diff options
Diffstat (limited to 'cpukit/score/cpu/a29k')
-rw-r--r-- | cpukit/score/cpu/a29k/amd.ah | 531 | ||||
-rw-r--r-- | cpukit/score/cpu/a29k/asm.h | 103 | ||||
-rw-r--r-- | cpukit/score/cpu/a29k/cpu.c | 263 | ||||
-rw-r--r-- | cpukit/score/cpu/a29k/pswmacro.ah | 442 | ||||
-rw-r--r-- | cpukit/score/cpu/a29k/register.ah | 214 |
5 files changed, 0 insertions, 1553 deletions
diff --git a/cpukit/score/cpu/a29k/amd.ah b/cpukit/score/cpu/a29k/amd.ah deleted file mode 100644 index 006e7e15e7..0000000000 --- a/cpukit/score/cpu/a29k/amd.ah +++ /dev/null @@ -1,531 +0,0 @@ -; /* @(#)amd.ah 1.1 96/05/23 08:56:58, TEI */ -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Initialization values for registers after RESET -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; -: /* $Id$ */ -;* File information and includes. - - .file "amd.ah" - .ident "@(#)amd.ah 1.1 96/05/23 08:56:58, TEI" - - - -; -;* AMD PROCESSOR SPECIFIC VALUES... -; - -; -;* Processor revision levels... -; - -; PRL values: 31-28 27-24 -; Am29000 0 x -; Am29005 1 x -; Am29050 2 x -; Am29035 3 x -; Am29030 4 x -; Am29200 5 x -; Am29205 5 1x -; Am29240 6 0 -; Manx 7 0 -; Cougar 8 0 - - - .equ AM29000_PRL, 0x00 - - .equ AM29005_PRL, 0x10 - - .equ AM29050_PRL, 0x20 - - .equ AM29035_PRL, 0x30 - - .equ AM29030_PRL, 0x40 - - .equ AM29200_PRL, 0x50 - - .equ AM29205_PRL, 0x58 - - .equ AM29240_PRL, 0x60 - - .equ AM29040_PRL, 0x70 - - .equ MANX_PRL, 0x70 - - .equ COUGAR_PRL, 0x80 - -; -;* data structures sizes. -; - .equ CFGINFO_SIZE, 16*4 - - .equ PGMINFO_SIZE, 16*4 - - .equ VARARGS_SPACE, 16*4 - - .equ WINDOWSIZE, 0x80 -; -;* Am29027 Mode registers -; - - .equ Am29027Mode1, 0x0fc00820 - - .equ Am29027Mode2, 0x00001375 - - - -;* Processor Based Equates and Defines - - .equ SIG_SYNC, -1 - - .equ ENABLE, (SM) - - .equ DISABLE, (ENABLE | DI | DA) - - .equ DISABLE_FZ, (FZ | ENABLE | DI | DA) - - .equ CLR_TRAP, (FZ | DA) - - .equ InitOPS, (TD | SM | (3<<IMShift) | DI | DA) - - .equ InitCPS, (TD | SM | (0<<IMShift) | DI | DA) - - .equ InitCPS1, (TD | SM | (0<<IMShift) | DI ) - - .equ CPS_TMR, (SM | (0<<IMShift) | DI) - - .equ CPS_INT0, (TD | SM | (0<<IMShift)) - - .equ CPS_TMRINT0, (SM | (0<<IMShift)) - - .equ InitCFG, 0x0 - - .equ InitRBP, (B0|B1|B2|B3|B4|B5) - - .equ TMC_VALUE, 0xFFFFFF - - .equ TMR_VALUE, (IE | TMC_VALUE) - - - - - - -;* 29205 specific (internal) peripheral initialization constants. - -; Current Processor Status (CPS) Register. -; Old Processor Status Register (OPS). - - .equ DA, 0x00001 - .equ DI, 0x00002 - .equ IMShift,0x2 - .equ SM, 0x00010 - .equ PI, 0x00020 - .equ PD, 0x00040 - .equ WM, 0x00080 - .equ RE, 0x00100 - .equ LK, 0x00200 - .equ FZ, 0x00400 - .equ TU, 0x00800 - .equ TP, 0x01000 - .equ TE, 0x02000 - .equ IP, 0x04000 - .equ CA, 0x08000 - .equ MM, 0x10000 - .equ TD, 0x20000 - -; Configuration Register (CFG) - - .equ CD, 0x01 - .equ CP, 0x02 - .equ BO, 0x04 - .equ RV, 0x08 - .equ VF, 0x10 - .equ DW, 0x20 - .equ CO, 0x40 - .equ EE, 0x80 - .equ IDShift, 8 - .equ CFG_ID, 0x100 - .equ ILShift, 9 - .equ CFG_ILMask, 0x600 - .equ DDShift, 11 - .equ CFG_DD, 0x800 - .equ DLShift, 12 - .equ CFG_DLMask, 0x3000 - .equ PCEShift, 14 - .equ CFG_PCE, 0x4000 - .equ PMBShift, 16 - .equ D16, 0x8000 - .equ TBOShift, 23 - .equ PRLShift, 24 - -; Channel Control Register (CHC) - - .equ CV, 0x1 - .equ NN, 0x2 - .equ TRShift, 2 - .equ TF, 0x400 - .equ PER, 0x800 - .equ LA, 0x1000 - .equ ST, 0x2000 - .equ ML, 0x4000 - .equ LS, 0x8000 - .equ CRShift, 16 - .equ CNTLShift, 24 - .equ CEShift, 31 - .equ WBERShift, 31 - -; Register Bank Protect (RBP) - .equ B0, 0x1 - .equ B1, 0x2 - .equ B2, 0x4 - .equ B3, 0x8 - .equ B4, 0x10 - .equ B5, 0x20 - .equ B6, 0x40 - .equ B7, 0x80 - .equ B8, 0x100 - .equ B9, 0x200 - .equ B10, 0x400 - .equ B11, 0x800 - .equ B12, 0x1000 - .equ B13, 0x2000 - .equ B14, 0x4000 - .equ B15, 0x8000 - -; Timer Counter - - .equ TCVMask, 0xffffff - -; Timer Reload Register - - .equ IE, 0x1000000 - .equ IN, 0x2000000 - .equ OV, 0x4000000 - .equ TRVMAsk, 0xffffff - -; MMU Configuration - - .equ PSShift, 8 - .equ PS0Shift, 8 - .equ PS1Shift, 12 - -; LRU Recommendation (LRU) - .equ LRUMask, 0xff - -; Reason Vector (RSN) - .equ RSNMask, 0xff - -; Region Mapping Address (RMA0 | RMA1) - .equ PBAMask,0xffff - .equ VBAShift, 16 - -; Region Mapping Control (RMC0 | RMC1) - .equ TIDMask, 0xff - .equ RMC_UE, 0x100 - .equ RMC_UW, 0x200 - .equ RMC_UR, 0x400 - .equ RMC_SE, 0x800 - .equ RMC_SW, 0x1000 - .equ RMC_SR, 0x2000 - .equ RMC_VE, 0x4000 - .equ RMC_IO, 0x10000 - .equ RGSShift, 17 - .equ RMC_PGMShift, 22 - -; Instruction breakpoint Control (IBC0 | IBC1) - .equ BPIDMask, 0xff - .equ BTE, 0x100 - .equ BRM, 0x200 - .equ IBC_BSY, 0x400 - .equ BEN, 0x800 - .equ BHO, 0x1000 - -; Cache Data Register (CDR) - .equ CDR_US, 0x1 - .equ P, 0x2 - .equ CDR_V, 0x4 - .equ IATAGShift, 20 - -; Cache Interface Register (CIR) - .equ CPTRShift, 2 - .equ CIR_RW, 0x1000000 - .equ FSELShift, 28 - -; Indirect Pointer A, B, C (IPA, IPB, IPC) - .equ IPShift, 2 - -; ALU Status (ALU) - .equ FCMask, 0x1F - .equ BPShift, 5 - .equ C, 0x80 - .equ Z, 0x100 - .equ N, 0x200 - .equ ALU_V, 0x400 - .equ DF, 0x800 - -; Byte Pointer - .equ BPMask, 0x3 - -; Load/Store Count Remaining (CR) - .equ CRMask, 0xff - -; Floating Point Environment (FPE) - .equ NM, 0x1 - .equ RM, 0x2 - .equ VM, 0x4 - .equ UM, 0x8 - .equ XM, 0x10 - .equ DM, 0x20 - .equ FRMShift, 6 - .equ FF, 0x100 - .equ ACFShift, 9 - -; Integer Environment (INTE) - .equ MO, 0x1 - .equ DO, 0x2 - -; Floating Point Status (FPS) - .equ NS, 0x1 - .equ RS, 0x2 - .equ VS, 0x4 - .equ FPS_US, 0x8 - .equ XS, 0x10 - .equ DS, 0x20 - .equ NT, 0x100 - .equ RT, 0x200 - .equ VT, 0x400 - .equ UT, 0x800 - .equ XT, 0x1000 - .equ DT, 0x2000 - -; Exception Opcode (EXOP) - .equ IOPMask, 0xff - -; TLB Entry Word 0 -; .equ TIDMask, 0xff already defined above - .equ TLB_UE, 0x100 - .equ TLB_UW, 0x200 - .equ TLB_UR, 0x400 - .equ TLB_SE, 0x800 - .equ TLB_SW, 0x1000 - .equ TLB_SR, 0x2000 - .equ TLB_VE, 0x4000 - .equ VTAGShift, 15 - -; TLB Entry Word 1 - .equ TLB_IO, 0x1 - .equ U, 0x2 - .equ TLB_PGMShift, 6 - .equ RPNShift, 10 - -; Am29200 ROM Control bits. - .equ RMCT_DW0Shift, 29 - .equ RMCT_DW1Shift, 21 - .equ RMCT_DW2Shift, 13 - .equ RMCT_DW3Shift, 5 - -; Am29200 DRAM Control bits. - .equ DW3, (1<<18) - .equ DW2, (1<<22) - .equ DW1, (1<<26) - .equ DW0, (1<<30) - - ; Internal peripheral address assignments. - .equ RMCT, 0x80000000 - .equ RMCF, 0x80000004 - .equ DRCT, 0x80000008 - .equ DRCF, 0x8000000C - .equ DRM0, 0x80000010 - .equ DRM1, 0x80000014 - .equ DRM2, 0x80000018 - .equ DRM3, 0x8000001C - .equ PIACT0, 0x80000020 - .equ PIACT1, 0x80000020 - .equ ICT, 0x80000028 - .equ DMCT0, 0x80000030 - .equ DMAD0, 0x80000034 - .ifdef revA - .equ TAD0, 0x80000036 - .equ TCN0, 0x8000003A - .else - .equ TAD0, 0x80000070 ; default - .equ TCN0, 0x8000003C ; default - .endif - .equ DMCN0, 0x80000038 - .equ DMCT1, 0x80000040 - .equ DMAD1, 0x80000044 - .equ DMCN1, 0x80000048 - .equ SPCT, 0x80000080 - .equ SPST, 0x80000084 - .equ SPTH, 0x80000088 - .equ SPRB, 0x8000008C - .equ BAUD, 0x80000090 - .equ PPCT, 0x800000C0 - .equ PPST, 0x800000C1 - .equ PPDT, 0x800000C4 - .equ POCT, 0x800000D0 - .equ PIN, 0x800000D4 - .equ POUT, 0x800000D8 - .equ POEN, 0x800000DC - .equ VCT, 0x800000E0 - .equ TOP, 0x800000E4 - .equ SIDE, 0x800000E8 - .equ VDT, 0x800000EC - - ; Interrupt Controller Register bits. - .equ TXDI, (1<<5) - .equ RXDI, (1<<6) - .equ RXSI, (1<<7) - .equ PPI, (1<<11) - .equ DMA1I, (1<<13) - .equ DMA0I, (1<<14) - .equ IOPIMask, (0xFF<<16) - .equ VDI, (1<<27) - .equ ICT200_I, (TXDI|RXDI|RXSI|PPI|DMA1I|DMA0I|IOPIMask|VDI) - .equ ICT205_I, (TXDI|RXDI|RXSI|PPI|DMA1I|DMA0I|IOPIMask|VDI) - - ; Serial port Initialization bits - .equ NO_PARITY, 0 - - - ; SPST bits - .equ THREShift, 22 - -;* REGISTER Addresses - - .equ ROMCntlRegAddr, 0x80000000 - - .equ ROMCfgRegAddr, 0x80000004 - - .equ DRAMCntlRegAddr, 0x80000008 - - .equ DRAMCfgRegAddr, 0x8000000C - - .equ DRAMMap0RegAddr, 0x80000010 - - .equ DRAMMap1RegAddr, 0x80000014 - - .equ DRAMMap2RegAddr, 0x80000018 - - .equ DRAMMap3RegAddr, 0x8000001C - - .equ PIACntl0RegAddr, 0x80000020 - - .equ PIACntl1RegAddr, 0x80000024 - - .equ INTRCntlRegAddr, 0x80000028 - - .equ DMACntl0RegAddr, 0x80000030 - - .equ DMACntl1RegAddr, 0x80000040 - - .equ SERPortCntlRegAddr, 0x80000080 - - .equ SERPortStatRegAddr, 0x80000084 - - .equ SERPortTHLDRegAddr, 