path: root/cpu_supplement/intel_amd_x86.rst
diff options
authorAmar Takhar <>2016-01-16 20:13:02 -0500
committerAmar Takhar <>2016-05-02 20:51:23 -0400
commitd755cbd36f5b4410994bcd468aee983471ab7167 (patch)
tree5992533991f9fe7332d264afd61700ee6836e7e2 /cpu_supplement/intel_amd_x86.rst
parentc0e0c96ba5b4a93fa99ff2bd98813089e6951cf2 (diff)
Split document into seperate files by section.
Diffstat (limited to '')
1 files changed, 320 insertions, 0 deletions
diff --git a/cpu_supplement/intel_amd_x86.rst b/cpu_supplement/intel_amd_x86.rst
new file mode 100644
index 0000000..59db1cd
--- /dev/null
+++ b/cpu_supplement/intel_amd_x86.rst
@@ -0,0 +1,320 @@
+Intel/AMD x86 Specific Information
+This chapter discusses the Intel x86 architecture dependencies
+in this port of RTEMS. This family has multiple implementations
+from multiple vendors and suffers more from having evolved rather
+than being designed for growth.
+For information on the i386 processor, refer to the
+following documents:
+- *386 Programmer’s Reference Manual, Intel, Order No. 230985-002*.
+- *386 Microprocessor Hardware Reference Manual, Intel,
+ Order No. 231732-003*.
+- *80386 System Software Writer’s Guide, Intel, Order No. 231499-001*.
+- *80387 Programmer’s Reference Manual, Intel, Order No. 231917-001*.
+CPU Model Dependent Features
+This section presents the set of features which vary
+across i386 implementations and are of importance to RTEMS.
+The set of CPU model feature macros are defined in the file``cpukit/score/cpu/i386/i386.h`` based upon the particular CPU
+model specified on the compilation command line.
+bswap Instruction
+The macro ``I386_HAS_BSWAP`` is set to 1 to indicate that
+this CPU model has the ``bswap`` instruction which
+endian swaps a thirty-two bit quantity. This instruction
+appears to be present in all CPU models
+i486’s and above.
+Calling Conventions
+Processor Background
+The i386 architecture supports a simple yet effective
+call and return mechanism. A subroutine is invoked via the call
+(``call``) instruction. This instruction pushes the return address
+on the stack. The return from subroutine (``ret``) instruction pops
+the return address off the current stack and transfers control
+to that instruction. It is is important to note that the i386
+call and return mechanism does not automatically save or restore
+any registers. It is the responsibility of the high-level
+language compiler to define the register preservation and usage
+Calling Mechanism
+All RTEMS directives are invoked using a call instruction and return to
+the user application via the ret instruction.
+Register Usage
+As discussed above, the call instruction does not automatically save
+any registers. RTEMS uses the registers EAX, ECX, and EDX as scratch
+registers. These registers are not preserved by RTEMS directives
+therefore, the contents of these registers should not be assumed upon
+return from any RTEMS directive.
+Parameter Passing
+RTEMS assumes that arguments are placed on the
+current stack before the directive is invoked via the call
+instruction. The first argument is assumed to be closest to the
+return address on the stack. This means that the first argument
+of the C calling sequence is pushed last. The following
+pseudo-code illustrates the typical sequence used to call a
+RTEMS directive with three (3) arguments:
+.. code:: c
+ push third argument
+ push second argument
+ push first argument
+ invoke directive
+ remove arguments from the stack
+The arguments to RTEMS are typically pushed onto the
+stack using a push instruction. These arguments must be removed
+from the stack after control is returned to the caller. This
+removal is typically accomplished by adding the size of the
+argument list in bytes to the stack pointer.
+Memory Model
+Flat Memory Model
+RTEMS supports the i386 protected mode, flat memory
+model with paging disabled. In this mode, the i386
+automatically converts every address from a logical to a
+physical address each time it is used. The i386 uses
+information provided in the segment registers and the Global
+Descriptor Table to convert these addresses. RTEMS assumes the
+existence of the following segments:
+- a single code segment at protection level (0) which
+ contains all application and executive code.
+- a single data segment at protection level zero (0) which
+ contains all application and executive data.
+The i386 segment registers and associated selectors
+must be initialized when the initialize_executive directive is
+invoked. RTEMS treats the segment registers as system registers
+and does not modify or context switch them.
+This i386 memory model supports a flat 32-bit address
+space with addresses ranging from 0x00000000 to 0xFFFFFFFF (4
+gigabytes). Each address is represented by a 32-bit value and
+is byte addressable. The address may be used to reference a
+single byte, half-word (2-bytes), or word (4 bytes).
+Interrupt Processing
+Although RTEMS hides many of the processor
+dependent details of interrupt processing, it is important to
+understand how the RTEMS interrupt manager is mapped onto the
+processor’s unique architecture. Discussed in this chapter are
+the the processor’s response and control mechanisms as they
+pertain to RTEMS.
+Vectoring of Interrupt Handler
+Although the i386 supports multiple privilege levels,
+RTEMS and all user software executes at privilege level 0. This
+decision was made by the RTEMS designers to enhance
+compatibility with processors which do not provide sophisticated
+protection facilities like those of the i386. This decision
+greatly simplifies the discussion of i386 processing, as one
+need only consider interrupts without privilege transitions.
+Upon receipt of an interrupt the i386 automatically
+performs the following actions:
+- pushes the EFLAGS register
+- pushes the far address of the interrupted instruction
+- vectors to the interrupt service routine (ISR).
