From 66fffc747336e40ca78957dcea073fb9c4ec9e39 Mon Sep 17 00:00:00 2001 From: Alex Ivanov Date: Tue, 8 Jan 2013 09:22:33 -0600 Subject: score: Doxygen Clean Up Task #15 --- cpukit/score/cpu/arm/rtems/asm.h | 22 +- cpukit/score/cpu/arm/rtems/score/arm.h | 4 +- cpukit/score/cpu/arm/rtems/score/armv7m.h | 9 +- cpukit/score/cpu/arm/rtems/score/cpu.h | 10 +- cpukit/score/cpu/arm/rtems/score/cpu_asm.h | 2 +- cpukit/score/cpu/arm/rtems/score/types.h | 4 +- cpukit/score/cpu/m32r/rtems/asm.h | 58 +- cpukit/score/cpu/m32r/rtems/score/cpu.h | 1244 ++++++++++++++------------- cpukit/score/cpu/m32r/rtems/score/cpu_asm.h | 12 +- cpukit/score/cpu/m32r/rtems/score/m32r.h | 16 +- cpukit/score/cpu/m32r/rtems/score/types.h | 10 +- cpukit/score/cpu/m68k/rtems/asm.h | 21 +- cpukit/score/cpu/m68k/rtems/m68k/m68302.h | 10 +- cpukit/score/cpu/m68k/rtems/m68k/m68360.h | 17 +- cpukit/score/cpu/m68k/rtems/m68k/qsm.h | 10 +- cpukit/score/cpu/m68k/rtems/m68k/sim.h | 10 +- cpukit/score/cpu/m68k/rtems/score/cpu.h | 10 +- cpukit/score/cpu/m68k/rtems/score/m68k.h | 10 +- cpukit/score/cpu/m68k/rtems/score/types.h | 10 +- cpukit/score/cpu/v850/rtems/score/cpu_asm.h | 13 +- 20 files changed, 769 insertions(+), 733 deletions(-) diff --git a/cpukit/score/cpu/arm/rtems/asm.h b/cpukit/score/cpu/arm/rtems/asm.h index e6951dbb28..affb2e8f50 100644 --- a/cpukit/score/cpu/arm/rtems/asm.h +++ b/cpukit/score/cpu/arm/rtems/asm.h @@ -1,21 +1,17 @@ /** * @file * - * @ingroup ScoreCPU + * @brief ARM Assembler Support API * - * @brief ARM assembler support API. - */ - -/* - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. + * This include file attempts to address the problems + * caused by incompatible flavors of assemblers and + * toolsets. It primarily addresses variations in the + * use of leading underscores on symbols and the requirement + * that register names be preceded by a %. * * - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. + * NOTE: The spacing in the use of these macros + * is critical to them working as advertised. */ /* @@ -53,7 +49,7 @@ * * @ingroup ScoreCPU * - * @brief ARM assembler support. + * @brief ARM Assembler Support * * @{ */ diff --git a/cpukit/score/cpu/arm/rtems/score/arm.h b/cpukit/score/cpu/arm/rtems/score/arm.h index c4f7cf2324..96652fa5f3 100644 --- a/cpukit/score/cpu/arm/rtems/score/arm.h +++ b/cpukit/score/cpu/arm/rtems/score/arm.h @@ -1,9 +1,7 @@ /** * @file * - * @ingroup ScoreCPU - * - * @brief ARM assembler support API. + * @brief ARM Assembler Support API */ /* diff --git a/cpukit/score/cpu/arm/rtems/score/armv7m.h b/cpukit/score/cpu/arm/rtems/score/armv7m.h index 9b56f797c7..3a41a0c707 100644 --- a/cpukit/score/cpu/arm/rtems/score/armv7m.h +++ b/cpukit/score/cpu/arm/rtems/score/armv7m.h @@ -1,3 +1,9 @@ +/** + * @file + * + * @brief ARMV7M Architecture Support + */ + /* * Copyright (c) 2011 Sebastian Huber. All rights reserved. * @@ -474,8 +480,7 @@ void _ARMV7M_Set_exception_handler( ); /** - * @brief ARMV7M Set Exception Priority and Handler - * + * @brief ARMV7M set exception priority and handler. */ void _ARMV7M_Set_exception_priority_and_handler( int index, diff --git a/cpukit/score/cpu/arm/rtems/score/cpu.h b/cpukit/score/cpu/arm/rtems/score/cpu.h index 008311244c..18938443ef 100644 --- a/cpukit/score/cpu/arm/rtems/score/cpu.h +++ b/cpukit/score/cpu/arm/rtems/score/cpu.h @@ -1,9 +1,7 @@ /** * @file * - * @ingroup ScoreCPU - * - * @brief ARM architecture support API. + * @brief ARM Architecture Support API */ /* @@ -399,8 +397,7 @@ void _CPU_Context_Initialize( } while (0); /** - * @brief CPU Initialize - * + * @brief CPU initialization. */ void _CPU_Initialize( void ); @@ -411,8 +408,7 @@ void _CPU_ISR_install_vector( ); /** - * @brief CPU Context Switch - * + * @brief CPU switch context. */ void _CPU_Context_switch( Context_Control *run, Context_Control *heir ); diff --git a/cpukit/score/cpu/arm/rtems/score/cpu_asm.h b/cpukit/score/cpu/arm/rtems/score/cpu_asm.h index 16c40125ec..59bfae079f 100644 --- a/cpukit/score/cpu/arm/rtems/score/cpu_asm.h +++ b/cpukit/score/cpu/arm/rtems/score/cpu_asm.h @@ -3,7 +3,7 @@ * * @ingroup ScoreCPU * - * @brief ARM assembler support API. + * @brief ARM Assembler Support API */ /* diff --git a/cpukit/score/cpu/arm/rtems/score/types.h b/cpukit/score/cpu/arm/rtems/score/types.h index f6de605b89..8b4b7f95e2 100644 --- a/cpukit/score/cpu/arm/rtems/score/types.h +++ b/cpukit/score/cpu/arm/rtems/score/types.h @@ -1,9 +1,7 @@ /** * @file * - * @ingroup ScoreCPU - * - * @brief ARM architecture types API. + * @brief ARM Architecture Types API */ /* diff --git a/cpukit/score/cpu/m32r/rtems/asm.h b/cpukit/score/cpu/m32r/rtems/asm.h index cd258c513b..11f5b876b9 100644 --- a/cpukit/score/cpu/m32r/rtems/asm.h +++ b/cpukit/score/cpu/m32r/rtems/asm.h @@ -1,17 +1,20 @@ /** - * @file rtems/asm.h + * @file * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. + * @brief Address the Problems Caused by Incompatible Flavor of + * Assemblers and Toolsets + * + * This include file attempts to address the problems + * caused by incompatible flavors of assemblers and + * toolsets. It primarily addresses variations in the + * use of leading underscores on symbols and the requirement + * that register names be preceded by a %. + * + * NOTE: The spacing in the use of these macros + * is critical to them working as advertised. */ /* - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * * COPYRIGHT: * * This file is based on similar code found in newlib available @@ -38,24 +41,24 @@ #ifndef __USER_LABEL_PREFIX__ /** - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. + * Recent versions of GNU cpp define variables which indicate the + * need for underscores and percents. If not using GNU cpp or + * the version does not support this, then you will obviously + * have to define these as appropriate. * - * This symbol is prefixed to all C program symbols. + * This symbol is prefixed to all C program symbols. */ #define __USER_LABEL_PREFIX__ _ #endif #ifndef __REGISTER_PREFIX__ /** - * Recent versions of GNU cpp define variables which indicate the - * need for underscores and percents. If not using GNU cpp or - * the version does not support this, then you will obviously - * have to define these as appropriate. + * Recent versions of GNU cpp define variables which indicate the + * need for underscores and percents. If not using GNU cpp or + * the version does not support this, then you will obviously + * have to define these as appropriate. * - * This symbol is prefixed to all register names. + * This symbol is prefixed to all register names. */ #define __REGISTER_PREFIX__ #endif @@ -95,8 +98,9 @@ #define BEGIN_DATA /** This macro is used to denote the end of a data section. */ #define END_DATA -/** This macro is used to denote the beginning of the - * unitialized data section. +/** + * This macro is used to denote the beginning of the + * unitialized data section. */ #define BEGIN_BSS /** This macro is used to denote the end of the unitialized data section. */ @@ -105,18 +109,18 @@ #define END /** - * This macro is used to declare a public global symbol. + * This macro is used to declare a public global symbol. * - * @note This must be tailored for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. + * NOTE: This must be tailored for a particular flavor of the C compiler. + * They may need to put underscores in front of the symbols. */ #define PUBLIC(sym) .globl SYM (sym) /** - * This macro is used to prototype a public global symbol. + * This macro is used to prototype a public global symbol. * - * @note This must be tailored for a particular flavor of the C compiler. - * They may need to put underscores in front of the symbols. + * NOTE: This must be tailored for a particular flavor of the C compiler. + * They may need to put underscores in front of the symbols. */ #define EXTERN(sym) .globl SYM (sym) diff --git a/cpukit/score/cpu/m32r/rtems/score/cpu.h b/cpukit/score/cpu/m32r/rtems/score/cpu.h index d6886ffefc..cb4ebe7ae9 100644 --- a/cpukit/score/cpu/m32r/rtems/score/cpu.h +++ b/cpukit/score/cpu/m32r/rtems/score/cpu.h @@ -1,22 +1,22 @@ /** - * @file rtems/score/cpu.h - */ - -/* - * This include file contains information pertaining to the XXX - * processor. + * @file + * + * @brief Intel M32R CPU Dependent Source + * + * This include file contains information pertaining to the XXX + * processor. * - * @note This file is part of a porting template that is intended - * to be used as the starting point when porting RTEMS to a new - * CPU family. The following needs to be done when using this as - * the starting point for a new port: + * NOTE: This file is part of a porting template that is intended + * to be used as the starting point when porting RTEMS to a new + * CPU family. The following needs to be done when using this as + * the starting point for a new port: * - * + Anywhere there is an XXX, it should be replaced - * with information about the CPU family being ported to. + * + Anywhere there is an XXX, it should be replaced + * with information about the CPU family being ported to. * - * + At the end of each comment section, there is a heading which - * says "Port Specific Information:". When porting to RTEMS, - * add CPU family specific information in this section + * + At the end of each comment section, there is a heading which + * says "Port Specific Information:". When porting to RTEMS, + * add CPU family specific information in this section */ /* @@ -41,172 +41,172 @@ extern "C" { /* conditional compilation parameters */ /** - * Should the calls to @ref _Thread_Enable_dispatch be inlined? + * Should the calls to @ref _Thread_Enable_dispatch be inlined? * - * If TRUE, then they are inlined. - * If FALSE, then a subroutine call is made. + * If TRUE, then they are inlined. + * If FALSE, then a subroutine call is made. * - * This conditional is an example of the classic trade-off of size - * versus speed. Inlining the call (TRUE) typically increases the - * size of RTEMS while speeding up the enabling of dispatching. + * This conditional is an example of the classic trade-off of size + * versus speed. Inlining the call (TRUE) typically increases the + * size of RTEMS while speeding up the enabling of dispatching. * - * @note In general, the @ref _Thread_Dispatch_disable_level will - * only be 0 or 1 unless you are in an interrupt handler and that - * interrupt handler invokes the executive.] When not inlined - * something calls @ref _Thread_Enable_dispatch which in turns calls - * @ref _Thread_Dispatch. If the enable dispatch is inlined, then - * one subroutine call is avoided entirely. + * NOTE: In general, the @ref _Thread_Dispatch_disable_level will + * only be 0 or 1 unless you are in an interrupt handler and that + * interrupt handler invokes the executive.] When not inlined + * something calls @ref _Thread_Enable_dispatch which in turns calls + * @ref _Thread_Dispatch. If the enable dispatch is inlined, then + * one subroutine call is avoided entirely. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_INLINE_ENABLE_DISPATCH FALSE /** - * Should the body of the search loops in _Thread_queue_Enqueue_priority - * be unrolled one time? In unrolled each iteration of the loop examines - * two "nodes" on the chain being searched. Otherwise, only one node - * is examined per iteration. + * Should the body of the search loops in _Thread_queue_Enqueue_priority + * be unrolled one time? In unrolled each iteration of the loop examines + * two "nodes" on the chain being searched. Otherwise, only one node + * is examined per iteration. * - * If TRUE, then the loops are unrolled. - * If FALSE, then the loops are not unrolled. + * If TRUE, then the loops are unrolled. + * If FALSE, then the loops are not unrolled. * - * The primary factor in making this decision is the cost of disabling - * and enabling interrupts (_ISR_Flash) versus the cost of rest of the - * body of the loop. On some CPUs, the flash is more expensive than - * one iteration of the loop body. In this case, it might be desirable - * to unroll the loop. It is important to note that on some CPUs, this - * code is the longest interrupt disable period in RTEMS. So it is - * necessary to strike a balance when setting this parameter. + * The primary factor in making this decision is the cost of disabling + * and enabling interrupts (_ISR_Flash) versus the cost of rest of the + * body of the loop. On some CPUs, the flash is more expensive than + * one iteration of the loop body. In this case, it might be desirable + * to unroll the loop. It is important to note that on some CPUs, this + * code is the longest interrupt disable period in RTEMS. So it is + * necessary to strike a balance when setting this parameter. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_UNROLL_ENQUEUE_PRIORITY TRUE /** - * Does RTEMS manage a dedicated interrupt stack in software? + * Does RTEMS manage a dedicated interrupt stack in software? * - * If TRUE, then a stack is allocated in @ref _ISR_Handler_initialization. - * If FALSE, nothing is done. + * If TRUE, then a stack is allocated in @ref _ISR_Handler_initialization. + * If FALSE, nothing is done. * - * If the CPU supports a dedicated interrupt stack in hardware, - * then it is generally the responsibility of the BSP to allocate it - * and set it up. + * If the CPU supports a dedicated interrupt stack in hardware, + * then it is generally the responsibility of the BSP to allocate it + * and set it up. * - * If the CPU does not support a dedicated interrupt stack, then - * the porter has two options: (1) execute interrupts on the - * stack of the interrupted task, and (2) have RTEMS manage a dedicated - * interrupt stack. + * If the CPU does not support a dedicated interrupt stack, then + * the porter has two options: (1) execute interrupts on the + * stack of the interrupted task, and (2) have RTEMS manage a dedicated + * interrupt stack. * - * If this is TRUE, @ref CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. + * If this is TRUE, @ref CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. * - * Only one of @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * @ref CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. + * Only one of @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK and + * @ref CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is + * possible that both are FALSE for a particular CPU. Although it + * is unclear what that would imply about the interrupt processing + * procedure on that CPU. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE /** - * Does the CPU follow the simple vectored interrupt model? + * Does the CPU follow the simple vectored interrupt model? * - * If TRUE, then RTEMS allocates the vector table it internally manages. - * If FALSE, then the BSP is assumed to allocate and manage the vector - * table + * If TRUE, then RTEMS allocates the vector table it internally manages. + * If FALSE, then the BSP is assumed to allocate and manage the vector + * table * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_SIMPLE_VECTORED_INTERRUPTS TRUE /** - * Does this CPU have hardware support for a dedicated interrupt stack? + * Does this CPU have hardware support for a dedicated interrupt stack? * - * If TRUE, then it must be installed during initialization. - * If FALSE, then no installation is performed. + * If TRUE, then it must be installed during initialization. + * If FALSE, then no installation is performed. * - * If this is TRUE, @ref CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. + * If this is TRUE, @ref CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. * - * Only one of @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK and - * @ref CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is - * possible that both are FALSE for a particular CPU. Although it - * is unclear what that would imply about the interrupt processing - * procedure on that CPU. + * Only one of @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK and + * @ref CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is + * possible that both are FALSE for a particular CPU. Although it + * is unclear what that would imply about the interrupt processing + * procedure on that CPU. