diff options
Diffstat (limited to 'ncurses-5.3/doc/html/man/curs_terminfo.3x.html')
-rw-r--r-- | ncurses-5.3/doc/html/man/curs_terminfo.3x.html | 334 |
1 files changed, 334 insertions, 0 deletions
diff --git a/ncurses-5.3/doc/html/man/curs_terminfo.3x.html b/ncurses-5.3/doc/html/man/curs_terminfo.3x.html new file mode 100644 index 0000000..4163fbb --- /dev/null +++ b/ncurses-5.3/doc/html/man/curs_terminfo.3x.html @@ -0,0 +1,334 @@ +<!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> +<!-- + **************************************************************************** + * Copyright (c) 1999-2000,2002 Free Software Foundation, Inc. * + * * + * Permission is hereby granted, free of charge, to any person obtaining a * + * copy of this software and associated documentation files (the * + * "Software"), to deal in the Software without restriction, including * + * without limitation the rights to use, copy, modify, merge, publish, * + * distribute, distribute with modifications, sublicense, and/or sell * + * copies of the Software, and to permit persons to whom the Software is * + * furnished to do so, subject to the following conditions: * + * * + * The above copyright notice and this permission notice shall be included * + * in all copies or substantial portions of the Software. * + * * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * + * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. * + * IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, * + * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR * + * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR * + * THE USE OR OTHER DEALINGS IN THE SOFTWARE. * + * * + * Except as contained in this notice, the name(s) of the above copyright * + * holders shall not be used in advertising or otherwise to promote the * + * sale, use or other dealings in this Software without prior written * + * authorization. * + **************************************************************************** + * @Id: curs_terminfo.3x,v 1.16 2002/07/20 16:05:19 tom Exp @ +--> +<HTML> +<HEAD> +<TITLE>curs_terminfo 3x</TITLE> +<link rev=made href="mailto:bug-ncurses@gnu.org"> +<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1"> +</HEAD> +<BODY> +<H1>curs_terminfo 3x</H1> +<HR> +<PRE> +<!-- Manpage converted by man2html 3.0.1 --> + +</PRE> +<H2>NAME</H2><PRE> + <STRONG>del_curterm</STRONG>, <STRONG>mvcur</STRONG>, <STRONG>putp</STRONG>, <STRONG>restartterm</STRONG>, <STRONG>set_curterm</STRONG>, <STRONG>set-</STRONG> + <STRONG>term</STRONG>, <STRONG>setupterm</STRONG>, <STRONG>tigetflag</STRONG>, <STRONG>tigetnum</STRONG>, <STRONG>tigetstr</STRONG>, <STRONG>tparm</STRONG>, + <STRONG>tputs</STRONG>, <STRONG>vid_attr</STRONG>, <STRONG>vid_puts</STRONG>, <STRONG>vidattr</STRONG>, <STRONG>vidputs</STRONG> - <STRONG>curses</STRONG> + interfaces to terminfo database + + +</PRE> +<H2>SYNOPSIS</H2><PRE> + <STRONG>#include</STRONG> <STRONG><curses.h></STRONG> + <STRONG>#include</STRONG> <STRONG><term.h></STRONG> + + <STRONG>int</STRONG> <STRONG>setupterm(char</STRONG> <STRONG>*</STRONG><EM>term</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>fildes</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>*</STRONG><EM>errret</EM><STRONG>);</STRONG> + <STRONG>int</STRONG> <STRONG>setterm(char</STRONG> <STRONG>*</STRONG><EM>term</EM><STRONG>);</STRONG> + <STRONG>TERMINAL</STRONG> <STRONG>*set_curterm(TERMINAL</STRONG> <STRONG>*</STRONG><EM>nterm</EM><STRONG>);</STRONG> + <STRONG>int</STRONG> <STRONG>del_curterm(TERMINAL</STRONG> <STRONG>*</STRONG><EM>oterm</EM><STRONG>);</STRONG> + <STRONG>int</STRONG> <STRONG>restartterm(const</STRONG> <STRONG>char</STRONG> <STRONG>*</STRONG><EM>term</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>fildes</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>*</STRONG><EM>errret</EM><STRONG>);</STRONG> + <STRONG>char</STRONG> <STRONG>*tparm(char</STRONG> <STRONG>*</STRONG><EM>str</EM><STRONG>,</STRONG> <STRONG>...);</STRONG> + <STRONG>int</STRONG> <STRONG>tputs(const</STRONG> <STRONG>char</STRONG> <STRONG>*</STRONG><EM>str</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>affcnt</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>(*</STRONG><EM>putc</EM><STRONG>)(int));</STRONG> + <STRONG>int</STRONG> <STRONG>putp(const</STRONG> <STRONG>char</STRONG> <STRONG>*</STRONG><EM>str</EM><STRONG>);</STRONG> + <STRONG>int</STRONG> <STRONG>vidputs(chtype</STRONG> <EM>attrs</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>(*</STRONG><EM>putc</EM><STRONG>)(int));</STRONG> + <STRONG>int</STRONG> <STRONG>vidattr(chtype</STRONG> <EM>attrs</EM><STRONG>);</STRONG> + <STRONG>int</STRONG> <STRONG>vid_puts(attr_t</STRONG> <EM>attrs</EM><STRONG>,</STRONG> <STRONG>short</STRONG> <EM>pair</EM><STRONG>,</STRONG> <STRONG>void</STRONG> <STRONG>*</STRONG><EM>opts</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <STRONG>(*</STRONG><EM>putc</EM><STRONG>)(char));</STRONG> + <STRONG>int</STRONG> <STRONG>vid_attr(attr_t</STRONG> <EM>attrs</EM><STRONG>,</STRONG> <STRONG>short</STRONG> <EM>pair</EM><STRONG>,</STRONG> <STRONG>void</STRONG> <STRONG>*</STRONG><EM>opts</EM><STRONG>);</STRONG> + <STRONG>int</STRONG> <STRONG>mvcur(int</STRONG> <EM>oldrow</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>oldcol</EM><STRONG>,</STRONG> <STRONG>int</STRONG> <EM>newrow</EM>, int <EM>newcol</EM><STRONG>);</STRONG> + <STRONG>int</STRONG> <STRONG>tigetflag(char</STRONG> <STRONG>*</STRONG><EM>capname</EM><STRONG>);</STRONG> + <STRONG>int</STRONG> <STRONG>tigetnum(char</STRONG> <STRONG>*</STRONG><EM>capname</EM><STRONG>);</STRONG> + <STRONG>char</STRONG> <STRONG>*tigetstr(char</STRONG> <STRONG>*</STRONG><EM>capname</EM><STRONG>);</STRONG> + + +</PRE> +<H2>DESCRIPTION</H2><PRE> + These low-level routines must be called by programs that + have to deal directly with the <STRONG>terminfo</STRONG> database to handle + certain terminal capabilities, such as programming func- + tion keys. For all other functionality, <STRONG>curses</STRONG> routines + are more suitable and their use is recommended. + + Initially, <STRONG>setupterm</STRONG> should be called. Note that + <STRONG>setupterm</STRONG> is automatically called by <STRONG>initscr</STRONG> and <STRONG>newterm</STRONG>. + This defines the set of terminal-dependent variables + [listed in <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>]. The <STRONG>terminfo</STRONG> variables <STRONG>lines</STRONG> and + <STRONG>columns</STRONG> are initialized by <STRONG>setupterm</STRONG> as follows: If + <STRONG>use_env(FALSE)</STRONG> has been called, values for <STRONG>lines</STRONG> and + <STRONG>columns</STRONG> specified in <STRONG>terminfo</STRONG> are used. Otherwise, if the + environment variables <STRONG>LINES</STRONG> and <STRONG>COLUMNS</STRONG> exist, their val- + ues are used. If these environment variables do not exist + and the program is running in a window, the current window + size is used. Otherwise, if the environment variables do + not exist, the values for <STRONG>lines</STRONG> and <STRONG>columns</STRONG> specified in + the <STRONG>terminfo</STRONG> database are used. + + The header files <STRONG>curses.h</STRONG> and <STRONG>term.h</STRONG> should