/cpu/mips/preinstall.am
+ Generating ./cpukit/score/cpu/sh/preinstall.am
+ Generating ./cpukit/score/cpu/sparc/preinstall.am
+ Generating ./cpukit/score/cpu/no_cpu/preinstall.am
+ Generating ./cpukit/score/cpu/arm/preinstall.am
+ Generating ./cpukit/score/cpu/m32c/preinstall.am
+ Generating ./cpukit/score/cpu/moxie/preinstall.am
+ Generating ./cpukit/score/cpu/v850/preinstall.am
+ Generating ./cpukit/score/cpu/sparc64/preinstall.am
+ Generating ./cpukit/score/cpu/or1k/preinstall.am
+ Generating ./cpukit/score/cpu/i386/preinstall.am
+ Generating ./cpukit/score/cpu/nios2/preinstall.am
+ Generating ./cpukit/score/cpu/epiphany/preinstall.am
+ Generating ./cpukit/score/cpu/m68k/preinstall.am
+ Generating ./cpukit/score/cpu/lm32/preinstall.am
+ Generating ./cpukit/score/cpu/powerpc/preinstall.am
+ Generating ./cpukit/score/cpu/bfin/preinstall.am
+ Generating ./cpukit/libpci/preinstall.am
+ Generating ./cpukit/libcrypt/preinstall.am
+ Generating ./cpukit/rtems/preinstall.am
+ Generating ./cpukit/telnetd/preinstall.am
+ Generating ./cpukit/libnetworking/preinstall.a
+ ......
+ Generating ./c/src/lib/libbsp/powerpc/gen5200/preinstall.am
+ Generating ./c/src/lib/libbsp/powerpc/mpc55xxevb/preinstall.am
+ Generating ./c/src/lib/libbsp/bfin/TLL6527M/preinstall.am
+ Generating ./c/src/lib/libbsp/bfin/bf537Stamp/preinstall.am
+ Generating ./c/src/lib/libbsp/bfin/eZKit533/preinstall.am
+ Generating ./c/src/librtems++/preinstall.am
+ Generating ./c/src/libchip/preinstall.am
+ Generating ./c/src/wrapup/preinstall.am
+ Generating ./c/src/ada/preinstall.am
+ RTEMS Source Builder - RTEMS Bootstrap, 4.12 (e645642255cc modified)
+ 1/139: autoreconf: configure.ac
+ 2/139: autoreconf: cpukit/configure.ac
+ 3/139: autoreconf: tools/cpu/configure.ac
+ 4/139: autoreconf: tools/cpu/generic/configure.ac
+ 5/139: autoreconf: tools/cpu/sh/configure.ac
+ 6/139: autoreconf: tools/cpu/nios2/configure.ac
+ 7/139: autoreconf: tools/build/configure.ac
+ 8/139: autoreconf: doc/configure.ac
+ ......
+ 124/139: autoreconf: c/src/make/configure.ac
+ 125/139: autoreconf: c/src/librtems++/configure.ac
+ 126/139: autoreconf: c/src/ada-tests/configure.ac
+ 127/139: autoreconf: testsuites/configure.ac
+ 128/139: autoreconf: testsuites/libtests/configure.ac
+ 129/139: autoreconf: testsuites/mptests/configure.ac
+ 130/139: autoreconf: testsuites/fstests/configure.ac
+ 131/139: autoreconf: testsuites/sptests/configure.ac
+ 132/139: autoreconf: testsuites/tmtests/configure.ac
+ 133/139: autoreconf: testsuites/smptests/configure.ac
+ 134/139: autoreconf: testsuites/tools/configure.ac
+ 135/139: autoreconf: testsuites/tools/generic/configure.ac
+ 136/139: autoreconf: testsuites/psxtests/configure.ac
+ 137/139: autoreconf: testsuites/psxtmtests/configure.ac
+ 138/139: autoreconf: testsuites/rhealstone/configure.ac
+ 139/139: autoreconf: testsuites/samples/configure.ac
+ Bootstrap time: 0:02:47.398824
+
+We build RTEMS in a directory outside of the source tree we have just cloned
+and ``bootstrapped``. You cannot build RTEMS while in the source tree. Lets
+create a suitable directory using the name of the BSP we are going to build:
+
+.. code-block:: shell
+
+ $ cd ..
+ $ mkdir erc32
+ $ cd erc32
+
+Configure RTEMS using the ``configure`` command. We use a full path to
+``configure`` so the object files built contain the absolute path of the source
+files. If you are source level debugging you will be able to access the source
+code to RTEMS from the debugger. We will build for the ``erc32`` BSP with POSIX
+enabled and the networking stack disabled:
+
+.. code-block:: shell
+
+ $ $HOME/development/rtems/kernel/rtems/configure --prefix=$HOME/development/rtems/4.12 \
+ --target=sparc-rtems4.12 --enable-rtemsbsp=erc32 --enable-posix \
+ --disable-networking
+ checking for gmake... no
+ checking for make... make
+ checking for RTEMS Version... 4.11.99.0
+ checking build system type... x86_64-pc-linux-gnu
+ checking host system type... x86_64-pc-linux-gnu
+ checking target system type... sparc-unknown-rtems4.12
+ checking for a BSD-compatible install... /usr/bin/install -c
+ checking whether build environment is sane... yes
+ checking for a thread-safe mkdir -p... /bin/mkdir -p
+ checking for gawk... no
+ checking for mawk... mawk
+ checking whether make sets $(MAKE)... yes
+ checking whether to enable maintainer-specific portions of Makefiles... no
+ checking that generated files are newer than configure... done
+ ......
+ checking target system type... sparc-unknown-rtems4.12
+ checking rtems target cpu... sparc
+ checking for a BSD-compatible install... /usr/bin/install -c
+ checking whether build environment is sane... yes
+ checking for sparc-rtems4.12-strip... sparc-rtems4.12-strip
+ checking for a thread-safe mkdir -p... /bin/mkdir -p
+ checking for gawk... no
+ checking for mawk... mawk
+ checking whether make sets $(MAKE)... yes
+ checking whether to enable maintainer-specific portions of Makefiles... no
+ checking that generated files are newer than configure... done
+ configure: creating ./config.status
+ config.status: creating Makefile
+
+ target architecture: sparc.
+ available BSPs: erc32.
+ 'make all' will build the following BSPs: erc32.
+ other BSPs can be built with 'make RTEMS_BSP="bsp1 bsp2 ..."'
