1 files changed, 84 insertions, 0 deletions
diff --git a/bsd_eth_drivers/libbsdport/libbsdport_api.h b/bsd_eth_drivers/libbsdport/libbsdport_api.h
new file mode 100644
index 0000000..ba3e54e
--- /dev/null
+++ b/bsd_eth_drivers/libbsdport/libbsdport_api.h
@@ -0,0 +1,84 @@
+#ifndef LIBBSDPORT_API_H
+#define LIBBSDPORT_API_H
+
+#include <rtems.h>
+#include <rtems/rtems_bsdnet.h>
+
+/* $Id$ */
+
+/* User API to libbsdport driver attach function, driver table etc. */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef struct driver driver_t;
+
+/* NULL terminated list of all drivers configured into the system.
+ * To be defined by the application.
+ */
+extern driver_t *libbsdport_netdriver_table[];
+
+/* Drivers ported so far: */
+/* Intel E1000 chips */
+extern driver_t libbsdport_em_driver;       
+/* AMD 79C971..976 pcnet PCI */
+extern driver_t libbsdport_pcn_driver;
+/* RealTek RTL8139, 8168, 8169, 8169S, 8110, 8101E, and 8111 PCI */
+extern driver_t libbsdport_re_driver;
+/* AMD/Lance older (and later) chips; this driver also supports what 'pcn'
+ * does but might not be as efficient.
+ * NOTE: The 'le_pci' driver works with the pcnet32 (79C970A) emulation
+ *       of qemu.
+ */
+extern driver_t libbsdport_le_pci_driver;
+
+
+/* Generic driver attach function (can be used in rtems_bsdnet_ifconfig).
+ * This routine selects a driver/device combination based on
+ *  - drivers available / listed in libbsdport_netdriver_table[];
+ *  - devices detected in PCI config space compatible with a listed
+ *    driver.
+ *  - name and unit specified in the rtems_bsdnet_ifconfig.name field
+ *    (empty name: "" is a wildcard).
+ *
+ * E.g. assume that
+ *  1) the 'em' and 'pcn' drivers are listed in the table.
+ *  2) a AMD Am79C973 chip is somewhere on the PCI bus
+ *  3) ifconfig name is ""
+ *  -> the 'pcn' driver is selected and the only AMD chip present
+ *     is used as 'pcn1'.
+ *  -> If the name was 'em' or 'pcn2' no device would be found
+ *     (no em device found; no 2nd pcn device found).
+ *
+ * Now assume that you have a 82544 and two AMD 79C973 devices:
+ *
+ *  name: ""     picks the first of the three chips found in PCI space
+ *  name: "pcn"  picks the first AMD chip found
+ *  name: "em"   picks the first (and only) 82544
+ *  name: "pcn2" picks the second AMD chip
+ *
+ * Also, it is possible to specify a PCI-triple: <busno>:<slotno>.<fnno>
+ * i.e., name: "2:3.0" tries to find a driver that supports the device
+ * at bus #2, slot #2.
+ *
+ * NOTE: detaching a driver is not supported (since rtems bsdnet cannot detach
+ * an interface).
+ */
+int
+libbsdport_netdriver_attach(struct rtems_bsdnet_ifconfig *cfg, int attaching);
+
+/* Print information about all attached drivers to FILE (stdout if NULL)
+ *
+ * RETURNS: number of devices attached so far.
+ *
+ * BUGS:    more info should be printed.
+ */
+int
+libbsdport_netdriver_dump(FILE *f);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif