/* $NetBSD: lancereg.h,v 1.12 2005/12/11 12:21:27 christos Exp $ */ /*- * Copyright (c) 1998, 2000 The NetBSD Foundation, Inc. * All rights reserved. * * This code is derived from software contributed to The NetBSD Foundation * by Charles M. Hannum and Jason R. Thorpe. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. All advertising materials mentioning features or use of this software * must display the following acknowledgement: * This product includes software developed by the NetBSD * Foundation, Inc. and its contributors. * 4. Neither the name of The NetBSD Foundation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ /*- * Copyright (c) 1992, 1993 * The Regents of the University of California. All rights reserved. * * This code is derived from software contributed to Berkeley by * Ralph Campbell and Rick Macklem. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of the University nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * @(#)if_lereg.h 8.1 (Berkeley) 6/10/93 */ /* * Register description for the following Advanced Micro Devices * Ethernet chips: * * - Am7990 Local Area Network Controller for Ethernet (LANCE) * (and its descendent Am79c90 C-LANCE). * * - Am79c900 Integrated Local Area Communications Controller (ILACC) * * - Am79c960 PCnet-ISA Single-Chip Ethernet Controller for ISA * * - Am79c961 PCnet-ISA+ Jumperless Single-Chip Ethernet Controller * for ISA * * - Am79c961A PCnet-ISA II Jumperless Full-Duplex Single-Chip * Ethernet Controller for ISA * * - Am79c965A PCnet-32 Single-Chip 32-bit Ethernet Controller * (for VESA and 486 local busses) * * - Am79c970 PCnet-PCI Single-Chip Ethernet Controller for PCI * Local Bus * * - Am79c970A PCnet-PCI II Single-Chip Full-Duplex Ethernet Controller * for PCI Local Bus * * - Am79c971 PCnet-FAST Single-Chip Full-Duplex 10/100Mbps * Ethernet Controller for PCI Local Bus * * - Am79c972 PCnet-FAST+ Enhanced 10/100Mbps PCI Ethernet Controller * with OnNow Support * * - Am79c973/Am79c975 PCnet-FAST III Single-Chip 10/100Mbps PCI * Ethernet Controller with Integrated PHY * * - Am79c978 PCnet-Home Single-Chip 1/10 Mbps PCI Home * Networking Controller. * * Initialization block, transmit descriptor, and receive descriptor * formats are described in two separate files: * * 16-bit software model (LANCE) am7990reg.h * * 32-bit software model (ILACC) am79900reg.h * * Note that the vast majority of the registers described in this file * belong to follow-on chips to the original LANCE. Only CSR0-CSR3 are * valid on the LANCE. */ /* $FreeBSD: src/sys/dev/le/lancereg.h,v 1.2 2006/05/16 21:04:01 marius Exp $ */ #ifndef _DEV_LE_LANCEREG_H_ #define _DEV_LE_LANCEREG_H_ #define LEBLEN (ETHER_MAX_LEN + ETHER_VLAN_ENCAP_LEN) /* LEMINSIZE should be ETHER_MIN_LEN when LE_MODE_DTCR is set. */ #define LEMINSIZE (ETHER_MIN_LEN - ETHER_CRC_LEN) #define LE_INITADDR(sc) (sc->sc_initaddr) #define LE_RMDADDR(sc, bix) (sc->sc_rmdaddr + sizeof(struct lermd) * (bix)) #define LE_TMDADDR(sc, bix) (sc->sc_tmdaddr + sizeof(struct letmd) * (bix)) #define LE_RBUFADDR(sc, bix) (sc->sc_rbufaddr + LEBLEN * (bix)) #define LE_TBUFADDR(sc, bix) (sc->sc_tbufaddr + LEBLEN * (bix)) /* * The byte count fields in descriptors are in two's complement. * This macro does the conversion for us on unsigned numbers. */ #define LE_BCNT(x) (~(x) + 1) /* * Control and Status Register addresses */ #define LE_CSR0 0x0000 /* Control and status register */ #define LE_CSR1 0x0001 /* low address of init block */ #define LE_CSR2 0x0002 /* high address of init block */ #define LE_CSR3 0x0003 /* Bus master and control */ #define LE_CSR4 0x0004 /* Test and features control */ #define LE_CSR5 0x0005 /* Extended control and Interrupt 1 */ #define LE_CSR6 0x0006 /* Rx/Tx Descriptor table length */ #define LE_CSR7 0x0007 /* Extended control and interrupt 2 */ #define LE_CSR8 0x0008 /* Logical Address Filter 0 */ #define LE_CSR9 0x0009 /* Logical Address Filter 1 */ #define LE_CSR10 0x000a /* Logical Address Filter 2 */ #define LE_CSR11 0x000b /* Logical Address Filter 3 */ #define LE_CSR12 0x000c /* Physical Address 0 */ #define LE_CSR13 0x000d /* Physical Address 1 */ #define LE_CSR14 0x000e /* Physical Address 2 */ #define LE_CSR15 0x000f /* Mode */ #define LE_CSR16 0x0010 /* Initialization Block addr lower */ #define LE_CSR17 0x0011 /* Initialization Block addr upper */ #define LE_CSR18 0x0012 /* Current Rx Buffer addr lower */ #define LE_CSR19 0x0013 /* Current Rx Buffer addr upper */ #define LE_CSR20 0x0014 /* Current Tx Buffer addr lower */ #define LE_CSR21 0x0015 /* Current Tx Buffer addr upper */ #define LE_CSR22 0x0016 /* Next Rx Buffer addr lower */ #define LE_CSR23 0x0017 /* Next Rx Buffer addr upper */ #define LE_CSR24 0x0018 /* Base addr of Rx ring lower */ #define LE_CSR25 0x0019 /* Base addr of Rx ring upper */ #define LE_CSR26 0x001a /* Next Rx Desc addr lower */ #define LE_CSR27 0x001b /* Next Rx Desc addr upper */ #define LE_CSR28 0x001c /* Current Rx Desc addr lower */ #define LE_CSR29 0x001d /* Current Rx Desc addr upper */ #define LE_CSR30 0x001e /* Base addr of Tx ring lower */ #define LE_CSR31 0x001f /* Base addr of Tx ring upper */ #define LE_CSR32 0x0020 /* Next Tx Desc addr lower */ #define LE_CSR33 0x0021 /* Next Tx Desc addr upper */ #define LE_CSR34 0x0022 /* Current Tx Desc addr lower */ #define LE_CSR35 0x0023 /* Current Tx Desc addr upper */ #define LE_CSR36 0x0024 /* Next Next Rx Desc addr lower */ #define LE_CSR37 0x0025 /* Next Next Rx Desc addr upper */ #define LE_CSR38 0x0026 /* Next Next Tx Desc addr lower */ #define LE_CSR39 0x0027 /* Next Next Tx Desc adddr upper */ #define LE_CSR40 0x0028 /* Current Rx Byte Count */ #define LE_CSR41 0x0029 /* Current Rx Status */ #define LE_CSR42 0x002a /* Current Tx Byte Count */ #define LE_CSR43 0x002b /* Current Tx Status */ #define LE_CSR44 0x002c /* Next Rx Byte Count */ #define LE_CSR45 0x002d /* Next Rx Status */ #define LE_CSR46 0x002e /* Tx Poll Time Counter */ #define LE_CSR47 0x002f /* Tx Polling Interval */ #define LE_CSR48 0x0030 /* Rx Poll Time Counter */ #define LE_CSR49 0x0031 /* Rx Polling Interval */ #define LE_CSR58 0x003a /* Software Style */ #define LE_CSR60 0x003c /* Previous Tx Desc addr lower */ #define LE_CSR61 0x003d /* Previous Tx Desc addr upper */ #define LE_CSR62 0x003e /* Previous Tx Byte Count */ #define LE_CSR63 0x003f /* Previous Tx Status */ #define LE_CSR64 0x0040 /* Next Tx Buffer addr lower */ #define LE_CSR65 0x0041 /* Next Tx Buffer addr upper */ #define LE_CSR66 0x0042 /* Next Tx Byte Count */ #define LE_CSR67 0x0043 /* Next Tx Status */ #define LE_CSR72 0x0048 /* Receive Ring Counter */ #define LE_CSR74 0x004a /* Transmit Ring Counter */ #define LE_CSR76 0x004c /* Receive Ring Length */ #define LE_CSR78 0x004e /* Transmit Ring Length */ #define LE_CSR80 0x0050 /* DMA Transfer Counter and FIFO Threshold Control */ #define LE_CSR82 0x0052 /* Tx Desc addr Pointer lower */ #define LE_CSR84 0x0054 /* DMA addr register lower */ #define LE_CSR85 0x0055 /* DMA addr register upper */ #define LE_CSR86 0x0056 /* Buffer Byte Counter */ #define LE_CSR88 0x0058 /* Chip ID Register lower */ #define LE_CSR89 0x0059 /* Chip ID Register upper */ #define LE_CSR92 0x005c /* Ring Length Conversion */ #define LE_CSR100 0x0064 /* Bus Timeout */ #define LE_CSR112 0x0070 /* Missed Frame Count */ #define LE_CSR114 0x0072 /* Receive Collision Count */ #define LE_CSR116 0x0074 /* OnNow Power Mode Register */ #define LE_CSR122 0x007a /* Advanced Feature Control */ #define LE_CSR124 0x007c /* Test Register 1 */ #define LE_CSR125 0x007d /* MAC Enhanced Configuration Control */ /* * Bus Configuration Register addresses */ #define LE_BCR0 0x0000 /* Master Mode Read Active */ #define LE_BCR1 0x0001 /* Master Mode Write Active */ #define LE_BCR2 0x0002 /* Misc. Configuration */ #define LE_BCR4 0x0004 /* LED0 Status */ #define LE_BCR5 0x0005 /* LED1 Status */ #define LE_BCR6 0x0006 /* LED2 Status */ #define LE_BCR7 0x0007 /* LED3 Status */ #define LE_BCR9 0x0009 /* Full-duplex Control */ #define LE_BCR16 0x0010 /* I/O Base Address lower */ #define LE_BCR17 0x0011 /* I/O Base Address upper */ #define LE_BCR18 0x0012 /* Burst and Bus Control Register */ #define LE_BCR19 0x0013 /* EEPROM Control and Status */ #define LE_BCR20 0x0014 /* Software Style */ #define LE_BCR22 0x0016 /* PCI Latency Register */ #define LE_BCR23 0x0017 /* PCI Subsystem Vendor ID */ #define LE_BCR24 0x0018 /* PCI Subsystem ID */ #define LE_BCR25 0x0019 /* SRAM Size Register */ #define LE_BCR26 0x001a /* SRAM Boundary Register */ #define LE_BCR27 0x001b /* SRAM Interface Control Register */ #define LE_BCR28 0x001c /* Exp. Bus Port Addr lower */ #define LE_BCR29 0x001d /* Exp. Bus Port Addr upper */ #define LE_BCR30 0x001e /* Exp. Bus Data Port */ #define LE_BCR31 0x001f /* Software Timer Register */ #define LE_BCR32 0x0020 /* PHY Control and Status Register */ #define LE_BCR33 0x0021 /* PHY Address Register */ #define LE_BCR34 0x0022 /* PHY Management Data Register */ #define LE_BCR35 0x0023 /* PCI Vendor ID Register */ #define LE_BCR36 0x0024 /* PCI Power Management Cap. Alias */ #define LE_BCR37 0x0025 /* PCI DATA0 Alias */ #define LE_BCR38 0x0026 /* PCI DATA1 Alias */ #define LE_BCR39 0x0027 /* PCI DATA2 Alias */ #define LE_BCR40 0x0028 /* PCI