+
+ config.status: creating Makefile
+
+Build RTEMS using two cores:
+
+.. code-block:: shell
+
+ $ make -j 2
+ Making all in tools/build
+ make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
+ make all-am
+ make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
+ gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT cklength.o -MD -MP -MF .deps/cklength.Tpo -c -o cklength.o /home/chris/development/rtems/kernel/rtems/tools/build/cklength.c
+ gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT eolstrip.o -MD -MP -MF .deps/eolstrip.Tpo -c -o eolstrip.o /home/chris/development/rtems/kernel/rtems/tools/build/eolstrip.c
+ mv -f .deps/cklength.Tpo .deps/cklength.Po
+ mv -f .deps/eolstrip.Tpo .deps/eolstrip.Po
+ gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT compat.o -MD -MP -MF .deps/compat.Tpo -c -o compat.o /home/chris/development/rtems/kernel/rtems/tools/build/compat.c
+ gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT packhex.o -MD -MP -MF .deps/packhex.Tpo -c -o packhex.o /home/chris/development/rtems/kernel/rtems/tools/build/packhex.c
+ mv -f .deps/compat.Tpo .deps/compat.Po
+ gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT unhex.o -MD -MP -MF .deps/unhex.Tpo -c -o unhex.o /home/chris/development/rtems/kernel/rtems/tools/build/unhex.c
+ mv -f .deps/packhex.Tpo .deps/packhex.Po
+ gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT rtems-bin2c.o -MD -MP -MF .deps/rtems-bin2c.Tpo -c -o rtems-bin2c.o /home/chris/development/rtems/kernel/rtems/tools/build/rtems-bin2c.c
+ mv -f .deps/unhex.Tpo .deps/unhex.Po
+ gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT binpatch.o -MD -MP -MF .deps/binpatch.Tpo -c -o binpatch.o /home/chris/development/rtems/kernel/rtems/tools/build/binpatch.c
+ mv -f .deps/rtems-bin2c.Tpo .deps/rtems-bin2c.Po
+ gcc -g -O2 -o cklength cklength.o
+ mv -f .deps/binpatch.Tpo .deps/binpatch.Po
+ gcc -g -O2 -o eolstrip eolstrip.o compat.o
+ gcc -g -O2 -o packhex packhex.o
+ gcc -g -O2 -o rtems-bin2c rtems-bin2c.o compat.o
+ gcc -g -O2 -o unhex unhex.o compat.o
+ gcc -g -O2 -o binpatch binpatch.o
+ make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
+ make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
+ Making all in tools/cpu
+ make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
+ Making all in generic
+ make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
+ make[2]: Nothing to be done for 'all'.
+ make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
+ make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
+ make[2]: Nothing to be done for 'all-am'.
+ make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
+ make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
+ Making all in testsuites/tools
+ make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
+ Making all in generic
+ make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools/generic'
+ make[2]: Nothing to be done for 'all'.
+ make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools/generic'
+ make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
+ make[2]: Nothing to be done for 'all-am'.
+ make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
+ make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
+ Making all in sparc-rtems4.12/c
+ make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
+ Making all in .
+ make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
+ Configuring RTEMS_BSP=erc32
+ checking for gmake... no
+ checking for make... make
+ checking build system type... x86_64-pc-linux-gnu
+ checking host system type... sparc-unknown-rtems4.12
+ ......
+ cp paranoia.exe paranoia.ralf
+ make[6]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites/samples/paranoia'
+ Making all in nsecs
+ make[6]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites/samples/nsecs'
+ sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs -I.. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/../support/include -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT init.o -MD -MP -MF .deps/init.Tpo -c -o init.o /home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs/init.c
+ sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs -I.. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/../support/include -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT empty.o -MD -MP -MF .deps/empty.Tpo -c -o empty.o /home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs/empty.c
+ mv -f .deps/empty.Tpo .deps/empty.Po
+ mv -f .deps/init.Tpo .deps/init.Po
+ sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -Wl,--gc-sections -mcpu=cypress -o nsecs.exe init.o empty.o
+ sparc-rtems4.12-nm -g -n nsecs.exe > nsecs.num
+ sparc-rtems4.12-size nsecs.exe
+ text data bss dec hex filename
+ 121392 1888 6624 129904 1fb70 nsecs.exe
+ cp nsecs.exe nsecs.ralf
+ make[6]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites/samples/nsecs'
+ make[5]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites/samples'
+ make[4]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites/samples'
+ make[4]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites'
+ make[4]: Nothing to be done for 'all-am'.
+ make[4]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites'
+ make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites'
+ make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32'
+ make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
+ make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32'
+ make[1]: Nothing to be done for 'all-am'.
+ make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32'
+
+All that remains to be done is to install the kernel. Installing RTEMS copies
+the API headers and architecture specific libraries to a locaiton under the
+`prefix` you provide. You can install any number of BSPs under the same
+`prefix`. We recommend you have a separate `prefix` for different versions of
+RTEMS. Do not mix versions of RTEMS under the same `prefix`. Make installs
+RTEMS with the following command:
+
+.. code-block:: shell
+
+ $ make install
+ Making install in tools/build
+ make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
+ make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
+ /bin/mkdir -p '/home/chris/development/rtems/4.12/bin'
+ /usr/bin/install -c cklength eolstrip packhex unhex rtems-bin2c '/home/chris/development/rtems/4.12/bin'
+ /bin/mkdir -p '/home/chris/development/rtems/4.12/bin'
+ /usr/bin/install -c install-if-change '/home/chris/development/rtems/4.12/bin'
+ make[2]: Nothing to be done for 'install-data-am'.
+ make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
+ make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
+ Making install in tools/cpu
+ make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
+ Making install in generic
+ make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
+ make[3]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
+ make[3]: Nothing to be done for 'install-exec-am'.
+ make[3]: Nothing to be done for 'install-data-am'.
+ make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
+ make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
+ make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
+ make[3]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
+ make[3]: Nothing to be done for 'install-exec-am'.
+ make[3]: Nothing to be done for 'install-data-am'.
+ make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
+ make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
+ make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu
+ ......
+ make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
+ make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32'
+ make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32'
+ make[2]: Nothing to be done for 'install-exec-am'.
