diff options
Diffstat (limited to 'c/src/lib/libbsp/i386/force386/include/bsp.h')
-rw-r--r-- | c/src/lib/libbsp/i386/force386/include/bsp.h | 156 |
1 files changed, 0 insertions, 156 deletions
diff --git a/c/src/lib/libbsp/i386/force386/include/bsp.h b/c/src/lib/libbsp/i386/force386/include/bsp.h deleted file mode 100644 index b9b050b3c6..0000000000 --- a/c/src/lib/libbsp/i386/force386/include/bsp.h +++ /dev/null @@ -1,156 +0,0 @@ -/* bsp.h - * - * This include file definitions related to the Force CPU-386 board. - * - * COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994. - * On-Line Applications Research Corporation (OAR). - * All rights assigned to U.S. Government, 1994. - * - * This material may be reproduced by or for the U.S. Government pursuant - * to the copyright license under the clause at DFARS 252.227-7013. This - * notice must appear in all copies of this file and its derivatives. - * - * $Id$ - */ - -#ifndef __FORCE386_h -#define __FORCE386_h - -#ifdef __cplusplus -extern "C" { -#endif - -#include <rtems.h> -#include <iosupp.h> - -/* - * Define the time limits for RTEMS Test Suite test durations. - * Long test and short test duration limits are provided. These - * values are in seconds and need to be converted to ticks for the - * application. - * - */ - -#define MAX_LONG_TEST_DURATION 300 /* 5 minutes = 300 seconds */ -#define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */ - -/* - * Define the interrupt mechanism for Time Test 27 - * - * NOTE: Use a software interrupt for the i386. - */ - -#define MUST_WAIT_FOR_INTERRUTPT 0 - -#define Install_tm27_vector( handler ) set_vector( (handler), 0x90, 1 ) - -#define Cause_tm27_intr() asm volatile( "int $0x90" : : ); - -#define Clear_tm27_intr() - -#define Lower_tm27_intr() - -/* - * Simple spin delay in microsecond units for device drivers. - * This is very dependent on the clock speed of the target. - */ - -#define delay( _microseconds ) \ - { \ - rtems_unsigned32 _counter; \ - \ - _counter = (_microseconds); \ - \ - asm volatile ( "0: nop;" \ - " mov %0,%0 ;" \ - " loop 0b" : "=c" (_counter) \ - : "0" (_counter) \ - ); \ - \ - } - -/* Constants */ - -#define RAM_START 0 -#define RAM_END 0x100000 - -/* I/O addressing */ - -/* - * The following determines whether Port B or the Console should - * be used for test I/O. Setting ONE (and only ONE) of these to 1 - * enables I/O on that port. - * - * PORT A - DUSCC MC68562 Channel A - * PORT B - DUSCC MC68562 Channel B - * PORT C - MFP MC68901 Channel (*** FORCEbug console ***) - */ - -#define PORTB 1 /* use port b as test port */ -#define PORTC 0 /* use console port as test port */ - -#if ( PORTB == 1 ) -#define TX_STATUS 0x1b6 /* DUSCC General Status Register */ -#define RX_STATUS 0x1b6 /* DUSCC General Status Register */ -#define TX_BUFFER 0x1e0 /* DUSCC Transmitter Channel B */ -#define RX_BUFFER 0x1e8 /* DUSCC Receiver Channel B */ -#define Is_tx_ready( _status ) ( (_status) & 0x20 ) -#define Is_rx_ready( _status ) ( (_status) & 0x10 ) -#endif - -#if ( PORTC == 1 ) -#define TX_STATUS 0x12c /* MFP Transmit Status Register */ -#define RX_STATUS 0x12a /* MFP Receive Status Register */ -#define TX_BUFFER 0x12e /* MFP Transmitter Channel */ -#define RX_BUFFER 0x12e /* MFP Receiver Channel */ -#define Is_tx_ready( _status ) ( (_status) & 0x80 ) -#define Is_rx_ready( _status ) ( (_status) & 0x80 ) -#endif - -/* Timer constants */ - -#define IERA 0x106 /* Interrupt Enable Register A */ -#define IMRA 0x112 /* Interrupt Mask Register A */ -#define TACR 0x118 /* Timer A Control Register */ -#define TADR 0x11e /* Timer A Data Register */ - -#define IERB 0x108 /* Interrupt Enable Register B */ -#define TBCR 0x11a /* Timer B Control Register */ -#define TBDR 0x120 /* Timer B Data Register */ - -/* Structures */ - -#ifdef F386_INIT -#undef BSP_EXTERN -#define BSP_EXTERN -#else -#undef BSP_EXTERN -#define BSP_EXTERN extern -#endif - -/* miscellaneous stuff assumed to exist */ - -extern rtems_configuration_table BSP_Configuration; - -extern i386_IDT_slot Interrupt_descriptor_table[ 256 ]; -extern i386_GDT_slot Global_descriptor_table[ 8192 ]; - -BSP_EXTERN unsigned short Idt[3]; /* Interrupt Descriptor Table Address */ -BSP_EXTERN unsigned short Gdt[3]; /* Global Descriptor Table Address */ -BSP_EXTERN unsigned int Idt_base; -BSP_EXTERN unsigned int Gdt_base; - -/* routines */ - -i386_isr set_vector( - rtems_isr_entry handler, - rtems_vector_number vector, - int type -); - -#ifdef __cplusplus -} -#endif - -#endif -/* end of include file */ |