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_HAS_HARDWARE_INTERRUPT_STACK TRUE /** - * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? + * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? * - * If TRUE, then the memory is allocated during initialization. - * If FALSE, then the memory is allocated during initialization. + * If TRUE, then the memory is allocated during initialization. + * If FALSE, then the memory is allocated during initialization. * - * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE. + * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_ALLOCATE_INTERRUPT_STACK TRUE /** - * Does the RTEMS invoke the user's ISR with the vector number and - * a pointer to the saved interrupt frame (1) or just the vector - * number (0)? + * Does the RTEMS invoke the user's ISR with the vector number and + * a pointer to the saved interrupt frame (1) or just the vector + * number (0)? * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_ISR_PASSES_FRAME_POINTER 0 /** - * @def CPU_HARDWARE_FP + * @def CPU_HARDWARE_FP * - * Does the CPU have hardware floating point? + * Does the CPU have hardware floating point? * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. + * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. + * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. * - * If there is a FP coprocessor such as the i387 or mc68881, then - * the answer is TRUE. + * If there is a FP coprocessor such as the i387 or mc68881, then + * the answer is TRUE. * - * The macro name "M32R_HAS_FPU" should be made CPU specific. - * It indicates whether or not this CPU model has FP support. For - * example, it would be possible to have an i386_nofp CPU model - * which set this to false to indicate that you have an i386 without - * an i387 and wish to leave floating point support out of RTEMS. + * The macro name "M32R_HAS_FPU" should be made CPU specific. + * It indicates whether or not this CPU model has FP support. For + * example, it would be possible to have an i386_nofp CPU model + * which set this to false to indicate that you have an i386 without + * an i387 and wish to leave floating point support out of RTEMS. */ /** - * @def CPU_SOFTWARE_FP + * @def CPU_SOFTWARE_FP * - * Does the CPU have no hardware floating point and GCC provides a - * software floating point implementation which must be context - * switched? + * Does the CPU have no hardware floating point and GCC provides a + * software floating point implementation which must be context + * switched? * - * This feature conditional is used to indicate whether or not there - * is software implemented floating point that must be context - * switched. The determination of whether or not this applies - * is very tool specific and the state saved/restored is also - * compiler specific. + * This feature conditional is used to indicate whether or not there + * is software implemented floating point that must be context + * switched. The determination of whether or not this applies + * is very tool specific and the state saved/restored is also + * compiler specific. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #if ( M32R_HAS_FPU == 1 ) #define CPU_HARDWARE_FP TRUE @@ -216,201 +216,203 @@ extern "C" { #define CPU_SOFTWARE_FP FALSE /** - * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? + * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? * - * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. - * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. + * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. + * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. * - * So far, the only CPUs in which this option has been used are the - * HP PA-RISC and PowerPC. On the PA-RISC, The HP C compiler and - * gcc both implicitly used the floating point registers to perform - * integer multiplies. Similarly, the PowerPC port of gcc has been - * seen to allocate floating point local variables and touch the FPU - * even when the flow through a subroutine (like vfprintf()) might - * not use floating point formats. + * So far, the only CPUs in which this option has been used are the + * HP PA-RISC and PowerPC. On the PA-RISC, The HP C compiler and + * gcc both implicitly used the floating point registers to perform + * integer multiplies. Similarly, the PowerPC port of gcc has been + * seen to allocate floating point local variables and touch the FPU + * even when the flow through a subroutine (like vfprintf()) might + * not use floating point formats. * - * If a function which you would not think utilize the FP unit DOES, - * then one can not easily predict which tasks will use the FP hardware. - * In this case, this option should be TRUE. + * If a function which you would not think utilize the FP unit DOES, + * then one can not easily predict which tasks will use the FP hardware. + * In this case, this option should be TRUE. * - * If @ref CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. + * If @ref CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_ALL_TASKS_ARE_FP TRUE /** - * Should the IDLE task have a floating point context? + * Should the IDLE task have a floating point context? * - * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task - * and it has a floating point context which is switched in and out. - * If FALSE, then the IDLE task does not have a floating point context. + * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task + * and it has a floating point context which is switched in and out. + * If FALSE, then the IDLE task does not have a floating point context. * - * Setting this to TRUE negatively impacts the time required to preempt - * the IDLE task from an interrupt because the floating point context - * must be saved as part of the preemption. + * Setting this to TRUE negatively impacts the time required to preempt + * the IDLE task from an interrupt because the floating point context + * must be saved as part of the preemption. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_IDLE_TASK_IS_FP FALSE /** - * Should the saving of the floating point registers be deferred - * until a context switch is made to another different floating point - * task? + * Should the saving of the floating point registers be deferred + * until a context switch is made to another different floating point + * task? * - * If TRUE, then the floating point context will not be stored until - * necessary. It will remain in the floating point registers and not - * disturned until another floating point task is switched to. + * If TRUE, then the floating point context will not be stored until + * necessary. It will remain in the floating point registers and not + * disturned until another floating point task is switched to. * - * If FALSE, then the floating point context is saved when a floating - * point task is switched out and restored when the next floating point - * task is restored. The state of the floating point registers between - * those two operations is not specified. + * If FALSE, then the floating point context is saved when a floating + * point task is switched out and restored when the next floating point + * task is restored. The state of the floating point registers between + * those two operations is not specified. * - * If the floating point context does NOT have to be saved as part of - * interrupt dispatching, then it should be safe to set this to TRUE. + * If the floating point context does NOT have to be saved as part of + * interrupt dispatching, then it should be safe to set this to TRUE. * - * Setting this flag to TRUE results in using a different algorithm - * for deciding when to save and restore the floating point context. - * The deferred FP switch algorithm minimizes the number of times - * the FP context is saved and restored. The FP context is not saved - * until a context switch is made to another, different FP task. - * Thus in a system with only one FP task, the FP context will never - * be saved or restored. + * Setting this flag to TRUE results in using a different algorithm + * for deciding when to save and restore the floating point context. + * The deferred FP switch algorithm minimizes the number of times + * the FP context is saved and restored. The FP context is not saved + * until a context switch is made to another, different FP task. + * Thus in a system with only one FP task, the FP context will never + * be saved or restored. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_USE_DEFERRED_FP_SWITCH TRUE /** - * Does this port provide a CPU dependent IDLE task implementation? + * Does this port provide a CPU dependent IDLE task implementation? * - * If TRUE, then the routine @ref _CPU_Thread_Idle_body - * must be provided and is the default IDLE thread body instead of - * @ref _CPU_Thread_Idle_body. + * If TRUE, then the routine @ref _CPU_Thread_Idle_body + * must be provided and is the default IDLE thread body instead of + * @ref _CPU_Thread_Idle_body. * - * If FALSE, then use the generic IDLE thread body if the BSP does - * not provide one. + * If FALSE, then use the generic IDLE thread body if the BSP does + * not provide one. * - * This is intended to allow for supporting processors which have - * a low power or idle mode. When the IDLE thread is executed, then - * the CPU can be powered down. + * This is intended to allow for supporting processors which have + * a low power or idle mode. When the IDLE thread is executed, then + * the CPU can be powered down. * - * The order of precedence for selecting the IDLE thread body is: + * The order of precedence for selecting the IDLE thread body is: * - * -# BSP provided - * -# CPU dependent (if provided) - * -# generic (if no BSP and no CPU dependent) + * -# BSP provided + * -# CPU dependent (if provided) + * -# generic (if no BSP and no CPU dependent) * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_PROVIDES_IDLE_THREAD_BODY FALSE /** - * Does the stack grow up (toward higher addresses) or down - * (toward lower addresses)? + * Does the stack grow up (toward higher addresses) or down + * (toward lower addresses)? * - * If TRUE, then the grows upward. - * If FALSE, then the grows toward smaller addresses. + * If TRUE, then the grows upward. + * If FALSE, then the grows toward smaller addresses. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_STACK_GROWS_UP TRUE /** - * The following is the variable attribute used to force alignment - * of critical RTEMS structures. On some processors it may make - * sense to have these aligned on tighter boundaries than - * the minimum requirements of the compiler in order to have as - * much of the critical data area as possible in a cache line. + * The following is the variable attribute used to force alignment + * of critical RTEMS structures. On some processors it may make + * sense to have these aligned on tighter boundaries than + * the minimum requirements of the compiler in order to have as + * much of the critical data area as possible in a cache line. * - * The placement of this macro in the declaration of the variables - * is based on the syntactically requirements of the GNU C - * "__attribute__" extension. For