+ /bin/mkdir -p '/home/chris/development/rtems/4.12/make'
+ /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/main.cfg /home/chris/development/rtems/kernel/rtems/make/leaf.cfg '/home/chris/development/rtems/4.12/make'
+ /bin/mkdir -p '/home/chris/development/rtems/4.12/share/rtems4.12/make/Templates'
+ /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.dir /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.leaf /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.lib '/home/chris/development/rtems/4.12/share/rtems4.12/make/Templates'
+ /bin/mkdir -p '/home/chris/development/rtems/4.12/make/custom'
+ /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/custom/default.cfg '/home/chris/development/rtems/4.12/make/custom'
+ make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32'
+ make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32'
+
+Contributing Patches
+~~~~~~~~~~~~~~~~~~~~
+
+RTEMS welcomes fixes to bugs and new features. The RTEMS Project likes to have
+bugs fixed against a ticket created on our :r:url:`devel`. Please raise a
+ticket if you have a bug. Any changes that are made can be tracked against the
+ticket. If you want to add a new a feature please post a message to
+:r:list:`devel` describing what you would like to implement. The RTEMS
+maintainer will help decide if the feature is in the best interest of the
+project. Not everything is and the maintainers need to evalulate how much
+effort it is to maintain the feature. Once accepted into the source tree it
+becomes the responsibility of the maintainers to keep the feature updated and
+working.
+
+Changes to the source tree are tracked using git. If you have not made changes
+and enter the source tree and enter a git status command you will see nothing
+has changed:
+
+.. code-block:: shell
+
+ $ cd ../rtems
+ $ git status
+ On branch master
+ Your branch is up-to-date with 'origin/master'.
+ nothing to commit, working directory clean
+
+We will make a change to the source code. In this example I change the help
+message to the RTEMS shell's ``halt`` command. Running the same git status
+command reports:
+
+.. code-block:: shell
+
+ $ git status
+ On branch master
+ Your branch is up-to-date with 'origin/master'.
+ Changes not staged for commit:
+ (use "git add <file>..." to update what will be committed)
+ (use "git checkout -- <file>..." to discard changes in working directory)
+
+ modified: cpukit/libmisc/shell/main_halt.c
+
+ no changes added to commit (use "git add" and/or "git commit -a")
+
+As an example I have a ticket open and the ticket number is 9876. I commit the
+change with the follow git command:
+
+.. code-block:: shell
+
+ $ git commit cpukit/libmisc/shell/main_halt.c
+
+An editor is opened and I enter my commit message. The first line is a title
+and the following lines form a body. My message is:
+
+.. code-block:: shell
+
+ shell: Add more help detail to the halt command.
+
+ Closes #9876.
+
+ # Please enter the commit message for your changes. Lines starting
+ # with '#' will be ignored, and an empty message aborts the commit.
+ # Explicit paths specified without -i or -o; assuming --only paths...
+ #
+ # Committer: Chris Johns <chrisj@rtems.org>
+ #
+ # On branch master
+ # Your branch is up-to-date with 'origin/master'.
+ #
+ # Changes to be committed:
+ # modified: cpukit/libmisc/shell/main_halt.c
+
+When you save and exit the editor git will report the commit's status:
+
+.. code-block:: shell
+
+ $ git commit cpukit/libmisc/shell/main_halt.c
+ [master 9f44dc9] shell: Add more help detail to the halt command.
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+You can either email the patch to :r:list:`devel` with the following git
+command:
+
+.. code-block:: shell
+
+ $ git send-email --to=devel@rtems.org -1
+ <add output here>
+
+Or you can ask git to create a patch file using:
+
+.. code-block:: shell
+
+ $ git format-patch -1
+ 0001-shell-Add-more-help-detail-to-the-halt-command.patch
+
+This patch can be attached to a ticket.
diff --git a/user/start/index.rst b/user/start/index.rst
index 1acb2bc..750f5b3 100644
--- a/user/start/index.rst
+++ b/user/start/index.rst
@@ -12,4 +12,3 @@ source.
.. include:: depend.rst
.. include:: installation.rst
-.. include:: windows.rst
diff --git a/user/start/installation.rst b/user/start/installation.rst
index a0229da..e687c4a 100644
--- a/user/start/installation.rst
+++ b/user/start/installation.rst
@@ -20,623 +20,11 @@ consistent user experience and on matching hardware the experience should feel
similar.
The RTEMS core development team uses POSIX type operating systems, that is
-Unix. The `Released Version`_ and `Development Version`_ sections assume
-Unix. Microsoft Windows is documented in a separate section
+Unix. The :ref:`released-version` and :ref:`development-version` sections
+assume Unix. Microsoft Windows is documented in a separate section
:ref:`microsoft-windows-installation`.
-Released Version
-----------------
-
-.. index:: Tarball
-
-XXX: Tarball
-
-Development Version
--------------------
-.. index:: Git
-
-RTEMS provides open access to it's development processes. The project encouages
-all users to inspect, review, comment and contribute to the code base. The
-processes described here are the same processes the core development team use
-when developing and maintaining RTEMS.
-
-.. warning::
-
- The development version is not for use in production and it can break from
- time to time.
-
-.. sidebar:: *GDB and Python*
-
- RTEMS uses Python in GDB to aid debugging which means GDB needs to be built
- with Python development libraries. Please check the RSB documentation and
- install the packages specified for your host. Make sure a python development
- package is included.
-
-The following procedure assumes you have installed and configured your host
-operating. It also assumes you have installed any dependent packages needed
-when building the tools and the kernel.
-
-You need to select a location to build and install the RTEMS Tool chain and
-RTEMS. Make sure there is plenty of disk space and a fast disk is
-recommended. Our procedure will document building and installing the tools in a
-home directory called :file:`development/rtems`. Using a home directory means
-you can do this without needing to be root. You can also use
-:file:`/opt/rtems/build` if you have access to that path.
-
-The location used to install the tools and kernel is called the `prefix`. It is
-best to have a `prefix` for each different version of RTEMS you are using. If
-you are using RTEMS 4.11 in production it is not a good to install a
-development version of 4.12 over the top. A separate `prefix` for each version
-avoids this.
-
-The RTEMS tool chain changes less often than the RTEMS kernel. One method of
-working with development releases is to have a separate `prefix` for the RTEMS
-tools and a different one for the RTEMS kernel. You can then update each
-without interacting with the other. You can also have a number of RTEMS
-versions available to test with.
-
-This procedure will build a SPARC tool chain.
-
-RTEMS Tools Chain
-~~~~~~~~~~~~~~~~~
-
-Clone the RTEMS Source Builder (RSB) repository:
-
-.. code-block:: shell
-
- $ cd
- $ mkdir -p development/rtems
- $ cd development/rtems
- $ git clone git://git.rtems.org/rtems-source-builder.git rsb
- Cloning into 'rsb'...