0x80000088 - - .equ SERPortRbufRegAddr, 0x8000008C - - .equ SERPortBaudRegAddr, 0x80000090 - - .equ PARPortCntlRegAddr, 0x800000C0 - - .equ PIOCntlRegAddr, 0x800000D0 - - .equ PIOInpRegAddr, 0x800000D4 - - .equ PIOOutRegAddr, 0x800000D8 - - .equ PIOOutEnaRegAddr, 0x800000DC - - .equ VCTCntlRegAddr, 0x800000E0 - -; -;* Control constants -; - -;* AM29030 Timer related constants. - - .equ TMR_IE, 0x01000000 - - .equ TMR_IN, 0x02000000 - - .equ TMR_OV, 0x04000000 - - .equ TMC_INITCNT, 1613 - -; -;* System initialization values. -; - - .equ __os_version, 0x0001 ; - - .equ STACKSize, 0x8000 ; - - .equ PGMExecMode, 0x0000 ; - - .equ TSTCK_OFST, 28 * 4 - - .equ CSTCK_OFST, 29 * 4 - - .equ TMSTCK_OFST, 30 * 4 - - .equ CMSTCK_OFST, 31 * 4 - - .equ CTXSW_OK, 0xA55A ; ctx switch ok - - .set NV_STARTOFST, 0x20 ; 32 bytes - - .set NV_BAUDOFST, 0x00 ; 00 bytes - - .set reg_cir, 29 - - .set reg_cdr, 30 - - .equ MSG_BUFSIZE, 0x1000 ; serial buffer size - - .equ ILLOPTRAP, 0 - - .equ UATRAP, 1 - - .equ PVTRAP, 5 - - .equ UITLBMISSTRAP, 8 - - .equ UDTLBMISSTRAP, 9 - - .equ TIMERTRAP, 14 - - .equ TRACETRAP, 15 - - .equ XLINXTRAP, 16 - - .equ SERIALTRAP, 17 - - .equ SLOWTMRTRAP, 18 - - .equ PORTTRAP, 19 - - .equ SVSCTRAP, 80 - - .equ SVSCTRAP1, 81 - - .equ V_CACHETRAP, 66 ; - - .equ V_SETSERVICE, 67 ; - - .equ INIT_TIMER, 100 - - .equ DISABLE_TIMER, 101 - - .equ GET_TIMER, 102 - - .equ CLEAR_TIMER, 103 - - .equ V_SPILL, 64 - - .equ V_FILL, 65 - - .equ SIGDFL, 105 diff --git a/cpukit/score/cpu/a29k/asm.h b/cpukit/score/cpu/a29k/asm.h deleted file mode 100644 index 5622b124ce..0000000000 --- a/cpukit/score/cpu/a29k/asm.h +++ /dev/null @@ -1,103 +0,0 @@ -/* asm.h - * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. - * - * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * - * !!! THIS FILE DOES NOT APPEAR TO HAVE BEEN USED IN THE 29K PORT !!! - * - * COPYRIGHT: - * - * This file is based on similar code found in newlib available - * from ftp.cygnus.com. The file which was used had no copyright - * notice. This file is freely distributable as long as the source - * of the file is noted. This file is: - * - * COPYRIGHT (c) 1989-1997 - * On-Line Applications Research Corporation (OAR). - * - * $Id$ - */ - -#ifndef __A29K_ASM_h -#define __A29K_ASM_h - -/* - * Indicate we are in an assembly file and get the basic CPU definitions. - */ - -#ifndef ASM -#define ASM -#endif -#include <rtems/score/targopts.h> -#include <rtems/score/asm.h> - -/* - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. - */ - -#ifndef __USER_LABEL_PREFIX__ -#define __USER_LABEL_PREFIX__ _ -#endif - -#ifndef __REGISTER_PREFIX__ -#define __REGISTER_PREFIX__ -#endif - -/* ANSI concatenation macros. */ - -#define CONCAT1(a, b) CONCAT2(a, b) -#define CONCAT2(a, b) a ## b - -/* Use the right prefix for global labels. */ - -#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x) - -/* Use the right prefix for registers. */ - -#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x) - -/* - * define macros for all of the registers on this CPU - * - * EXAMPLE: #define d0 REG (d0) - */ - -/* - * Define macros to handle section beginning and ends. - */ - - -#define BEGIN_CODE_DCL .text -#define END_CODE_DCL -#define BEGIN_DATA_DCL .data -#define END_DATA_DCL -#define BEGIN_CODE .text -#define END_CODE -#define BEGIN_DATA -#define END_DATA -#define BEGIN_BSS -#define END_BSS -#define END - -/* - * Following must be tailor for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. - */ - -#define PUBLIC(sym) .globl SYM (sym) -#define EXTERN(sym) .globl SYM (sym) - -#endif -/* end of include file */ - - diff --git a/cpukit/score/cpu/a29k/cpu.c b/cpukit/score/cpu/a29k/cpu.c deleted file mode 100644 index 111533a2ae..0000000000 --- a/cpukit/score/cpu/a29k/cpu.