be included + (in this order) to get the definitions for these strings, + numbers, and flags. Parameterized strings should be + passed through <STRONG>tparm</STRONG> to instantiate them. All <STRONG>terminfo</STRONG> + strings [including the output of <STRONG>tparm</STRONG>] should be printed + with <STRONG>tputs</STRONG> or <STRONG>putp</STRONG>. Call the <STRONG>reset_shell_mode</STRONG> to restore + the tty modes before exiting [see <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>]. Pro- + grams which use cursor addressing should output + <STRONG>enter_ca_mode</STRONG> upon startup and should output <STRONG>exit_ca_mode</STRONG> + before exiting. Programs desiring shell escapes should + call + + <STRONG>reset_shell_mode</STRONG> and output <STRONG>exit_ca_mode</STRONG> before the shell + is called and should output <STRONG>enter_ca_mode</STRONG> and call + <STRONG>reset_prog_mode</STRONG> after returning from the shell. + + The <STRONG>setupterm</STRONG> routine reads in the <STRONG>terminfo</STRONG> database, ini- + tializing the <STRONG>terminfo</STRONG> structures, but does not set up the + output virtualization structures used by <STRONG>curses</STRONG>. The ter- + minal type is the character string <EM>term</EM>; if <EM>term</EM> is null, + the environment variable <STRONG>TERM</STRONG> is used. All output is to + file descriptor <STRONG>fildes</STRONG> which is initialized for output. + If <EM>errret</EM> is not null, then <STRONG>setupterm</STRONG> returns <STRONG>OK</STRONG> or <STRONG>ERR</STRONG> + and stores a status value in the integer pointed to by + <EM>errret</EM>. A return value of <STRONG>OK</STRONG> combined with status of <STRONG>1</STRONG> in + <EM>errret</EM> is normal. If <STRONG>ERR</STRONG> is returned, examine <EM>errret</EM>: + + <STRONG>1</STRONG> means that the terminal is hardcopy, cannot be + used for curses applications. + + <STRONG>0</STRONG> means that the terminal could not be found, or + that it is a generic type, having too little + information for curses applications to run. + + <STRONG>-1</STRONG> means that the <STRONG>terminfo</STRONG> database could not be + found. + + If <EM>errret</EM> is null, <STRONG>setupterm</STRONG> prints an error message upon + finding an error and exits. Thus, the simplest call is: + + <STRONG>setupterm((char</STRONG> <STRONG>*)0,</STRONG> <STRONG>1,</STRONG> <STRONG>(int</STRONG> <STRONG>*)0);</STRONG>, + + which uses all the defaults and sends the output to <STRONG>std-</STRONG> + <STRONG>out</STRONG>. + + The <STRONG>setterm</STRONG> routine is being replaced by <STRONG>setupterm</STRONG>. The + call: + + <STRONG>setupterm(</STRONG><EM>term</EM><STRONG>,</STRONG> <STRONG>1,</STRONG> <STRONG>(int</STRONG> <STRONG>*)0)</STRONG> + + provides the same functionality as <STRONG>setterm(</STRONG><EM>term</EM><STRONG>)</STRONG>. The + <STRONG>setterm</STRONG> routine is included here for BSD compatibility, + and is not recommended for new programs. + + The <STRONG>set_curterm</STRONG> routine sets the variable <STRONG>cur_term</STRONG> to + <EM>nterm</EM>, and makes all of the <STRONG>terminfo</STRONG> boolean, numeric, and + string variables use the values from <EM>nterm</EM>. It returns + the old value of <STRONG>cur_term</STRONG>. + + The <STRONG>del_curterm</STRONG> routine frees the space pointed to by + <EM>oterm</EM> and makes it available for further use. If <EM>oterm</EM> is + the same as <STRONG>cur_term</STRONG>, references to any of the <STRONG>terminfo</STRONG> + boolean, numeric, and string variables thereafter may + refer to invalid memory