- remote: Counting objects: 5837, done.
- remote: Compressing objects: 100% (2304/2304), done.
- remote: Total 5837 (delta 4014), reused 5056 (delta 3494)
- Receiving objects: 100% (5837/5837), 2.48 MiB | 292.00 KiB/s, done.
- Resolving deltas: 100% (4014/4014), done.
- Checking connectivity... done.
-
-.. sidebar:: *Downloading the source*
-
- You need an internet connection to download the source. The downloaded source
- is cached locally and the RSB checksums it. If you run a build again the
- download output will be missing. Using the RSB from git will download the
- source from the upstream project's home site and this could be `http`, `ftp`,
- or `git`.
-
-Check all the host packages you need are present. Current libraries are not
-checked and this includes checking for the python development libraries GDB
-requires:
-
-.. code-block:: shell
-
- $ cd rsb
- $ ./source-builder/sb-check
- RTEMS Source Builder - Check, 4.12 (e645642255cc)
- Environment is ok
-
-Build a tool chain for the SPARC architecure. We are using the SPARC
-architecture because GDB has a good simulator that lets us run and test the
-samples RTEMS builds by default. The current development version
-is `4.12` and is on master:
-
-.. code-block:: shell
-
- $ cd rtems
- $ ../source-builder/sb-set-builder \
- --prefix=/usr/home/chris/development/rtems/4.12 4.12/rtems-sparc
- RTEMS Source Builder - Set Builder, 4.12 (e645642255cc)
- Build Set: 4.12/rtems-sparc
- Build Set: 4.12/rtems-autotools.bset
- Build Set: 4.12/rtems-autotools-internal.bset
- config: tools/rtems-autoconf-2.69-1.cfg
- package: autoconf-2.69-x86_64-linux-gnu-1
- Creating source directory: sources
- download: ftp://ftp.gnu.org/gnu/autoconf/autoconf-2.69.tar.gz -> sources/autoconf-2.69.tar.gz
- downloading: sources/autoconf-2.69.tar.gz - 1.8MB of 1.8MB (100%)
- building: autoconf-2.69-x86_64-linux-gnu-1
- config: tools/rtems-automake-1.12.6-1.cfg
- package: automake-1.12.6-x86_64-linux-gnu-1
- download: ftp://ftp.gnu.org/gnu/automake/automake-1.12.6.tar.gz -> sources/automake-1.12.6.tar.gz
- downloading: sources/automake-1.12.6.tar.gz - 2.0MB of 2.0MB (100%)
- Creating source directory: patches
- download: https://git.rtems.org/rtems-tools/plain/tools/4.12/automake/automake-1.12.6-bugzilla.redhat.com-1239379.diff -> patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff
- downloading: patches/automake-1.12.6-bugzilla.redhat.com-1239379.diff - 408.0 bytes of 408.0 bytes (100%)
- building: automake-1.12.6-x86_64-linux-gnu-1
- cleaning: autoconf-2.69-x86_64-linux-gnu-1
- cleaning: automake-1.12.6-x86_64-linux-gnu-1
- Build Set: Time 0:00:17.465024
- Build Set: 4.12/rtems-autotools-base.bset
- config: tools/rtems-autoconf-2.69-1.cfg
- package: autoconf-2.69-x86_64-linux-gnu-1
- building: autoconf-2.69-x86_64-linux-gnu-1
- reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.txt
- reporting: tools/rtems-autoconf-2.69-1.cfg -> autoconf-2.69-x86_64-linux-gnu-1.xml
- config: tools/rtems-automake-1.12.6-1.cfg
- package: automake-1.12.6-x86_64-linux-gnu-1
- building: automake-1.12.6-x86_64-linux-gnu-1
- reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.txt
- reporting: tools/rtems-automake-1.12.6-1.cfg -> automake-1.12.6-x86_64-linux-gnu-1.xml
- installing: autoconf-2.69-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- installing: automake-1.12.6-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- cleaning: autoconf-2.69-x86_64-linux-gnu-1
- cleaning: automake-1.12.6-x86_64-linux-gnu-1
- Build Set: Time 0:00:05.358624
- Build Set: Time 0:00:22.824422
- config: devel/expat-2.1.0-1.cfg
- package: expat-2.1.0-x86_64-linux-gnu-1
- download: http://downloads.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz -> sources/expat-2.1.0.tar.gz
- redirect: http://internode.dl.sourceforge.net/project/expat/expat/2.1.0/expat-2.1.0.tar.gz
- downloading: sources/expat-2.1.0.tar.gz - 549.4kB of 549.4kB (100%)
- building: expat-2.1.0-x86_64-linux-gnu-1
- reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.txt
- reporting: devel/expat-2.1.0-1.cfg -> expat-2.1.0-x86_64-linux-gnu-1.xml
- config: tools/rtems-binutils-2.26-1.cfg
- package: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
- download: ftp://ftp.gnu.org/gnu/binutils/binutils-2.26.tar.bz2 -> sources/binutils-2.26.tar.bz2
- downloading: sources/binutils-2.26.tar.bz2 - 24.4MB of 24.4MB (100%)
- download: https://git.rtems.org/rtems-tools/plain/tools/4.12/binutils/binutils-2.26-rtems-aarch64-x86_64.patch -> patches/binutils-2.26-rtems-aarch64-x86_64.patch
- downloading: patches/binutils-2.26-rtems-aarch64-x86_64.patch - 3.2kB of 3.2kB (100%)
- building: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
- reporting: tools/rtems-binutils-2.26-1.cfg -> sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1.txt
- reporting: tools/rtems-binutils-2.26-1.cfg -> sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1.xml
- config: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg
- package: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
- download: ftp://gcc.gnu.org/pub/gcc/snapshots/6-20160228/gcc-6-20160228.tar.bz2 -> sources/gcc-6-20160228.tar.bz2
- downloading: sources/gcc-6-20160228.tar.bz2 - 90.8MB of 90.8MB (100%)
- download: ftp://sourceware.org/pub/newlib/newlib-2.3.0.20160226.tar.gz -> sources/newlib-2.3.0.20160226.tar.gz
- downloading: sources/newlib-2.3.0.20160226.tar.gz - 16.9MB of 16.9MB (100%)
- download: http://www.mpfr.org/mpfr-2.4.2/mpfr-2.4.2.tar.bz2 ->
- sources/mpfr-2.4.2.tar.bz2
- downloading: sources/mpfr-2.4.2.tar.bz2 - 1.0MB of 1.0MB (100%)
- download: http://www.multiprecision.org/mpc/download/mpc-0.8.1.tar.gz -> sources/mpc-0.8.1.tar.gz
- downloading: sources/mpc-0.8.1.tar.gz - 532.2kB of 532.2kB (100%)
- download: ftp://ftp.gnu.org/gnu/gmp/gmp-4.3.2.tar.bz2 -> sources/gmp-4.3.2.tar.bz2
- downloading: sources/gmp-4.3.2.tar.bz2 - 1.8MB of 1.8MB (100%)