DATA3 Alias */ #define LE_BCR41 0x0029 /* PCI DATA4 Alias */ #define LE_BCR42 0x002a /* PCI DATA5 Alias */ #define LE_BCR43 0x002b /* PCI DATA6 Alias */ #define LE_BCR44 0x002c /* PCI DATA7 Alias */ #define LE_BCR45 0x002d /* OnNow Pattern Matching 1 */ #define LE_BCR46 0x002e /* OnNow Pattern Matching 2 */ #define LE_BCR47 0x002f /* OnNow Pattern Matching 3 */ #define LE_BCR48 0x0030 /* LED4 Status */ #define LE_BCR49 0x0031 /* PHY Select */ /* Control and status register 0 (csr0) */ #define LE_C0_ERR 0x8000 /* error summary */ #define LE_C0_BABL 0x4000 /* transmitter timeout error */ #define LE_C0_CERR 0x2000 /* collision */ #define LE_C0_MISS 0x1000 /* missed a packet */ #define LE_C0_MERR 0x0800 /* memory error */ #define LE_C0_RINT 0x0400 /* receiver interrupt */ #define LE_C0_TINT 0x0200 /* transmitter interrupt */ #define LE_C0_IDON 0x0100 /* initialization done */ #define LE_C0_INTR 0x0080 /* interrupt condition */ #define LE_C0_INEA 0x0040 /* interrupt enable */ #define LE_C0_RXON 0x0020 /* receiver on */ #define LE_C0_TXON 0x0010 /* transmitter on */ #define LE_C0_TDMD 0x0008 /* transmit demand */ #define LE_C0_STOP 0x0004 /* disable all external activity */ #define LE_C0_STRT 0x0002 /* enable external activity */ #define LE_C0_INIT 0x0001 /* begin initialization */ #define LE_C0_BITS \ "\20\20ERR\17BABL\16CERR\15MISS\14MERR\13RINT\ \12TINT\11IDON\10INTR\07INEA\06RXON\05TXON\04TDMD\03STOP\02STRT\01INIT" /* Control and status register 3 (csr3) */ #define LE_C3_BABLM 0x4000 /* babble mask */ #define LE_C3_MISSM 0x1000 /* missed frame mask */ #define LE_C3_MERRM 0x0800 /* memory error mask */ #define LE_C3_RINTM 0x0400 /* receive interrupt mask */ #define LE_C3_TINTM 0x0200 /* transmit interrupt mask */ #define LE_C3_IDONM 0x0100 /* initialization done mask */ #define LE_C3_DXSUFLO 0x0040 /* disable tx stop on underflow */ #define LE_C3_LAPPEN 0x0020 /* look ahead packet processing enbl */ #define LE_C3_DXMT2PD 0x0010 /* disable tx two part deferral */ #define LE_C3_EMBA 0x0008 /* enable modified backoff algorithm */ #define LE_C3_BSWP 0x0004 /* byte swap */ #define LE_C3_ACON 0x0002 /* ALE control, eh? */ #define LE_C3_BCON 0x0001 /* byte control */ /* Control and status register 4 (csr4) */ #define LE_C4_EN124 0x8000 /* enable CSR124 */ #define LE_C4_DMAPLUS 0x4000 /* always set (PCnet-PCI) */ #define LE_C4_TIMER 0x2000 /* enable bus activity timer */ #define LE_C4_TXDPOLL 0x1000 /* disable transmit polling */ #define LE_C4_APAD_XMT 0x0800 /* auto pad transmit */ #define LE_C4_ASTRP_RCV 0x0400 /* auto strip receive */ #define LE_C4_MFCO 0x0200 /* missed frame counter overflow */ #define LE_C4_MFCOM 0x0100 /* missed frame coutner overflow mask */ #define LE_C4_UINTCMD 0x0080 /* user interrupt command */ #define LE_C4_UINT 0x0040 /* user interrupt */ #define LE_C4_RCVCCO 0x0020 /* receive collision counter overflow */ #define LE_C4_RCVCCOM 0x0010 /* receive collision counter overflow mask */ #define LE_C4_TXSTRT 0x0008 /* transmit start status */ #define LE_C4_TXSTRTM 0x0004 /* transmit start mask */ /* Control and status