example with GNU C, use - * the following to force a structures to a 32 byte boundary. + * The placement of this macro in the declaration of the variables + * is based on the syntactically requirements of the GNU C + * "__attribute__" extension. For example with GNU C, use + * the following to force a structures to a 32 byte boundary. * - * __attribute__ ((aligned (32))) + * __attribute__ ((aligned (32))) * - * @note Currently only the Priority Bit Map table uses this feature. - * To benefit from using this, the data must be heavily - * used so it will stay in the cache and used frequently enough - * in the executive to justify turning this on. + * NOTE: Currently only the Priority Bit Map table uses this feature. + * To benefit from using this, the data must be heavily + * used so it will stay in the cache and used frequently enough + * in the executive to justify turning this on. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_STRUCTURE_ALIGNMENT #define CPU_TIMESTAMP_USE_STRUCT_TIMESPEC TRUE /** - * @defgroup CPUEndian Processor Dependent Endianness Support + * @defgroup CPUEndian Processor Dependent Endianness Support + * + * This group assists in issues related to processor endianness. * - * This group assists in issues related to processor endianness. + * @{ */ /** - * @ingroup CPUEndian - * Define what is required to specify how the network to host conversion - * routines are handled. + * Define what is required to specify how the network to host conversion + * routines are handled. * - * @note @a CPU_BIG_ENDIAN and @a CPU_LITTLE_ENDIAN should NOT have the - * same values. + * NOTE: @a CPU_BIG_ENDIAN and @a CPU_LITTLE_ENDIAN should NOT have the + * same values. * - * @see CPU_LITTLE_ENDIAN + * @see CPU_LITTLE_ENDIAN * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_BIG_ENDIAN TRUE /** - * @ingroup CPUEndian - * Define what is required to specify how the network to host conversion - * routines are handled. + * Define what is required to specify how the network to host conversion + * routines are handled. * - * @note @ref CPU_BIG_ENDIAN and @ref CPU_LITTLE_ENDIAN should NOT have the - * same values. + * NOTE: @ref CPU_BIG_ENDIAN and @ref CPU_LITTLE_ENDIAN should NOT have the + * same values. * - * @see CPU_BIG_ENDIAN + * @see CPU_BIG_ENDIAN * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_LITTLE_ENDIAN FALSE +/** @} */ + /** - * @ingroup CPUInterrupt - * The following defines the number of bits actually used in the - * interrupt field of the task mode. How those bits map to the - * CPU interrupt levels is defined by the routine @ref _CPU_ISR_Set_level. + * @ingroup CPUInterrupt + * The following defines the number of bits actually used in the + * interrupt field of the task mode. How those bits map to the + * CPU interrupt levels is defined by the routine @ref _CPU_ISR_Set_level. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_MODES_INTERRUPT_MASK 0x00000001 /* - * Processor defined structures required for cpukit/score. + * Processor defined structures required for cpukit/score. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ /* may need to put some structures here. */ @@ -418,50 +420,51 @@ extern "C" { /** * @defgroup CPUContext Processor Dependent Context Management * - * From the highest level viewpoint, there are 2 types of context to save. + * From the highest level viewpoint, there are 2 types of context to save. * - * -# Interrupt registers to save - * -# Task level registers to save + * -# Interrupt registers to save + * -# Task level registers to save * - * Since RTEMS handles integer and floating point contexts separately, this - * means we have the following 3 context items: + * Since RTEMS handles integer and floating point contexts separately, this + * means we have the following 3 context items: * - * -# task level context stuff:: Context_Control - * -# floating point task stuff:: Context_Control_fp - * -# special interrupt level context :: CPU_Interrupt_frame + * -# task level context stuff:: Context_Control + * -# floating point task stuff:: Context_Control_fp + * -# special interrupt level context :: CPU_Interrupt_frame * - * On some processors, it is cost-effective to save only the callee - * preserved registers during a task context switch. This means - * that the ISR code needs to save those registers which do not - * persist across function calls. It is not mandatory to make this - * distinctions between the caller/callee saves registers for the - * purpose of minimizing context saved during task switch and on interrupts. - * If the cost of saving extra registers is minimal, simplicity is the - * choice. Save the same context on interrupt entry as for tasks in - * this case. + * On some processors, it is cost-effective to save only the callee + * preserved registers during a task context switch. This means + * that the ISR code needs to save those registers which do not + * persist across function calls. It is not mandatory to make this + * distinctions between the caller/callee saves registers for the + * purpose of minimizing context saved during task switch and on interrupts. + * If the cost of saving extra registers is minimal, simplicity is the + * choice. Save the same context on interrupt entry as for tasks in + * this case. * - * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then - * care should be used in designing the context area. + * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then + * care should be