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * AMD 29K CPU Dependent Source - * - * Author: Craig Lebakken <craigl@transition.com> - * - * COPYRIGHT (c) 1996 by Transition Networks Inc. - * - * To anyone who acknowledges that this file is provided "AS IS" - * without any express or implied warranty: - * permission to use, copy, modify, and distribute this file - * for any purpose is hereby granted without fee, provided that - * the above copyright notice and this notice appears in all - * copies, and that the name of Transition Networks not be used in - * advertising or publicity pertaining to distribution of the - * software without specific, written prior permission. - * Transition Networks makes no representations about the suitability - * of this software for any purpose. - * - * Derived from c/src/exec/score/cpu/no_cpu/cpu.c: - * - * COPYRIGHT (c) 1989-1998. - * On-Line Applications Research Corporation (OAR). - * Copyright assigned to U.S. Government, 1994. - * - * The license and distribution terms for this file may be - * found in the file LICENSE in this distribution or at - * http://www.OARcorp.com/rtems/license.html. - * - * $Id$ - */ -#ifndef lint -static char _sccsid[] = "@(#)cpu.c 10/21/96 1.8\n"; -#endif - -#include <rtems/system.h> -#include <rtems/score/isr.h> -#include <rtems/score/wkspace.h> -#include <rtems/score/thread.h> -#include <stdio.h> -#include <stdlib.h> - -void a29k_ISR_Handler(unsigned32 vector); - -/* _CPU_Initialize - * - * This routine performs processor dependent initialization. - * - * INPUT PARAMETERS: - * cpu_table - CPU table to initialize - * thread_dispatch - address of disptaching routine - */ - - -void _CPU_Initialize( - rtems_cpu_table *cpu_table, - void (*thread_dispatch)() /* ignored on this CPU */ -) -{ - unsigned int i; - /* - * The thread_dispatch argument is the address of the entry point - * for the routine called at the end of an ISR once it has been - * decided a context switch is necessary. On some compilation - * systems it is difficult to call a high-level language routine - * from assembly. This allows us to trick these systems. - * - * If you encounter this problem save the entry point in a CPU - * dependent variable. - */ - - _CPU_Thread_dispatch_pointer = thread_dispatch; - - /* - * If there is not an easy way to initialize the FP context - * during Context_Initialize, then it is usually easier to - * save an "uninitialized" FP context here and copy it to - * the task's during Context_Initialize. - */ - - /* FP context initialization support goes here */ - - _CPU_Table = *cpu_table; - - for ( i = 0; i < ISR_NUMBER_OF_VECTORS; i++ ) - { - _ISR_Vector_table[i] = (proc_ptr)NULL; - } -} - -/*PAGE - * - * _CPU_ISR_Get_level - */ - -unsigned32 _CPU_ISR_Get_level( void ) -{ - unsigned32 cps; - - /* - * This routine returns the current interrupt level. - */ - cps = a29k_getops(); - if (cps & (TD|DI)) - return 1; - else - return 0; -} - -/*PAGE - * - * _CPU_ISR_install_raw_handler - */ - -extern void intr14( void ); -extern void intr18( void ); -extern void intr19( void ); - -void _CPU_ISR_install_raw_handler( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - /* - * This is where we install the interrupt handler into the "raw" interrupt - * table used by the CPU to dispatch interrupt handlers. - */ - switch( vector ) - { - case 14: - _settrap( vector, intr14 ); - break; - case 18: - _settrap( vector, intr18 ); - break; - case 19: - _settrap( vector, intr19 ); - break; - - default: - break; - } -} - - -/*PAGE - * - * _CPU_ISR_install_vector - * - * This kernel routine installs the RTEMS handler for the - * specified vector. - * - * Input parameters: - * vector - interrupt vector number - * old_handler - former ISR for this vector number - * new_handler - replacement ISR for this vector number - * - * Output parameters: NONE - * - */ - -void _CPU_ISR_install_vector( - unsigned32 vector, - proc_ptr new_handler, - proc_ptr *old_handler -) -{ - *old_handler = _ISR_Vector_table[ vector ]; - - /* - * If the interrupt vector table is a table of pointer to isr entry - * points, then we need to install the appropriate RTEMS interrupt - * handler for this vector number. - */ - - _CPU_ISR_install_raw_handler( vector, new_handler, old_handler ); - - /* - * We put the actual user ISR address in '_ISR_vector_table'. This will - * be used by the _ISR_Handler so the user gets control. - */ - - _ISR_Vector_table[ vector ] = new_handler; -} - -/*PAGE - * - * _CPU_Install_interrupt_stack - */ - -void _CPU_Install_interrupt_stack( void ) -{ -} - -/*PAGE - * - * _CPU_Internal_threads_Idle_thread_body - * - * NOTES: - * - * 1. This is the same as the regular CPU independent algorithm. - * - * 2. If you implement this using a "halt", "idle", or "shutdown" - * instruction, then don't forget to put it in an infinite loop. - * - * 3. Be warned. Some processors with onboard DMA have been known - * to stop the DMA if the CPU were put in IDLE mode. This might - * also be a problem with other on-chip peripherals. So use this - * hook with caution. - */ - -void _CPU_Internal_threads_Idle_thread_body( void ) -{ - - for( ; ; ) - { - } - /* insert your "halt" instruction here */ ; -} - -void a29k_fatal_error( unsigned32 error ) -{ - printf("\n\nfatal error %d, rebooting!!!\n",error ); - exit(error); -} - - /* - * This discussion ignores a lot of the ugly details in a real - * implementation such as saving enough registers/state to be - * able to do something real. Keep in mind that the goal is - * to invoke a user's ISR handler which is written in C and - * uses a certain set of registers. - * - * Also note that the exact order is to a large extent flexible. - * Hardware will dictate a sequence for a certain subset of - * _ISR_Handler while requirements for setting - */ - - /* - * At entry to "common" _ISR_Handler, the vector number must be - * available. On some CPUs the hardware puts either the vector - * number or the offset into the vector table for this ISR in a - * known place. If the hardware does not give us this information, - * then the assembly portion of RTEMS for this port will contain - * a set of distinct interrupt entry points which somehow place - * the vector number in a known place (which is safe if another - * interrupt nests this one) and branches to _ISR_Handler. - * - */ - -void a29k_ISR_Handler(unsigned32 vector) -{ - _ISR_Nest_level++; - _Thread_Dispatch_disable_level++; - if ( _ISR_Vector_table[ vector ] ) - (*_ISR_Vector_table[ vector ])( vector ); - --_Thread_Dispatch_disable_level; - --_ISR_Nest_level; - if ( !_Thread_Dispatch_disable_level && !_ISR_Nest_level && - (_Context_Switch_necessary || _ISR_Signals_to_thread_executing )) - _Thread_Dispatch(); - return; -} diff --git a/cpukit/score/cpu/a29k/pswmacro.ah b/cpukit/score/cpu/a29k/pswmacro.ah deleted file mode 100644 index c21eee4f35..0000000000 --- a/cpukit/score/cpu/a29k/pswmacro.ah +++ /dev/null @@ -1,442 +0,0 @@ -; /* @(#)pswmacro.ah 1.1 96/05/23 08:56:58, TEI */ -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; macros: Do_install and init_TLB -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; /* $Id$ */ - -;* File information and includes. - - .file "macro.ah" - .ident "@(#)pswmacro.ah 1.1 96/05/23 08:56:58, TEI" - - - .macro CONST32, RegName, RegValue - const RegName, RegValue - consth RegName, RegValue - .endm - - .macro CONSTX, RegName, RegValue - .if (RegValue) <= 0x0000ffff - const RegName, RegValue - .else - const RegName, RegValue - consth RegName, RegValue - .endif - .endm - - .macro PRODEV, RegName - srl RegName, RegName, 24 - .endm - -; -;* MACRO TO INSTALL VECTOR TABLE ENTRIES -; - -;* Assumes vector table address in v0 - - .macro _setvec, trapnum, trapaddr - mfsr v0, vab ; - const v2, trapnum ; - sll v1, v2, 2 ; - add v1, v1, v0 ; v0 has location of vector tab - - const v2, trapaddr ; - consth v2, trapaddr ; - store 0, 0, v2, v1 ; - nop ; - .endm - - .macro syscall, name - const tav, HIF_@name ; - asneq V_SYSCALL, gr1, gr1 ; - nop ; - nop ; - .endm - - - -;* MACRO TO INSTALL VECTOR TABLE ENTRIES - - .macro Do_Install, V_Number, V_Address - const lr4, V_Address - consth lr4, V_Address - const lr3, V_Number * 4 - consth lr3, V_Number * 4 - call lr0, V_Install - nop - .endm - - .macro Do_InstallX, V_Number, V_Address - const lr4, V_Address - consth lr4, V_Address - const lr3, V_Number * 4 - consth lr3, V_Number * 4 - call lr0, V_InstallX - nop - .endm - - - -; push a register onto the stack - .macro pushreg, reg, sp - sub sp, sp, 4 ; adjust stack pointer - store 0, 0, reg, sp ; push register - .endm - - .macro push, sp, reg - sub sp, sp, 4 - store 0, 0, reg, sp - .endm - -; pop the register from stack - .macro popreg, reg, sp - load 0, 0, reg, sp ; pop register - add sp, sp, 4 ; adjust stack pointer - .endm - .macro pop, reg, sp - load 0, 0, reg, sp - add sp, sp, 4 - .endm - -; push a special register onto stack - .macro pushspcl, spcl, tmpreg, sp - sub sp, sp, 4 ; adjust stack pointer - mfsr tmpreg, spcl ; get spcl reg - store 0, 0, tmpreg, sp ; push onto stack - .endm - - .macro pushsr, sp, reg, sreg - mfsr reg, sreg - sub sp, sp, 4 - store 0, 0, reg, sp - .endm - -; pop a special register from stack - .macro popspcl, spcl, tmpreg, sp - load 0, 0, tmpreg, sp ; pop from stack - add sp, sp, 4 ; adjust stack pointer - mtsr spcl, tmpreg ; set spcl reg - .endm - - .macro popsr, sreg, reg, sp - load 0, 0, reg, sp - add sp, sp, 4 - mtsr sreg, reg - .endm - -; -; save freeze mode registers on memory stack. -; - - .macro SaveFZState, tmp1, tmp2 - - ; save freeze mode registers. - - pushspcl pc0, tmp1, msp - pushspcl pc1, tmp1, msp - pushspcl alu, tmp1, msp - - pushspcl cha, tmp1, msp - pushspcl chd, tmp1, msp - pushspcl chc, tmp1, msp - - pushspcl ops, tmp1, msp - - ; turn freeze off - - const tmp2, FZ - mfsr tmp1, cps - andn tmp1, tmp1, tmp2 - mtsr cps, tmp1 - .endm - -; restore freeze mode registers from memory stack. - - .macro RestoreFZState, tmp1, tmp2 - - ; turn freeze on - - const tmp2, (FZ|DI|DA) - mfsr tmp1, cps - or tmp1, tmp1, tmp2 - mtsr cps, tmp1 - - ; restore freeze mode registers. - - popspcl ops, tmp1, msp - popspcl chc, tmp1, msp - popspcl chd, tmp1, msp - popspcl cha, tmp1, msp - popspcl alu, tmp1, msp - popspcl pc1, tmp1, msp - popspcl pc0, tmp1, msp - .endm - -; -;* -; - .equ WS, 512 ; window size - .equ RALLOC, 4 * 4 ; stack alloc for C - .equ SIGCTX_UM_SIZE, 40 * 4 ; - .equ SIGCTX_RFB, (38) * 4 ; user mode saved - .equ SIGCTX_SM_SIZE, 12 * 4 ; - .equ SIGCTX_SIG, (11)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_GR1, (10)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_RAB, (9)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_PC0, (8)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_PC1, (7)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_PC2, (6)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_CHC, (3)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_OPS, (1)*4 + SIGCTX_UM_SIZE ; - .equ SIGCTX_TAV, (0)*4 + SIGCTX_UM_SIZE ; - - .macro sup_sv - add it2, trapreg, 0 ; transfer signal # - sub msp, msp, 4 ; - store 0, 0, it2, msp ; save signal number - sub msp, msp, 4 ; push gr1 - - store 0, 0, gr1, msp ; - sub msp, msp, 4 ; push rab - store 0, 0, rab, msp ; - const it0, WS ; Window size - - sub rab, rfb, it0 ; set rab = rfb-512 - pushsr msp, it0, PC0 ; save program counter0 - pushsr msp, it0, PC1 ; save program counter1 - pushsr msp, it0, PC2 ; save program counter2 - - pushsr msp, it0, CHA ; save channel address - pushsr msp, it0, CHD ; save channel data - pushsr msp, it0, CHC ; save channel control - pushsr msp, it0, ALU ; save alu - - pushsr msp, it0, OPS ; save ops - sub msp, msp, 4 ; - store 0, 0, tav, msp ; push tav - mtsrim chc, 0 ; no loadm/storem - - mfsr it0, ops ; get ops value - const it1, (TD | DI) ; disable interrupts - consth it1, (TD | DI) ; disable interrupts - or it0, it0, it1 ; set bits - - mtsr ops, it0 ; set new ops - const it0, _sigcode ; signal handler - consth it0, _sigcode ; signal handler - mtsr pc1, it0 ; store pc1 - - add it1, it0, 4 ; next addr - mtsr pc0, it1 ; store pc1 location - iret ; return - nop ; ALIGN - .endm - - .macro sig_return - mfsr it0, cps ; get processor status - const it1, FZ|DA ; Freeze + traps disable - or it0, it0, it1 ; to set FZ+DA - mtsr cps, it0 ; in freeze mode - - load 0, 0, tav, msp ; restore tav - add msp, msp, 4 ; - - popsr OPS,it0, msp ; - popsr ALU,it0, msp ; - popsr CHC,it0, msp ; - popsr CHD,it0, msp ; - - popsr CHA,it0, msp ; - popsr PC2,it0, msp ; - popsr PC1,it0, msp ; - popsr PC0,it0, msp ; - - load 0, 0, rab, msp ; - add msp, msp, 4 ; - load 0, 0, it0, msp ; - add gr1, it0, 0 ; pop rsp - - add msp, msp, 8 ; discount signal # - iret - .endm - - .macro repair_R_stack - add v0, msp, SIGCTX_GR1 ; interrupted gr1 - load 0, 0, v2, v0 ; - add v0, msp, SIGCTX_RFB ; - load 0, 0, v3, v0 ; interupted rfb - - const v1, WS ; - sub v1, v3, v1 ; rfb-512 - cpltu v0, v2, v1 ; test gr1 < rfb-512 - jmpf v0, $1 ; - - add gr1, rab, 0 ; - add v2, v1, 0 ; set LB = rfb-512 -$1: -;* if gr1 < rfb-512 yes LB = rfb-512 signalled during spill -;* if no, LB=gr1 interrupted cache < 126 registers - cpleu v0, v2, rfb ; test LB<=rfb - jmpf v0, $2 ; - nop ; - add v2, rfb, 0 ; -$2: - cpeq v0, v3, rfb ; fill rfb->'rfb - jmpt v0, $3 ; if rfb==rfb' - const tav, (0x80<<2) ; prepare for fill - or tav, tav, v2 ; - - mtsr IPA, tav ; IPA=LA<<2 - sub tav, v3, gr98 ; cache fill LA->rfb - srl tav, tav, 2 ; convert to words - sub tav, tav, 1 ; - - mtsr cr, tav ; - loadm 0, 0, gr0, v2 ; fill from LA->rfb -$3: - add rfb, v3, 0 ; move rfb upto 'rfb - sub rab, v1, 0 ; assign rab to rfb-512 - - add v0, msp, SIGCTX_GR1 ; - load 0, 0, v2, v0 ; v0 = interrupted gr1 - add gr1, v2, 0 ; move gr1 upto 'gr1 - nop ; - .endm - - .macro repair_regs - mtsrim cr, 29 - 1 ; to restore locals - loadm 0, 0, v0, msp ; - add msp, msp, 29*4 ; - popsr Q, tav, msp ; - - popsr IPC, tav, msp ; - popsr IPB, tav, msp ; - popsr IPA, tav, msp ; - pop FPStat3, msp ; floating point regs - - pop FPStat2, msp ; floating point regs - pop FPStat1, msp ; floating point regs - pop FPStat0, msp ; floating point regs - - add msp, msp, 3*4 ; R-stack repaired - .endm - -; -;*HIF related... -; - - - - -; send the message in bufaddr to Montip. - .macro SendMessageToMontip, bufaddr - const lr2, bufaddr -$1: - call lr0, _msg_send - consth lr2, bufaddr - cpeq gr96, gr96, 0 - jmpf gr96, $1 - const lr2, bufaddr - .endm - -; build a HIF_CALL message in bufaddr to send to montip. - .macro BuildHIFCALLMsg, bufaddr, tmp1, tmp2 - const tmp1, bufaddr - consth tmp1, bufaddr - const tmp2, HIF_CALL_MSGCODE - store 0, 0, tmp2, tmp1 ; msg code - add tmp1, tmp1, 4 - const tmp2, HIF_CALL_MSGLEN - store 0, 0, tmp2, tmp1 ; msg len - add tmp1, tmp1, 4 - store 0, 0, gr121, tmp1 ; service number - add tmp1, tmp1, 4 - store 0, 0, lr2, tmp1 ; lr2 - add tmp1, tmp1, 4 - store 0, 0, lr3, tmp1 ; lr3 - add tmp1, tmp1, 4 - store 0, 0, lr4, tmp1 ; lr4 - .endm - -; -;* -;* All the funky AMD style macros go in here...simply for -;* compatility -; -; - .macro IMPORT, symbol - .extern symbol - .endm - - .macro GLOBAL, symbol - .global symbol - .endm - - .macro USESECT, name, type - .sect name, type - .use name - .endm - - .macro SECTION, name, type - .sect name, type - .endm - - .macro FUNC, fname, lineno - .global fname -fname: - .endm - - .macro ENDFUNC, fname, lineno - .endm - -;*************************************LONG - .macro LONG, varname -varname: - .block 4 - .endm - -;*************************************UNSIGNED LONG - .macro ULONG, varname -varname: - .block 4 - .endm - -;*************************************SHORT - .macro SHORT, varname -varname: - .block 2 - .endm - -;*************************************CHAR - .macro CHAR, varname -varname: - .block 1 - .endm - -;*************************************LONGARRAY - .macro LONGARRAY, name, count -name: - .block count*4 - .endm - -;*************************************SHORTARRAY - - .macro SHORTARRAY, name, count -name: - .block count*2 - .endm - -;*************************************CHARARRAY - - .macro CHARARRAY, name, count -name: - .block count - .endm - - -;*************************************VOID_FPTR - - .macro VOID_FPTR, name -name: - .block 4 - .endm diff --git a/cpukit/score/cpu/a29k/register.ah b/cpukit/score/cpu/a29k/register.ah deleted file mode 100644 index 35142b508f..0000000000 --- a/cpukit/score/cpu/a29k/register.ah +++ /dev/null @@ -1,214 +0,0 @@ -; /* @(#)register.ah 1.1 96/05/23 08:56:57, TEI */ -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; naming of various registers -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; /* $Id$ */ - -;* File information and includes. - - .file "register.ah" - .ident "@(#)register.ah 1.1 96/05/23 08:56:57, TEI\n" - -;* Register Stack pointer and frame pointer registers. - - .extern Rrsp, Rfp - - .reg regsp, %%Rrsp - .reg fp, %%Rfp - - - .extern RTrapReg - .extern Rtrapreg - - .reg TrapReg, %%RTrapReg - .reg trapreg, %%Rtrapreg - - -;* Operating system Interrupt handler registers (gr64-gr67) - - .extern ROSint0, ROSint1, ROSint2, ROSint3 - - .reg OSint0, %%ROSint0 - .reg