register 5 (csr5) */ #define LE_C5_TOKINTD 0x8000 /* transmit ok interrupt disable */ #define LE_C5_LTINTEN 0x4000 /* last transmit interrupt enable */ #define LE_C5_SINT 0x0800 /* system interrupt */ #define LE_C5_SINTE 0x0400 /* system interrupt enable */ #define LE_C5_EXDINT 0x0080 /* excessive deferral interrupt */ #define LE_C5_EXDINTE 0x0040 /* excessive deferral interrupt enbl */ #define LE_C5_MPPLBA 0x0020 /* magic packet physical logical broadcast accept */ #define LE_C5_MPINT 0x0010 /* magic packet interrupt */ #define LE_C5_MPINTE 0x0008 /* magic packet interrupt enable */ #define LE_C5_MPEN 0x0004 /* magic packet enable */ #define LE_C5_MPMODE 0x0002 /* magic packet mode */ #define LE_C5_SPND 0x0001 /* suspend */ /* Control and status register 6 (csr6) */ #define LE_C6_TLEN 0xf000 /* TLEN from init block */ #define LE_C6_RLEN 0x0f00 /* RLEN from init block */ /* Control and status register 7 (csr7) */ #define LE_C7_FASTSPNDE 0x8000 /* fast suspend enable */ #define LE_C7_RDMD 0x2000 /* receive demand */ #define LE_C7_RDXPOLL 0x1000 /* receive disable polling */ #define LE_C7_STINT 0x0800 /* software timer interrupt */ #define LE_C7_STINTE 0x0400 /* software timer interrupt enable */ #define LE_C7_MREINT 0x0200 /* PHY management read error intr */ #define LE_C7_MREINTE 0x0100 /* PHY management read error intr enable */ #define LE_C7_MAPINT 0x0080 /* PHY management auto-poll intr */ #define LE_C7_MAPINTE 0x0040 /* PHY management auto-poll intr enable */ #define LE_C7_MCCINT 0x0020 /* PHY management command complete interrupt */ #define LE_C7_MCCINTE 0x0010 /* PHY management command complete interrupt enable */ #define LE_C7_MCCIINT 0x0008 /* PHY management command complete internal interrupt */ #define LE_C7_MCCIINTE 0x0004 /* PHY management command complete internal interrupt enable */ #define LE_C7_MIIPDTINT 0x0002 /* PHY management detect transition interrupt */ #define LE_C7_MIIPDTINTE 0x0001 /* PHY management detect transition interrupt enable */ /* Control and status register 15 (csr15) */ #define LE_C15_PROM 0x8000 /* promiscuous mode */ #define LE_C15_DRCVBC 0x4000 /* disable Rx of broadcast */ #define LE_C15_DRCVPA 0x2000 /* disable Rx of physical address */ #define LE_C15_DLNKTST 0x1000 /* disable link status */ #define LE_C15_DAPC 0x0800 /* disable auto-polarity correction */ #define LE_C15_MENDECL 0x0400 /* MENDEC Loopback mode */ #define LE_C15_LRT 0x0200 /* low receive threshold (TMAU) */ #define LE_C15_TSEL 0x0200 /* transmit mode select (AUI) */ #define LE_C15_PORTSEL(x) ((x) << 7) /* port select */ #define LE_C15_INTL 0x0040 /* internal loopback */ #define LE_C15_DRTY 0x0020 /* disable retry */ #define LE_C15_FCOLL 0x0010 /* force collision */ #define LE_C15_DXMTFCS 0x0008 /* disable Tx FCS (ADD_FCS overrides) */ #define LE_C15_LOOP 0x0004 /* loopback enable */ #define LE_C15_DTX 0x0002 /* disable transmit */ #define LE_C15_DRX 0x0001 /* disable receiver */ #define LE_PORTSEL_AUI 0 #define LE_PORTSEL_10T 1 #define LE_PORTSEL_GPSI 2 #define LE_PORTSEL_MII 3 #define LE_PORTSEL_MASK 3 /* control and status