- building: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
- reporting: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg -> sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1.txt
- reporting: tools/rtems-gcc-6-20160228-newlib-2.3.0.20160226-1.cfg -> sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1.xml
- config: tools/rtems-gdb-7.9-1.cfg
- package: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
- download: http://ftp.gnu.org/gnu/gdb/gdb-7.9.tar.xz -> sources/gdb-7.9.tar.xz
- downloading: sources/gdb-7.9.tar.xz - 17.0MB of 17.0MB (100%)
- download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-sim-arange-inline.diff -> patches/gdb-sim-arange-inline.diff
- downloading: patches/gdb-sim-arange-inline.diff - 761.0 bytes of 761.0 bytes (100%)
- download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-sim-cgen-inline.diff -> patches/gdb-sim-cgen-inline.diff
- downloading: patches/gdb-sim-cgen-inline.diff - 706.0 bytes of 706.0 bytes (100%)
- download: https://git.rtems.org/rtems-tools/plain/tools/4.12/gdb/gdb-7.9-aarch64-x86_64.patch -> patches/gdb-7.9-aarch64-x86_64.patch
- downloading: patches/gdb-7.9-aarch64-x86_64.patch - 1.7kB of 1.7kB (100%)
- building: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
- reporting: tools/rtems-gdb-7.9-1.cfg -> sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1.txt
- reporting: tools/rtems-gdb-7.9-1.cfg -> sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1.xml
- config: tools/rtems-tools-4.12-1.cfg
- package: rtems-tools-HEAD-1
- Creating source directory: sources/git
- git: clone: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
- git: reset: git://git.rtems.org/rtems-tools.git
- git: fetch: git://git.rtems.org/rtems-tools.git -> sources/git/rtems-tools.git
- git: checkout: git://git.rtems.org/rtems-tools.git => HEAD
- git: pull: git://git.rtems.org/rtems-tools.git
- building: rtems-tools-HEAD-1
- reporting: tools/rtems-tools-4.12-1.cfg -> rtems-tools-HEAD-1.txt
- reporting: tools/rtems-tools-4.12-1.cfg -> rtems-tools-HEAD-1.xml
- installing: expat-2.1.0-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- installing: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- installing: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- installing: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1 -> /usr/home/chris/development/rtems/4.12
- installing: rtems-tools-HEAD-1 -> /usr/home/chris/development/rtems/4.12
- cleaning: expat-2.1.0-x86_64-linux-gnu-1
- cleaning: sparc-rtems4.12-binutils-2.26-x86_64-linux-gnu-1
- cleaning: sparc-rtems4.12-gcc-6-20160228-newlib-2.3.0.20160226-x86_64-linux-gnu-1
- cleaning: sparc-rtems4.12-gdb-7.9-x86_64-linux-gnu-1
- cleaning: rtems-tools-HEAD-1
- Build Set: Time 0:31:09.754219
-
-RTEMS Kernel
-~~~~~~~~~~~~
-
-We need to set our path to include the RTEMS tools we built in the previous
-section. The RTEMS tools needs to be first in your path because RTEMS provides
-specific versions of the ``autoconf`` and ``automake`` tools. We want to use
-the RTEMS version and not your host's versions:
-
-
-.. code-block:: shell
-
- $ export PATH=$HOME/development/rtems/4.12/bin:$PATH
-
-Create a new location to build the RTEMS kernel:
-
-.. code-block:: shell
-
- $ cd
- $ cd development/rtems
- $ mkdir kernel
- $ cd kernel
-
-Clone the RTEMS respository:
-
-.. code-block:: shell
-
- $ git clone git://git.rtems.org/rtems.git rtems
- Cloning into 'rtems'...
- remote: Counting objects: 483342, done.
- remote: Compressing objects: 100% (88974/88974), done.
- remote: Total 483342 (delta 390053), reused 475669 (delta 383809)
- Receiving objects: 100% (483342/483342), 69.88 MiB | 1.37 MiB/s, done.
- Resolving deltas: 100% (390053/390053), done.
- Checking connectivity... done.
-
-The developers version of the code from git requires ``bootstrapping``. This is
-an ``autoconf`` and ``automake`` bootstrap to create the various files generated
-by ``autoconf`` and ``automake``. RTEMS does not keep these generated files
-under version control. The bootstrap process is slow so to speed it up the RSB
-provides a command that can perform the bootstrap in parallel using your
-available cores:
-
-.. code-block:: shell
-
- $ ./bootstrap -c && ./bootstrap -p && \
- $HOME/development/rtems/rsb/rsb/source-builder/sb-bootstrap
- removing automake generated Makefile.in files
- removing configure files
- removing aclocal.m4 files
- Generating ./cpukit/dtc/libfdt/preinstall.am
- Generating ./cpukit/zlib/preinstall.am
- Generating ./cpukit/libdl/preinstall.am
- Generating ./cpukit/posix/preinstall.am
- Generating ./cpukit/pppd/preinstall.am
- Generating ./cpukit/librpc/preinstall.am
- Generating ./cpukit/preinstall.am
- Generating ./cpukit/sapi/preinstall.am
- Generating ./cpukit/score/preinstall.am
- Generating ./cpukit/score/cpu/mips/preinstall.am
- Generating ./cpukit/score/cpu/sh/preinstall.am
- Generating ./cpukit/score/cpu/sparc/preinstall.am
- Generating ./cpukit/score/cpu/no_cpu/preinstall.am
- Generating ./cpukit/score/cpu/arm/preinstall.am
- Generating ./cpukit/score/cpu/m32c/preinstall.am
- Generating ./cpukit/score/cpu/moxie/preinstall.am
- Generating ./cpukit/score/cpu/v850/preinstall.am
- Generating ./cpukit/score/cpu/sparc64/preinstall.am
- Generating ./cpukit/score/cpu/or1k/preinstall.am
- Generating ./cpukit/score/cpu/i386/preinstall.am
- Generating ./cpukit/score/cpu/nios2/preinstall.am
- Generating ./cpukit/score/cpu/epiphany/preinstall.am
- Generating ./cpukit/score/cpu/m68k/preinstall.am
- Generating ./cpukit/score/cpu/lm32/preinstall.am
- Generating ./cpukit/score/cpu/powerpc/preinstall.am
- Generating ./cpukit/score/cpu/bfin/preinstall.am
- Generating ./cpukit/libpci/preinstall.am
- Generating ./cpukit/libcrypt/preinstall.am
- Generating ./cpukit/rtems/preinstall.am
- Generating ./cpukit/telnetd/preinstall.am
- Generating ./cpukit/libnetworking/preinstall.a
- ......
- Generating ./c/src/lib/libbsp/powerpc/gen5200/preinstall.am
- Generating ./c/src/lib/libbsp/powerpc/mpc55xxevb/preinstall.am
- Generating ./c/src/lib/libbsp/bfin/TLL6527M/preinstall.am
- Generating ./c/src/lib/libbsp/bfin/bf537Stamp/preinstall.am
- Generating ./c/src/lib/libbsp/bfin/eZKit533/preinstall.am
- Generating ./c/src/librtems++/preinstall.am
- Generating ./c/src/libchip/preinstall.am
- Generating ./c/src/wrapup/preinstall.am
- Generating ./c/src/ada/preinstall.am
- RTEMS Source Builder - RTEMS Bootstrap, 4.12 (e645642255cc modified)
- 1/139: autoreconf: configure.ac
- 2/139: autoreconf: cpukit/configure.ac
- 3/139: autoreconf: tools/cpu/configure.ac
- 4/139: autoreconf: tools/cpu/generic/configure.ac
- 5/139: autoreconf: tools/cpu/sh/configure.ac
- 6/139: autoreconf: tools/cpu/nios2/configure.ac
- 7/139: autoreconf: tools/build/configure.ac
- 8/139: autoreconf: doc/configure.ac
- ......
- 124/139: autoreconf: c/src/make/configure.ac
- 125/139: autoreconf: c/src/librtems++/configure.ac
- 126/139: autoreconf: c/src/ada-tests/configure.ac
- 127/139: autoreconf: testsuites/configure.ac
- 128/139: autoreconf: testsuites/libtests/configure.ac
- 129/139: autoreconf: testsuites/mptests/configure.ac
- 130/139: autoreconf: testsuites/fstests/configure.ac
- 131/139: autoreconf: testsuites/sptests/configure.ac
- 132/139: autoreconf: testsuites/tmtests/configure.ac
- 133/139: autoreconf: testsuites/smptests/configure.ac
- 134/139: autoreconf: testsuites/tools/configure.ac
- 135/139: autoreconf: testsuites/tools/generic/configure.ac
- 136/139: autoreconf: testsuites/psxtests/configure.ac
- 137/139: autoreconf: testsuites/psxtmtests/configure.ac
- 138/139: autoreconf: testsuites/rhealstone/configure.ac
- 139/139: autoreconf: testsuites/samples/configure.ac
- Bootstrap time: 0:02:47.398824
-
-We build RTEMS in a directory outside of the source tree we have just cloned
-and ``bootstrapped``. You cannot build RTEMS while in the source tree. Lets
-create a suitable directory using the name of the BSP we are going to build:
-
-.. code-block:: shell
-
- $ cd ..
- $ mkdir erc32
- $ cd erc32
-
-Configure RTEMS using the ``configure`` command. We use a full path to
-``configure`` so the object files built contain the absolute path of the source
-files. If you are source level debugging you will be able to access the source
-code to RTEMS from the debugger. We will build for the ``erc32`` BSP with POSIX
-enabled and the networking stack disabled:
-
-.. code-block:: shell
-
- $ $HOME/development/rtems/kernel/rtems/configure --prefix=$HOME/development/rtems/4.12 \
- --target=sparc-rtems4.12 --enable-rtemsbsp=erc32 --enable-posix \
- --disable-networking
- checking for gmake... no
- checking for make... make
- checking for RTEMS Version... 4.11.99.0
- checking build system type... x86_64-pc-linux-gnu
- checking host system type... x86_64-pc-linux-gnu
- checking target system type... sparc-unknown-rtems4.12
- checking for a BSD-compatible install... /usr/bin/install -c
- checking whether build environment is sane... yes
- checking for a thread-safe mkdir -p... /bin/mkdir -p
- checking for gawk... no
- checking for mawk... mawk
- checking whether make sets $(MAKE)... yes
- checking whether to enable maintainer-specific portions of Makefiles... no
- checking that generated files are newer than configure... done
- ......
- checking target system type... sparc-unknown-rtems4.12
- checking rtems target cpu... sparc
- checking for a BSD-compatible install... /usr/bin/install -c
- checking whether build environment is sane... yes
- checking for sparc-rtems4.12-strip... sparc-rtems4.12-strip
- checking for a thread-safe mkdir -p... /bin/mkdir -p
- checking for gawk... no
- checking for mawk... mawk
- checking whether make sets $(MAKE)... yes
- checking whether to enable maintainer-specific portions of Makefiles... no
- checking that generated files are newer than configure... done
- configure: creating ./config.status
- config.status: creating Makefile
-
- target architecture: sparc.
- available BSPs: erc32.
- 'make all' will build the following BSPs: erc32.
- other BSPs can be built with 'make RTEMS_BSP="bsp1 bsp2 ..."'