+A nested interrupt is processed similarly by the
+Interrupt Stack Frame
+The structure of the Interrupt Stack Frame for the
+i386 which is placed on the interrupt stack by the processor in
+response to an interrupt is as follows:
+| Old EFLAGS Register | ESP+8 |
+| UNUSED | Old CS | ESP+4 |
+| Old EIP | ESP |
+Interrupt Levels
+Although RTEMS supports 256 interrupt levels, the
+i386 only supports two – enabled and disabled. Interrupts are
+enabled when the interrupt-enable flag (IF) in the extended
+flags (EFLAGS) is set. Conversely, interrupt processing is
+inhibited when the IF is cleared. During a non-maskable
+interrupt, all other interrupts, including other non-maskable
+ones, are inhibited.
+RTEMS interrupt levels 0 and 1 such that level zero
+(0) indicates that interrupts are fully enabled and level one
+that interrupts are disabled. All other RTEMS interrupt levels
+are undefined and their behavior is unpredictable.
+Interrupt Stack
+The i386 family does not support a dedicated hardware
+interrupt stack. On this processor, RTEMS allocates and manages
+a dedicated interrupt stack. As part of vectoring a non-nested
+interrupt service routine, RTEMS switches from the stack of the
+interrupted task to a dedicated interrupt stack. When a
+non-nested interrupt returns, RTEMS switches back to the stack
+of the interrupted stack. The current stack pointer is not
+altered by RTEMS on nested interrupt.
+Default Fatal Error Processing
+The default fatal error handler for this architecture disables processor
+interrupts, places the error code in EAX, and executes a HLT instruction
+to halt the processor.
+Symmetric Multiprocessing
+SMP is not supported.
+Thread-Local Storage
+Thread-local storage is not implemented.
+Board Support Packages
+System Reset
+An RTEMS based application is initiated when the i386 processor is reset.
+When the i386 is reset,
+- The EAX register is set to indicate the results of the processor’s
+ power-up self test. If the self-test was not executed, the contents of
+ this register are undefined. Otherwise, a non-zero value indicates the
+ processor is faulty and a zero value indicates a successful self-test.
+- The DX register holds a component identifier and revision level. DH
+ contains 3 to indicate an i386 component and DL contains a unique revision
+ level indicator.
+- Control register zero (CR0) is set such that the processor is in real
+ mode with paging disabled. Other portions of CR0 are used to indicate the
+ presence of a numeric coprocessor.
+- All bits in the extended flags register (EFLAG) which are not
+ permanently set are cleared. This inhibits all maskable interrupts.
+- The Interrupt Descriptor Register (IDTR) is set to point at address
+ zero.
+- All segment registers are set to zero.
+- The instruction pointer is set to 0x0000FFF0. The first instruction
+ executed after a reset is actually at 0xFFFFFFF0 because the i386 asserts
+ the upper twelve address until the first intersegment (FAR) JMP or CALL
+ instruction. When a JMP or CALL is executed, the upper twelve address
+ lines are lowered and the processor begins executing in the first megabyte
+ of memory.
+Typically, an intersegment JMP to the application’s initialization code is
+placed at address 0xFFFFFFF0.
+Processor Initialization
+This initialization code is responsible for initializing all data
+structures required by the i386 in protected mode and for actually entering
+protected mode. The i386 must be placed in protected mode and the segment
+registers and associated selectors must be initialized before the
+initialize_executive directive is invoked.
+The initialization code is responsible for initializing the Global
+Descriptor Table such that the i386 is in the thirty-two bit flat memory
+model with paging disabled. In this mode, the i386 automatically converts
+every address from a logical to a physical address each time it is used.
+For more information on the memory model used by RTEMS, please refer to the
+Memory Model chapter in this document.
+Since the processor is in real mode upon reset, the processor must be
+switched to protected mode before RTEMS can execute. Before switching to
+protected mode, at least one descriptor table and two descriptors must be
+created. Descriptors are needed for a code segment and a data segment. (
+This will give you the flat memory model.) The stack can be placed in a
+normal read/write data segment, so no descriptor for the stack is needed.
+Before the GDT can be used, the base address and limit must be loaded into
+the GDTR register using an LGDT instruction.
+If the hardware allows an NMI to be generated, you need to create the IDT
+and a gate for the NMI interrupt handler. Before the IDT can be used, the
+base address and limit for the idt must be loaded into the IDTR register
+using an LIDT instruction.
+Protected mode is entered by setting thye PE bit in the CR0 register.
+Either a LMSW or MOV CR0 instruction may be used to set this bit. Because
+the processor overlaps the interpretation of several instructions, it is
+necessary to discard the instructions from the read-ahead cache. A JMP
+instruction immediately after the LMSW changes the flow and empties the
+processor if intructions which have been pre-fetched and/or decoded. At
+this point, the processor is in protected mode and begins to perform
+protected mode application initialization.
+If the application requires that the IDTR be some value besides zero, then
+it should set it to the required value at this point. All tasks share the
+same i386 IDTR value. Because interrupts are enabled automatically by
+RTEMS as part of the initialize_executive directive, the IDTR MUST be set
+properly before this directive is invoked to insure correct interrupt
+vectoring. If processor caching is to be utilized, then it should be
+enabled during the reset application initialization code. The reset code
+which is executed before the call to initialize_executive has the following
+For more information regarding the i386 data structures and their
+contents, refer to Intel’s 386 Programmer’s Reference Manual.
+.. COMMENT: COPYRIGHT (c) 1988-2002.
+.. COMMENT: On-Line Applications Research Corporation (OAR).
+.. COMMENT: All rights reserved.
+.. COMMENT: Jukka Pietarinen <>, 2008,
+.. COMMENT: Micro-Research Finland Oy