OSint1, %%ROSint1 - .reg OSint2, %%ROSint2 - .reg OSint3, %%ROSint3 - - .reg it0, %%ROSint0 - .reg it1, %%ROSint1 - .reg it2, %%ROSint2 - .reg it3, %%ROSint3 - - - -;* Operating system temporary (or scratch) registers (gr68-gr79) - - .extern ROStmp0, ROStmp1, ROStmp2, ROStmp3 - .extern ROStmp4, ROStmp5, ROStmp6, ROStmp7 - .extern ROStmp8, ROStmp9, ROStmp10, ROStmp11 - - .reg OStmp0, %%ROStmp0 - .reg OStmp1, %%ROStmp1 - .reg OStmp2, %%ROStmp2 - .reg OStmp3, %%ROStmp3 - - .reg OStmp4, %%ROStmp4 - .reg OStmp5, %%ROStmp5 - .reg OStmp6, %%ROStmp6 - .reg OStmp7, %%ROStmp7 - - .reg OStmp8, %%ROStmp8 - .reg OStmp9, %%ROStmp9 - .reg OStmp10, %%ROStmp10 - .reg OStmp11, %%ROStmp11 - - - .reg kt0, %%ROStmp0 - .reg kt1, %%ROStmp1 - .reg kt2, %%ROStmp2 - .reg kt3, %%ROStmp3 - - .reg kt4, %%ROStmp4 - .reg kt5, %%ROStmp5 - .reg kt6, %%ROStmp6 - .reg kt7, %%ROStmp7 - - .reg kt8, %%ROStmp8 - .reg kt9, %%ROStmp9 - .reg kt10, %%ROStmp10 - .reg kt11, %%ROStmp11 - - - .reg TempReg0, %%ROSint0 - .reg TempReg1, %%ROSint1 - .reg TempReg2, %%ROSint2 - .reg TempReg3, %%ROSint3 - - .reg TempReg4, %%ROStmp0 - .reg TempReg5, %%ROStmp1 - .reg TempReg6, %%ROStmp2 - .reg TempReg7, %%ROStmp3 - - .reg TempReg8, %%ROStmp4 - .reg TempReg9, %%ROStmp5 - .reg TempReg10, %%ROStmp6 - .reg TempReg11, %%ROStmp7 - - .reg TempReg12, %%ROStmp8 - .reg TempReg13, %%ROStmp9 - .reg TempReg14, %%ROStmp10 - .reg TempReg15, %%ROStmp11 - - -;* Assigned static registers - - .extern RSpillAddrReg, RFillAddrReg, RSignalAddrReg - .extern Rpcb, Retc - .extern RTimerExt, RTimerUtil, RLEDReg, RERRReg - .extern Ret0, Ret1, Ret2, Ret3, Ret4, Ret5, Ret6, Ret7, Reta, Retb - .extern Retx, Rety, Retz - - - .reg SpillAddrReg, %%RSpillAddrReg - .reg FillAddrReg, %%RFillAddrReg - .reg SignalAddrReg, %%RSignalAddrReg - .reg pcb, %%Rpcb - - .reg etx, %%Retx - .reg ety, %%Rety - .reg etz, %%Retz - .reg eta, %%Reta - - .reg etb, %%Retb - .reg etc, %%Retc - .reg TimerExt, %%RTimerExt - .reg TimerUtil, %%RTimerUtil - - .reg LEDReg, %%RLEDReg - .reg ERRReg, %%RERRReg - - - .reg et0, %%Ret0 - .reg et1, %%Ret1 - .reg et2, %%Ret2 - .reg et3, %%Ret3 - - .reg et4, %%Ret4 - .reg et5, %%Ret5 - .reg et6, %%Ret6 - .reg et7, %%Ret7 - -; - .equ SCB1REG_NUM, 88 - .reg SCB1REG_PTR, %%Ret0 - -; The floating point trap handlers need a few static registers - - .extern RFPStat0, RFPStat1, RFPStat2, RFPStat3 - .extern Rheapptr, RHeapPtr, RArgvPtr - - .reg FPStat0, %%RFPStat0 - .reg FPStat1, %%RFPStat1 - .reg FPStat2, %%RFPStat2 - .reg FPStat3, %%RFPStat3 - - .reg heapptr, %%Rheapptr - .reg HeapPtr, %%RHeapPtr - .reg ArgvPtr, %%RArgvPtr - - .extern RXLINXReg, RVMBCReg, RUARTReg, RETHERReg - - .reg XLINXReg, %%RXLINXReg - .reg VMBCReg, %%RVMBCReg - .reg UARTReg, %%RUARTReg - .reg ETHERReg, %%RXLINXReg - -;* Compiler and programmer registers. (gr96-gr127) - - .extern Rv0, Rv1, Rv2, Rv3, Rv4, Rv5, Rv6, Rv7, Rv8, Rv9 - .extern Rv10, Rv11, Rv12, Rv13, Rv14, Rv15 - - .reg v0, %%Rv0 - .reg v1, %%Rv1 - .reg v2, %%Rv2 - .reg v3, %%Rv3 - - .reg v4, %%Rv4 - .reg v5, %%Rv5 - .reg v6, %%Rv6 - .reg v7, %%Rv7 - - .reg v8, %%Rv8 - .reg v9, %%Rv9 - .reg v10, %%Rv10 - .reg v11, %%Rv11 - - .reg v12, %%Rv12 - .reg v13, %%Rv13 - .reg v14, %%Rv14 - .reg v15, %%Rv15 - - .extern Rtv0, Rtv1, Rtv2, Rtv3, Rtv4 - - .reg tv0, %%Rtv0 - .reg tv1, %%Rtv1 - .reg tv2, %%Rtv2 - .reg tv3, %%Rtv3 - .reg tv4, %%Rtv4 - -; **************************************************************************** -; For uatrap -; register definitions -- since this trap handler must allow for -; nested traps and interrupts such as TLB miss, protection violation, -; or Data Access Exception, and these trap handlers use the shared -; Temp registers, we must maintain our own that are safe over user- -; mode loads and stores. The following must be assigned global -; registers which are not used in INTR[0-3], TRAP[0-1], TLB miss, -; TLB protection violation, or data exception trap handlers. - -; .reg cha_cpy, OStmp4 ; copy of CHA -; .reg chd_cpy, OStmp5 ; copy of CHD -; .reg chc_cpy, OStmp6 ; copy of CHC -; .reg LTemp0, OStmp7 ; local temp 0 -; .reg LTemp1, OStmp8 ; local temp 1 - -; **************************************************************************** |