-
- config.status: creating Makefile
-
-Build RTEMS using two cores:
-
-.. code-block:: shell
-
- $ make -j 2
- Making all in tools/build
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- make all-am
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT cklength.o -MD -MP -MF .deps/cklength.Tpo -c -o cklength.o /home/chris/development/rtems/kernel/rtems/tools/build/cklength.c
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT eolstrip.o -MD -MP -MF .deps/eolstrip.Tpo -c -o eolstrip.o /home/chris/development/rtems/kernel/rtems/tools/build/eolstrip.c
- mv -f .deps/cklength.Tpo .deps/cklength.Po
- mv -f .deps/eolstrip.Tpo .deps/eolstrip.Po
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT compat.o -MD -MP -MF .deps/compat.Tpo -c -o compat.o /home/chris/development/rtems/kernel/rtems/tools/build/compat.c
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT packhex.o -MD -MP -MF .deps/packhex.Tpo -c -o packhex.o /home/chris/development/rtems/kernel/rtems/tools/build/packhex.c
- mv -f .deps/compat.Tpo .deps/compat.Po
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT unhex.o -MD -MP -MF .deps/unhex.Tpo -c -o unhex.o /home/chris/development/rtems/kernel/rtems/tools/build/unhex.c
- mv -f .deps/packhex.Tpo .deps/packhex.Po
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT rtems-bin2c.o -MD -MP -MF .deps/rtems-bin2c.Tpo -c -o rtems-bin2c.o /home/chris/development/rtems/kernel/rtems/tools/build/rtems-bin2c.c
- mv -f .deps/unhex.Tpo .deps/unhex.Po
- gcc -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/tools/build -g -O2 -MT binpatch.o -MD -MP -MF .deps/binpatch.Tpo -c -o binpatch.o /home/chris/development/rtems/kernel/rtems/tools/build/binpatch.c
- mv -f .deps/rtems-bin2c.Tpo .deps/rtems-bin2c.Po
- gcc -g -O2 -o cklength cklength.o
- mv -f .deps/binpatch.Tpo .deps/binpatch.Po
- gcc -g -O2 -o eolstrip eolstrip.o compat.o
- gcc -g -O2 -o packhex packhex.o
- gcc -g -O2 -o rtems-bin2c rtems-bin2c.o compat.o
- gcc -g -O2 -o unhex unhex.o compat.o
- gcc -g -O2 -o binpatch binpatch.o
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- Making all in tools/cpu
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- Making all in generic
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[2]: Nothing to be done for 'all'.
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[2]: Nothing to be done for 'all-am'.
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- Making all in testsuites/tools
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
- Making all in generic
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools/generic'
- make[2]: Nothing to be done for 'all'.
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools/generic'
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
- make[2]: Nothing to be done for 'all-am'.
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/testsuites/tools'
- Making all in sparc-rtems4.12/c
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
- Making all in .
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
- Configuring RTEMS_BSP=erc32
- checking for gmake... no
- checking for make... make
- checking build system type... x86_64-pc-linux-gnu
- checking host system type... sparc-unknown-rtems4.12
- ......
- cp paranoia.exe paranoia.ralf
- make[6]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites/samples/paranoia'
- Making all in nsecs
- make[6]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites/samples/nsecs'
- sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs -I.. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/../support/include -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT init.o -MD -MP -MF .deps/init.Tpo -c -o init.o /home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs/init.c
- sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -DHAVE_CONFIG_H -I. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs -I.. -I/home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/../support/include -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -MT empty.o -MD -MP -MF .deps/empty.Tpo -c -o empty.o /home/chris/development/rtems/kernel/rtems/c/src/../../testsuites/samples/nsecs/empty.c
- mv -f .deps/empty.Tpo .deps/empty.Po
- mv -f .deps/init.Tpo .deps/init.Po
- sparc-rtems4.12-gcc -B../../../../../erc32/lib/ -specs bsp_specs -qrtems -mcpu=cypress -O2 -g -ffunction-sections -fdata-sections -Wall -Wmissing-prototypes -Wimplicit-function-declaration -Wstrict-prototypes -Wnested-externs -Wl,--gc-sections -mcpu=cypress -o nsecs.exe init.o empty.o
- sparc-rtems4.12-nm -g -n nsecs.exe > nsecs.num
- sparc-rtems4.12-size nsecs.exe
- text data bss dec hex filename
- 121392 1888 6624 129904 1fb70 nsecs.exe
- cp nsecs.exe nsecs.ralf
- make[6]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites/samples/nsecs'
- make[5]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites/samples'
- make[4]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites/samples'
- make[4]: Entering directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites'
- make[4]: Nothing to be done for 'all-am'.
- make[4]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites'
- make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32/testsuites'
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c/erc32'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32'
- make[1]: Nothing to be done for 'all-am'.
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32'
-
-All that remains to be done is to install the kernel. Installing RTEMS copies
-the API headers and architecture specific libraries to a locaiton under the
-`prefix` you provide. You can install any number of BSPs under the same
-`prefix`. We recommend you have a separate `prefix` for different versions of
-RTEMS. Do not mix versions of RTEMS under the same `prefix`. Make installs
-RTEMS with the following command:
-
-.. code-block:: shell
-
- $ make install
- Making install in tools/build
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- /bin/mkdir -p '/home/chris/development/rtems/4.12/bin'
- /usr/bin/install -c cklength eolstrip packhex unhex rtems-bin2c '/home/chris/development/rtems/4.12/bin'
- /bin/mkdir -p '/home/chris/development/rtems/4.12/bin'
- /usr/bin/install -c install-if-change '/home/chris/development/rtems/4.12/bin'
- make[2]: Nothing to be done for 'install-data-am'.
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/build'
- Making install in tools/cpu
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- Making install in generic
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[3]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[3]: Nothing to be done for 'install-exec-am'.
- make[3]: Nothing to be done for 'install-data-am'.
- make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu/generic'
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[3]: Entering directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[3]: Nothing to be done for 'install-exec-am'.
- make[3]: Nothing to be done for 'install-data-am'.
- make[3]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/tools/cpu
- ......
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32/sparc-rtems4.12/c'
- make[1]: Entering directory '/home/chris/development/rtems/kernel/erc32'
- make[2]: Entering directory '/home/chris/development/rtems/kernel/erc32'
- make[2]: Nothing to be done for 'install-exec-am'.
- /bin/mkdir -p '/home/chris/development/rtems/4.12/make'
- /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/main.cfg /home/chris/development/rtems/kernel/rtems/make/leaf.cfg '/home/chris/development/rtems/4.12/make'
- /bin/mkdir -p '/home/chris/development/rtems/4.12/share/rtems4.12/make/Templates'
- /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.dir /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.leaf /home/chris/development/rtems/kernel/rtems/make/Templates/Makefile.lib '/home/chris/development/rtems/4.12/share/rtems4.12/make/Templates'
- /bin/mkdir -p '/home/chris/development/rtems/4.12/make/custom'
- /usr/bin/install -c -m 644 /home/chris/development/rtems/kernel/rtems/make/custom/default.cfg '/home/chris/development/rtems/4.12/make/custom'
- make[2]: Leaving directory '/home/chris/development/rtems/kernel/erc32'
- make[1]: Leaving directory '/home/chris/development/rtems/kernel/erc32'
-
-Contributing Patches
-~~~~~~~~~~~~~~~~~~~~
-
-RTEMS welcomes fixes to bugs and new features. The RTEMS Project likes to have
-bugs fixed against a ticket created on our :r:url:`devel`. Please raise a
-ticket if you have a bug. Any changes that are made can be tracked against the
-ticket. If you want to add a new a feature please post a message to
-:r:list:`devel` describing what you would like to implement. The RTEMS
-maintainer will help decide if the feature is in the best interest of the
-project. Not everything is and the maintainers need to evalulate how much
-effort it is to maintain the feature. Once accepted into the source tree it
-becomes the responsibility of the maintainers to keep the feature updated and
-working.
