diff options
Diffstat (limited to 'netdemo/README')
-rw-r--r-- | netdemo/README | 35 |
1 files changed, 15 insertions, 20 deletions
diff --git a/netdemo/README b/netdemo/README index 143b7b6..80bd7aa 100644 --- a/netdemo/README +++ b/netdemo/README @@ -2,31 +2,26 @@ # $Id$ # -A simple application to test some of the KA9Q networking code. +A simple application to test some of the RTEMS/FreeBSD networking code. ************************** * NOTES * ************************** -1. Make sure you change the definition of MY_ETHERNET_ADDRESS in init.c - before you try to use this program. +BE SURE TO LOCALIZE networkconfig.h. FAILURE TO DO SO MAY PROVOKE YOUR +NETWORK ADMINISTRATOR TO THE POINT WHERE VICIOUS ATTACKS WILL BE MADE +UPON YOU. -2. If you do not use BOOTP (i.e. the `#define USE_BOOTP 1' in init.c is - removed), make sure you change the definition of MY_INTERNET_ADDRESS - before you try to use the program. +Once this program is running on the target machine, you can test +the network code by: -FAILURE TO FOLLOW THE ABOVE INSTRUCTIONS MAY PROVOKE YOUR NETWORK -ADMINISTRATOR TO THE POINT WHERE VICIOUS ATTACKS WILL BE MADE UPON YOU. - -3. Once this program is running on the target machine, you can test - the network code by: - a) Typing commands at the target console: - s - show network statistics - t - transmit TCP packets - u - transmit UDP packets - b) Run `telnet target_machine 24742' on another machines. - Everything you type should be echoed back and noted on - the target console. - You can run more than one telnet session at once. - You can use port number 24743 as well. + Typing commands at the target console: + - show network statistics + - transmit TCP packets + - transmit UDP packets + Run `telnet target_machine 24742' on another machines. + Everything you type should be echoed back and noted on + the target console. + You can run more than one telnet session at once. + You can use port number 24743 as well. |