register 80 (csr80) */ #define LE_C80_RCVFW(x) ((x) << 12) /* Receive FIFO Watermark */ #define LE_C80_RCVFW_MAX 3 #define LE_C80_XMTSP(x) ((x) << 10) /* Transmit Start Point */ #define LE_C80_XMTSP_MAX 3 #define LE_C80_XMTFW(x) ((x) << 8) /* Transmit FIFO Watermark */ #define LE_C80_XMTFW_MAX 3 #define LE_C80_DMATC 0x00ff /* DMA transfer counter */ /* control and status register 116 (csr116) */ #define LE_C116_PME_EN_OVR 0x0400 /* PME_EN overwrite */ #define LE_C116_LCDET 0x0200 /* link change detected */ #define LE_C116_LCMODE 0x0100 /* link change wakeup mode */ #define LE_C116_PMAT 0x0080 /* pattern matched */ #define LE_C116_EMPPLBA 0x0040 /* magic packet physical logical broadcast accept */ #define LE_C116_MPMAT 0x0020 /* magic packet match */ #define LE_C116_MPPEN 0x0010 /* magic packet pin enable */ #define LE_C116_RST_POL 0x0001 /* PHY_RST pin polarity */ /* control and status register 122 (csr122) */ #define LE_C122_RCVALGN 0x0001 /* receive packet align */ /* control and status register 124 (csr124) */ #define LE_C124_RPA 0x0008 /* runt packet accept */ /* control and status register 125 (csr125) */ #define LE_C125_IPG 0xff00 /* inter-packet gap */ #define LE_C125_IFS1 0x00ff /* inter-frame spacing part 1 */ /* bus configuration register 0 (bcr0) */ #define LE_B0_MSRDA 0xffff /* reserved locations */ /* bus configuration register 1 (bcr1) */ #define LE_B1_MSWRA 0xffff /* reserved locations */ /* bus configuration register 2 (bcr2) */ #define LE_B2_PHYSSELEN 0x2000 /* enable writes to BCR18[4:3] */ #define LE_B2_LEDPE 0x1000 /* LED program enable */ #define LE_B2_APROMWE 0x0100 /* Address PROM Write Enable */ #define LE_B2_INTLEVEL 0x0080 /* 1 == edge triggered */ #define LE_B2_DXCVRCTL 0x0020 /* DXCVR control */ #define LE_B2_DXCVRPOL 0x0010 /* DXCVR polarity */ #define LE_B2_EADISEL 0x0008 /* EADI select */ #define LE_B2_AWAKE 0x0004 /* power saving mode select */ #define LE_B2_ASEL 0x0002 /* auto-select PORTSEL */ #define LE_B2_XMAUSEL 0x0001 /* reserved location */ /* bus configuration register 4 (bcr4) */ /* bus configuration register 5 (bcr5) */ /* bus configuration register 6 (bcr6) */ /* bus configuration register 7 (bcr7) */ /* bus configuration register 48 (bcr48) */ #define LE_B4_LEDOUT 0x8000 /* LED output active */ #define LE_B4_LEDPOL 0x4000 /* LED polarity */ #define LE_B4_LEDDIS 0x2000 /* LED disable */ #define LE_B4_100E 0x1000 /* 100Mb/s enable */ #define LE_B4_MPSE 0x0200 /* magic packet status enable */ #define LE_B4_FDLSE 0x0100 /* full-duplex link status enable */ #define LE_B4_PSE 0x0080 /* pulse stretcher enable */ #define LE_B4_LNKSE 0x0040 /* link status enable */ #define LE_B4_RCVME 0x0020 /* receive match status enable */ #define LE_B4_XMTE 0x0010 /* transmit status enable */ #define LE_B4_POWER 0x0008 /* power enable */ #define LE_B4_RCVE 0x0004 /* receive status enable */ #define LE_B4_SPEED 0x0002 /* high speed enable */ #define LE_B4_COLE 0x0001 /* collision status enable */ /* bus configuration register 9 (bcr9) */ #define LE_B9_FDRPAD 0x0004 /* full-duplex runt packet accept disable */ #define