-
-Changes to the source tree are tracked using git. If you have not made changes
-and enter the source tree and enter a git status command you will see nothing
-has changed:
-
-.. code-block:: shell
-
- $ cd ../rtems
- $ git status
- On branch master
- Your branch is up-to-date with 'origin/master'.
- nothing to commit, working directory clean
-
-We will make a change to the source code. In this example I change the help
-message to the RTEMS shell's ``halt`` command. Running the same git status
-command reports:
-
-.. code-block:: shell
-
- $ git status
- On branch master
- Your branch is up-to-date with 'origin/master'.
- Changes not staged for commit:
- (use "git add <file>..." to update what will be committed)
- (use "git checkout -- <file>..." to discard changes in working directory)
-
- modified: cpukit/libmisc/shell/main_halt.c
-
- no changes added to commit (use "git add" and/or "git commit -a")
-
-As an example I have a ticket open and the ticket number is 9876. I commit the
-change with the follow git command:
-
-.. code-block:: shell
-
- $ git commit cpukit/libmisc/shell/main_halt.c
-
-An editor is opened and I enter my commit message. The first line is a title
-and the following lines form a body. My message is:
-
-.. code-block:: shell
-
- shell: Add more help detail to the halt command.
-
- Closes #9876.
-
- # Please enter the commit message for your changes. Lines starting
- # with '#' will be ignored, and an empty message aborts the commit.
- # Explicit paths specified without -i or -o; assuming --only paths...
- #
- # Committer: Chris Johns <chrisj@rtems.org>
- #
- # On branch master
- # Your branch is up-to-date with 'origin/master'.
- #
- # Changes to be committed:
- # modified: cpukit/libmisc/shell/main_halt.c
-
-When you save and exit the editor git will report the commit's status:
-
-.. code-block:: shell
-
- $ git commit cpukit/libmisc/shell/main_halt.c
- [master 9f44dc9] shell: Add more help detail to the halt command.
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-You can either email the patch to :r:list:`devel` with the following git
-command:
-
-.. code-block:: shell
-
- $ git send-email --to=devel@rtems.org -1
- <add output here>
-
-Or you can ask git to create a patch file using:
-
-.. code-block:: shell
-
- $ git format-patch -1
- 0001-shell-Add-more-help-detail-to-the-halt-command.patch
-
-This patch can be attached to a ticket.
+.. comments: Include the various installation parts.
+.. include:: releases.rst
+.. include:: development.rst
+.. include:: windows.rst
diff --git a/user/start/releases.rst b/user/start/releases.rst
new file mode 100644
index 0000000..0a0f80b
--- /dev/null
+++ b/user/start/releases.rst
@@ -0,0 +1,11 @@
+.. comment: Copyright (c) 2016 Chris Johns <chrisj@rtems.org>
+.. comment: All rights reserved.
+
+.. _released-version:
+
+Released Version
+----------------
+
+.. index:: Tarball
+
+XXX: Tarball
diff --git a/user/start/windows.rst b/user/start/windows.rst
index 28f61c5..307e137 100644
--- a/user/start/windows.rst
+++ b/user/start/windows.rst
@@ -3,15 +3,15 @@
.. _microsoft-windows-installation:
-Microsoft Windows Installation
-==============================
+Microsoft Windows
+-----------------
.. index:: Microsoft Windows Installation
This section details how you create an RTEMS development environment on
Windows. The installation documented here is on `Windows 7 64bit Professional`.
-RTEMS Development on Windows
-----------------------------
+Developing on Windows
+~~~~~~~~~~~~~~~~~~~~~
RTEMS supports Windows as a development host and the tools for most
architectures are available. The RTEMS Project relies on the GNU tools for
@@ -53,7 +53,7 @@ application. The RTEMS built tools can handle much longer path lengths however
some of the GNU tools such as those in the ``binutils`` package cannot.
POSIX Support
--------------
+~~~~~~~~~~~~~
Building the RTEMS compilers, debugger, the RTEMS kernel and a number of other
3rd party packages requires a POSIX environment. On Windows you can use Cygwin
@@ -71,7 +71,7 @@ distribution and that is a welcome feature on Windows. You get a powerful tool
to manage your development environment on Windows.
Python
-------
+~~~~~~
We need Python to build the tools as the RSB is written in Python and we need
suitable Python libraries to link to GDB as RTEMS makes use of GDB's Python
@@ -95,7 +95,7 @@ and 3 of Python and it helps handle some of the long paths building GCC can
generate.
Installing MSYS2
-----------------
+~~~~~~~~~~~~~~~~
MSYS2 is installed on a new machine using the MSYS2 installer found on
https://msys2.github.io/. Please select the ``x86_64`` variant for 64bit
@@ -351,8 +351,8 @@ Install the packages using ``pacman``:
(73/74) installing texinfo [#####################] 100%
(74/74) installing unzip [#####################] 100%
-Building the RTEMS Tools
-------------------------
+Building the Tools
+~~~~~~~~~~~~~~~~~~
Create a workspace for RTEMS using the following shell command:
@@ -527,8 +527,8 @@ To build a set of RTEMS tools for the Intel ``i386`` architecture:
/c/opt/rtems/rsb/rtems
$
-Building the RTEMS Kernel
--------------------------
+Building the Kernel
+~~~~~~~~~~~~~~~~~~~
We can now build the RTEMS kernel using the RTEMS tools we have just
built. First we need to set the path to the tools:
@@ -780,8 +780,8 @@ Install the kernel to our prefix:
/c/opt/rtems/kernel/pc686
$
-Building the RTEMS BSD Library
-------------------------------
+Building the LibBSD
+~~~~~~~~~~~~~~~~~~~
The RTEMS BSD Library or libBSD as it is also know is a package of FreeBSD code
ported to RTEMS. It provides a number of advantanced services including a