locations until another <STRONG>setupterm</STRONG> + has been called. + + The <STRONG>restartterm</STRONG> routine is similar to <STRONG>setupterm</STRONG> and + <STRONG>initscr</STRONG>, except that it is called after restoring memory + to a previous state (for example, when reloading a game + saved as a core image dump). It assumes that the windows + and the input and output options are the same as when mem- + ory was saved, but the terminal type and baud rate may be + different. Accordingly, it saves various tty state bits, + does a setupterm, and then restores the bits. + + The <STRONG>tparm</STRONG> routine instantiates the string <EM>str</EM> with parame- + ters <EM>pi</EM>. A pointer is returned to the result of <EM>str</EM> with + the parameters applied. + + The <STRONG>tputs</STRONG> routine applies padding information to the + string <EM>str</EM> and outputs it. The <EM>str</EM> must be a terminfo + string variable or the return value from <STRONG>tparm</STRONG>, <STRONG>tgetstr</STRONG>, + or <STRONG>tgoto</STRONG>. <EM>affcnt</EM> is the number of lines affected, or 1 if + not applicable. <EM>putc</EM> is a <STRONG>putchar</STRONG>-like routine to which + the characters are passed, one at a time. + + The <STRONG>putp</STRONG> routine calls <STRONG>tputs(</STRONG><EM>str</EM><STRONG>,</STRONG> <STRONG>1,</STRONG> <STRONG>putchar)</STRONG>. Note that + the output of <STRONG>putp</STRONG> always goes to <STRONG>stdout</STRONG>, not to the + <EM>fildes</EM> specified in <STRONG>setupterm</STRONG>. + + The <STRONG>vidputs</STRONG> routine displays the string on the terminal in + the video attribute mode <EM>attrs</EM>, which is any combination + of the attributes listed in <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>. The characters + are passed to the <STRONG>putchar</STRONG>-like routine <EM>putc</EM>. + + The <STRONG>vidattr</STRONG> routine is like the <STRONG>vidputs</STRONG> routine, except + that it outputs through <STRONG>putchar</STRONG>. + + The <STRONG>vid_attr</STRONG> and <STRONG>vid_puts</STRONG> routines correspond to vidattr + and vidputs, respectively. They use a set of arguments + for representing the video attributes plus color, i.e., + one of type attr_t for the attributes and one of short for + the color_pair number. The <STRONG>vid_attr</STRONG> and <STRONG>vid_puts</STRONG> routines + are designed to use the attribute constants with the <EM>WA</EM><STRONG>_</STRONG> + prefix. The opts argument is reserved for future use. + Currently, applications must provide a null pointer for + that argument. + + The <STRONG>mvcur</STRONG> routine provides low-level cursor motion. It + takes effect immediately (rather than at the next + refresh). + + The <STRONG>tigetflag</STRONG>, <STRONG>tigetnum</STRONG> and <STRONG>tigetstr</STRONG> routines return the + value of the capability corresponding to the <STRONG>terminfo</STRONG> + <EM>capname</EM> passed to them, such as <STRONG>xenl</STRONG>. + + The <STRONG>tigetflag</STRONG> routine returns the value <STRONG>-1</STRONG> if <EM>capname</EM> is + not a boolean capability, or <STRONG>0</STRONG> if it is canceled or absent + from the terminal description. + + The <STRONG>tigetnum</STRONG> routine returns the value <STRONG>-2</STRONG> if <EM>capname</EM> is + not a numeric capability, or <STRONG>-1</STRONG> if it is canceled or + absent from the terminal description. + + The <STRONG>tigetstr</STRONG> routine returns the value <STRONG>(char</STRONG> <STRONG>*)-1</STRONG> if <EM>cap-</EM> + <EM>name</EM> is not a string capability, or <STRONG>0</STRONG> if it is