LE_B9_AUIFD 0x0002 /* AUI full-duplex */ #define LE_B9_FDEN 0x0001 /* full-duplex enable */ /* bus configuration register 18 (bcr18) */ #define LE_B18_ROMTMG 0xf000 /* expansion rom timing */ #define LE_B18_NOUFLO 0x0800 /* no underflow on transmit */ #define LE_B18_MEMCMD 0x0200 /* memory read multiple enable */ #define LE_B18_EXTREQ 0x0100 /* extended request */ #define LE_B18_DWIO 0x0080 /* double-word I/O */ #define LE_B18_BREADE 0x0040 /* burst read enable */ #define LE_B18_BWRITE 0x0020 /* burst write enable */ #define LE_B18_PHYSEL1 0x0010 /* PHYSEL 1 */ #define LE_B18_PHYSEL0 0x0008 /* PHYSEL 0 */ /* 00 ex ROM/Flash */ /* 01 EADI/MII snoop */ /* 10 reserved */ /* 11 reserved */ #define LE_B18_LINBC 0x0007 /* reserved locations */ /* bus configuration register 19 (bcr19) */ #define LE_B19_PVALID 0x8000 /* EEPROM status valid */ #define LE_B19_PREAD 0x4000 /* EEPROM read command */ #define LE_B19_EEDET 0x2000 /* EEPROM detect */ #define LE_B19_EEN 0x0010 /* EEPROM port enable */ #define LE_B19_ECS 0x0004 /* EEPROM chip select */ #define LE_B19_ESK 0x0002 /* EEPROM serial clock */ #define LE_B19_EDI 0x0001 /* EEPROM data in */ #define LE_B19_EDO 0x0001 /* EEPROM data out */ /* bus configuration register 20 (bcr20) */ #define LE_B20_APERREN 0x0400 /* Advanced parity error handling */ #define LE_B20_CSRPCNET 0x0200 /* PCnet-style CSRs (0 = ILACC) */ #define LE_B20_SSIZE32 0x0100 /* Software Size 32-bit */ #define LE_B20_SSTYLE 0x0007 /* Software Style */ #define LE_B20_SSTYLE_LANCE 0 /* LANCE/PCnet-ISA (16-bit) */ #define LE_B20_SSTYLE_ILACC 1 /* ILACC (32-bit) */ #define LE_B20_SSTYLE_PCNETPCI2 2 /* PCnet-PCI (32-bit) */ #define LE_B20_SSTYLE_PCNETPCI3 3 /* PCnet-PCI II (32-bit) */ /* bus configuration register 25 (bcr25) */ #define LE_B25_SRAM_SIZE 0x00ff /* SRAM size */ /* bus configuration register 26 (bcr26) */ #define LE_B26_SRAM_BND 0x00ff /* SRAM boundary */ /* bus configuration register 27 (bcr27) */ #define LE_B27_PTRTST 0x8000 /* reserved for manuf. tests */ #define LE_B27_LOLATRX 0x4000 /* low latency receive */ #define LE_B27_EBCS 0x0038 /* expansion bus clock source */ /* 000 CLK pin */ /* 001 time base clock */ /* 010 EBCLK pin */ /* 011 reserved */ /* 1xx reserved */ #define LE_B27_CLK_FAC 0x0007 /* clock factor */ /* 000 1 */ /* 001 1/2 */ /* 010 reserved */ /* 011 1/4 */ /* 1xx reserved */ /* bus configuration register 28 (bcr28) */ #define LE_B28_EADDRL 0xffff /* expansion port address lower */ /* bus configuration register 29 (bcr29) */ #define LE_B29_FLASH 0x8000 /* flash access */ #define LE_B29_LAAINC 0x4000 /* lower address auto increment */ #define LE_B29_EPADDRU 0x0007 /* expansion port address upper */ /* bus configuration register 30 (bcr30) */ #define LE_B30_EBDATA 0xffff /* expansion bus data port */ /* bus configuration register 31 (bcr31) */ #define LE_B31_STVAL 0xffff /* software timer value */ /* bus configuration register 32 (bcr32) */ #define LE_B32_ANTST 0x8000 /* reserved for manuf. tests */ #define LE_B32_MIIPD 0x4000 /* MII PHY Detect (manuf. tests) */ #define LE_B32_FMDC 0x3000 /* fast