blob: 9812d5c5f269e6ed4cc1141e202fc9641969117f (plain
.. comment SPDX-License-Identifier: CC-BY-SA-4.0
.. Copyright (C) 1988, 2002 On-Line Applications Research Corporation (OAR)
Epiphany Specific Information
This chapter discusses the`Epiphany Architecture
http://adapteva.com/docs/epiphany_sdk_ref.pdf dependencies in this port of
RTEMS. Epiphany is a chip that can come with 16 and 64 cores, each of which can
run RTEMS separately or they can work together to run a SMP RTEMS application.
For information on the Epiphany architecture refer to the *Epiphany
Architecture Reference* http://adapteva.com/docs/epiphany_arch_ref.pdf.
Please refer to the *Epiphany SDK*
http://adapteva.com/docs/epiphany_sdk_ref.pdf Appendix A: Application Binary
Floating Point Unit
A floating point unit is currently not supported.
A flat 32-bit memory model is supported, no caches. Each core has its own 32
KiB strictly ordered local memory along with an access to a shared 32 MiB
Every Epiphany core has 10 exception types:
- Software Exception
- Data Page Fault
- Timer 0
- Timer 1
- Message Interrupt
- DMA0 Interrupt
- DMA1 Interrupt
- WANT Interrupt
- User Interrupt
There are only two levels: interrupts enabled and interrupts disabled.
The Epiphany RTEMS port uses a dedicated software interrupt stack. The stack
for interrupts is allocated during interrupt driver initialization. When an
interrupt is entered, the _ISR_Handler routine is responsible for switching
from the interrupted task stack to RTEMS software interrupt stack.
Default Fatal Error Processing
The default fatal error handler for this architecture performs the following
- disables operating system supported interrupts (IRQ),
- places the error code in ``r0``, and
- executes an infinite loop to simulate a halt processor instruction.
SMP is not supported.