canceled or + absent from the terminal description. + + The <EM>capname</EM> for each capability is given in the table col- + umn entitled <EM>capname</EM> code in the capabilities section of + <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG>. + + <STRONG>char</STRONG> <STRONG>*boolnames</STRONG>, <STRONG>*boolcodes</STRONG>, <STRONG>*boolfnames</STRONG> + + <STRONG>char</STRONG> <STRONG>*numnames</STRONG>, <STRONG>*numcodes</STRONG>, <STRONG>*numfnames</STRONG> + + <STRONG>char</STRONG> <STRONG>*strnames</STRONG>, <STRONG>*strcodes</STRONG>, <STRONG>*strfnames</STRONG> + + These null-terminated arrays contain the <EM>capnames</EM>, the + <STRONG>termcap</STRONG> codes, and the full C names, for each of the <STRONG>ter-</STRONG> + <STRONG>minfo</STRONG> variables. + + +</PRE> +<H2>RETURN VALUE</H2><PRE> + Routines that return an integer return <STRONG>ERR</STRONG> upon failure + and <STRONG>OK</STRONG> (SVr4 only specifies "an integer value other than + <STRONG>ERR</STRONG>") upon successful completion, unless otherwise noted + in the preceding routine descriptions. + + Routines that return pointers always return <STRONG>NULL</STRONG> on error. + + +</PRE> +<H2>NOTES</H2><PRE> + The <STRONG>setupterm</STRONG> routine should be used in place of <STRONG>setterm</STRONG>. + It may be useful when you want to test for terminal capa- + bilities without committing to the allocation of storage + involved in <STRONG>initscr</STRONG>. + + Note that <STRONG>vidattr</STRONG> and <STRONG>vidputs</STRONG> may be macros. + + +</PRE> +<H2>PORTABILITY</H2><PRE> + The function <STRONG>setterm</STRONG> is not described in the XSI Curses + standard and must be considered non-portable. All other + functions are as described in the XSI curses standard. + + In System V Release 4, <STRONG>set_curterm</STRONG> has an <STRONG>int</STRONG> return type + and returns <STRONG>OK</STRONG> or <STRONG>ERR</STRONG>. We have chosen to implement the + XSI Curses semantics. + + In System V Release 4, the third argument of <STRONG>tputs</STRONG> has the + type <STRONG>int</STRONG> <STRONG>(*putc)(char)</STRONG>. + + The XSI Curses standard prototypes <STRONG>tparm</STRONG> with a fixed num- + ber of parameters, rather than a variable argument list. + This implementation uses a variable argument list. + Portable applications should provide 9 parameters after + the format; zeroes are fine for this purpose. + + XSI notes that after calling <STRONG>mvcur</STRONG>, the curses state may + not match the actual terminal state, and that an applica- + tion should touch and refresh the window before resuming + normal curses calls. Both ncurses and System V Release 4 + curses implement <STRONG>mvcur</STRONG> using the SCREEN data allocated in + either <STRONG>initscr</STRONG> or <STRONG>newterm</STRONG>. So though it is documented as + a terminfo function, <STRONG>mvcur</STRONG> is really a curses function + which is not well specified. + + +</PRE> +<H2>SEE ALSO</H2><PRE> + <STRONG><A HREF="ncurses.3x.html">curses(3x)</A></STRONG>, <STRONG><A HREF="curs_initscr.3x.html">curs_initscr(3x)</A></STRONG>, <STRONG><A HREF="curs_kernel.3x.html">curs_kernel(3x)</A></STRONG>, <STRONG>curs_term-</STRONG> + <STRONG><A HREF="curs_termcap.3x.html">cap(3x)</A></STRONG>, <STRONG><A HREF="putc.3S.html">putc(3S)</A></STRONG>, <STRONG><A HREF="terminfo.5.html">terminfo(5)</A></STRONG> + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +</PRE> +<HR> +<ADDRESS> +Man(1) output converted with +<a href="http://www.oac.uci.edu/indiv/ehood/man2html.html">man2html</a> +</ADDRESS> +</BODY> +</HTML> |