management data clock */ #define LE_B32_APEP 0x0800 /* auto-poll PHY */ #define LE_B32_APDW 0x0700 /* auto-poll dwell time */ #define LE_B32_DANAS 0x0080 /* disable autonegotiation */ #define LE_B32_XPHYRST 0x0040 /* PHY reset */ #define LE_B32_XPHYANE 0x0020 /* PHY autonegotiation enable */ #define LE_B32_XPHYFD 0x0010 /* PHY full-duplex */ #define LE_B32_XPHYSP 0x0008 /* PHY speed */ #define LE_B32_MIIILP 0x0002 /* MII internal loopback */ /* bus configuration register 33 (bcr33) */ #define LE_B33_SHADOW 0x8000 /* shadow enable */ #define LE_B33_MII_SEL 0x4000 /* MII selected */ #define LE_B33_ACOMP 0x2000 /* internal PHY autonegotiation comp */ #define LE_B33_LINK 0x1000 /* link status */ #define LE_B33_FDX 0x0800 /* full-duplex */ #define LE_B33_SPEED 0x0400 /* 1 == high speed */ #define LE_B33_PHYAD 0x03e0 /* PHY address */ #define PHYAD_SHIFT 5 #define LE_B33_REGAD 0x001f /* register address */ /* bus configuration register 34 (bcr34) */ #define LE_B34_MIIMD 0xffff /* MII data */ /* bus configuration register 49 (bcr49) */ #define LE_B49_PCNET 0x8000 /* PCnet mode - Must Be One */ #define LE_B49_PHYSEL_D 0x0300 /* PHY_SEL_Default */ #define LE_B49_PHYSEL_L 0x0010 /* PHY_SEL_Lock */ #define LE_B49_PHYSEL 0x0003 /* PHYSEL */ /* 00 10baseT PHY */ /* 01 HomePNA PHY */ /* 10 external PHY */ /* 11 reserved */ /* Initialization block (mode) */ #define LE_MODE_PROM 0x8000 /* promiscuous mode */ /* 0x7f80 reserved, must be zero */ /* 0x4000 - 0x0080 are not available on LANCE 7990. */ #define LE_MODE_DRCVBC 0x4000 /* disable receive brodcast */ #define LE_MODE_DRCVPA 0x2000 /* disable physical address detection */ #define LE_MODE_DLNKTST 0x1000 /* disable link status */ #define LE_MODE_DAPC 0x0800 /* disable automatic polarity correction */ #define LE_MODE_MENDECL 0x0400 /* MENDEC loopback mode */ #define LE_MODE_LRTTSEL 0x0200 /* lower receive threshold / transmit mode selection */ #define LE_MODE_PSEL1 0x0100 /* port selection bit1 */ #define LE_MODE_PSEL0 0x0080 /* port selection bit0 */ #define LE_MODE_INTL 0x0040 /* internal loopback */ #define LE_MODE_DRTY 0x0020 /* disable retry */ #define LE_MODE_COLL 0x0010 /* force a collision */ #define LE_MODE_DTCR 0x0008 /* disable transmit CRC */ #define LE_MODE_LOOP 0x0004 /* loopback mode */ #define LE_MODE_DTX 0x0002 /* disable transmitter */ #define LE_MODE_DRX 0x0001 /* disable receiver */ #define LE_MODE_NORMAL 0 /* none of the above */ /* * Chip ID (CSR88 IDL, CSR89 IDU) values for various AMD PCnet parts */ #define CHIPID_MANFID(x) (((x) >> 1) & 0x3ff) #define CHIPID_PARTID(x) (((x) >> 12) & 0xffff) #define CHIPID_VER(x) (((x) >> 28) & 0x7) #define PARTID_Am79c960 0x0003 #define PARTID_Am79c961 0x2260 #define PARTID_Am79c961A 0x2261 #define PARTID_Am79c965 0x2430 /* yes, these... */ #define PARTID_Am79c970 0x2430 /* ...are the same */ #define PARTID_Am79c970A 0x2621 #define PARTID_Am79c971 0x2623 #define PARTID_Am79c972 0x2624 #define PARTID_Am79c973 0x2625 #define PARTID_Am79c978 0x2626 #define PARTID_Am79c975 0x2627 #define PARTID_Am79c976 0x2628 #endif /* !_DEV_LE_LANCEREG_H_ */