used in designing the context area. * - * On some CPUs with hardware floating point support, the Context_Control_fp - * structure will not be used or it simply consist of an array of a - * fixed number of bytes. This is done when the floating point context - * is dumped by a "FP save context" type instruction and the format - * is not really defined by the CPU. In this case, there is no need - * to figure out the exact format -- only the size. Of course, although - * this is enough information for RTEMS, it is probably not enough for - * a debugger such as gdb. But that is another problem. + * On some CPUs with hardware floating point support, the Context_Control_fp + * structure will not be used or it simply consist of an array of a + * fixed number of bytes. This is done when the floating point context + * is dumped by a "FP save context" type instruction and the format + * is not really defined by the CPU. In this case, there is no need + * to figure out the exact format -- only the size. Of course, although + * this is enough information for RTEMS, it is probably not enough for + * a debugger such as gdb. But that is another problem. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate + * + * @{ */ /** - * @ingroup CPUContext Management - * This defines the minimal set of integer and processor state registers - * that must be saved during a voluntary context switch from one thread - * to another. + * This defines the minimal set of integer and processor state registers + * that must be saved during a voluntary context switch from one thread + * to another. */ typedef struct { /** r8 -- temporary register */ @@ -487,21 +490,18 @@ typedef struct { } Context_Control; /** - * @ingroup CPUContext Management - * - * This macro returns the stack pointer associated with @a _context. + * This macro returns the stack pointer associated with @a _context. * - * @param[in] _context is the thread context area to access + * @param[in] _context is the thread context area to access * - * @return This method returns the stack pointer. + * @return This method returns the stack pointer. */ #define _CPU_Context_Get_SP( _context ) \ (_context)->r15_sp /** - * @ingroup CPUContext Management - * This defines the complete set of floating point registers that must - * be saved during any context switch from one thread to another. + * This defines the complete set of floating point registers that must + * be saved during any context switch from one thread to another. */ typedef struct { /** FPU registers are listed here */ @@ -509,48 +509,51 @@ typedef struct { } Context_Control_fp; /** - * @ingroup CPUContext Management - * This defines the set of integer and processor state registers that must - * be saved during an interrupt. This set does not include any which are - * in @ref Context_Control. + * This defines the set of integer and processor state registers that must + * be saved during an interrupt. This set does not include any which are + * in @ref Context_Control. */ typedef struct { /** This field is a hint that a port will have a number of integer - * registers that need to be saved when an interrupt occurs or - * when a context switch occurs at the end of an ISR. + * registers that need to be saved when an interrupt occurs or + * when a context switch occurs at the end of an ISR. */ uint32_t special_interrupt_register; } CPU_Interrupt_frame; /** - * This variable is optional. It is used on CPUs on which it is difficult - * to generate an "uninitialized" FP context. It is filled in by - * @ref _CPU_Initialize and copied into the task's FP context area during - * @ref _CPU_Context_Initialize. + * This variable is optional. It is used on CPUs on which it is difficult + * to generate an "uninitialized" FP context. It is filled in by + * @ref _CPU_Initialize and copied into the task's FP context area during + * @ref _CPU_Context_Initialize. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; +/** @} */ + /** - * @defgroup CPUInterrupt Processor Dependent Interrupt Management + * @defgroup CPUInterrupt Processor Dependent Interrupt Management * - * On some CPUs, RTEMS supports a software managed interrupt stack. - * This stack is allocated by the Interrupt Manager and the switch - * is performed in @ref _ISR_Handler. These variables contain pointers - * to the lowest and highest addresses in the chunk of memory allocated - * for the interrupt stack. Since it is unknown whether the stack - * grows up or down (in general), this give the CPU dependent - * code the option of picking the version it wants to use. + * On some CPUs, RTEMS supports a software managed interrupt stack. + * This stack is allocated by the Interrupt Manager and the switch + * is performed in @ref _ISR_Handler. These variables contain pointers + * to the lowest and highest addresses in the chunk of memory allocated + * for the interrupt stack. Since it is unknown whether the stack + * grows up or down (in general), this give the CPU dependent + * code the option of picking the version it wants to use. * - * @note These two variables are required if the macro - * @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. + * NOTE: These two variables are required if the macro + * @ref CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate + * + * @{ */ /* @@ -564,131 +567,130 @@ SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; /* XXX: if needed, put more variables here */ /** - * @ingroup CPUContext - * The size of the floating point context area. On some CPUs this - * will not be a "sizeof" because the format of the floating point - * area is not defined -- only the size is. This is usually on - * CPUs with a "floating point save context" instruction. + * @ingroup CPUContext + * The size of the floating point context area. On some CPUs this + * will not be a "sizeof" because the format of the floating point + * area is not defined -- only the size is. This is usually on + * CPUs with a "floating point save context" instruction. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) /** - * Amount of extra stack (above minimum stack size) required by - * MPCI receive server thread. Remember that in a multiprocessor - * system this thread must exist and be able to process all directives. + * Amount of extra stack (above minimum stack size) required by + * MPCI receive server thread. Remember that in a multiprocessor + * system this thread must exist and be able to process all directives. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 /** - * @ingroup CPUInterrupt - * This defines the number of entries in the @ref _ISR_Vector_table managed - * by RTEMS. + * This defines the number of entries in the @ref _ISR_Vector_table managed + * by RTEMS. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_INTERRUPT_NUMBER_OF_VECTORS 32 /** - * @ingroup CPUInterrupt - * This defines the highest interrupt vector number for this port. + * This defines the highest interrupt vector number for this port. */ #define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) /** - * @ingroup CPUInterrupt - * This is defined if the port has a special way to report the ISR nesting - * level. Most ports maintain the variable @a _ISR_Nest_level. + * This is defined if the port has a special way to report the ISR nesting + * level. Most ports maintain the variable @a _ISR_Nest_level. */ #define CPU_PROVIDES_ISR_IS_IN_PROGRESS FALSE +/** @} */ + /** - * @ingroup CPUContext - * Should be large enough to run all RTEMS tests. This ensures - * that a "reasonable" small application should not have any problems. + * @ingroup CPUContext + * Should be large enough to run all RTEMS tests. This ensures + * that a "reasonable" small application should not have any problems. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_STACK_MINIMUM_SIZE (1024) #define CPU_SIZEOF_POINTER 4 /** - * CPU's worst alignment requirement for data types on a byte boundary. This - * alignment does not take into account the requirements for the stack. + * CPU's worst alignment requirement for data types on a byte boundary. This + * alignment does not take into account the requirements for the stack. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_ALIGNMENT 8 /** - * This number corresponds to the byte alignment requirement for the - * heap handler. This alignment requirement may be stricter than that - * for the data types alignment specified by @ref CPU_ALIGNMENT. It is - * common for the heap to follow the same alignment requirement as - * @ref CPU_ALIGNMENT. If the @ref CPU_ALIGNMENT is strict enough for - * the heap, then this should be set to @ref CPU_ALIGNMENT. + * This number corresponds to the byte alignment requirement for the + * heap handler. This alignment requirement may be stricter than that + * for the data types alignment specified by @ref CPU_ALIGNMENT. It is + * common for the heap to follow the same alignment requirement as + * @ref CPU_ALIGNMENT. If the @ref CPU_ALIGNMENT is strict enough for + * the heap, then this should be set to @ref CPU_ALIGNMENT. * - * @note This does not have to be a power of 2 although it should be - * a multiple of 2 greater than or equal to 2. The requirement - * to be a multiple of 2 is because the heap uses the least - * significant field of the front and back flags to indicate - * that a block is in use or free. So you do not want any odd - * length blocks really putting length data in that bit. + * NOTE: This does not have to be a power of 2 although it should be + * a multiple of 2 greater than or equal to 2. The requirement + * to be a multiple of 2 is because the heap uses the least + * significant field of the front and back flags to indicate + * that a block is in use or free. So you do not want any odd + * length blocks really putting length data in that bit. * - * On byte oriented architectures, @ref CPU_HEAP_ALIGNMENT normally will - * have to be greater or equal to than @ref CPU_ALIGNMENT to ensure that - * elements allocated from the heap meet all restrictions. + * On byte oriented architectures, @ref CPU_HEAP_ALIGNMENT normally will + * have to be greater or equal to than @ref CPU_ALIGNMENT to ensure that + * elements allocated from the heap meet all restrictions. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_HEAP_ALIGNMENT CPU_ALIGNMENT /** - * This number corresponds to the byte alignment requirement for memory - * buffers allocated by the partition manager. This alignment requirement - * may be stricter than that for the data types alignment specified by - * @ref CPU_ALIGNMENT. It is common for the partition to follow the same - * alignment requirement as @ref CPU_ALIGNMENT. If the @ref CPU_ALIGNMENT is - * strict enough for the partition, then this should be set to - * @ref CPU_ALIGNMENT. + * This number corresponds to the byte alignment requirement for memory + * buffers allocated by the partition manager. This alignment requirement + * may be stricter than that for the data types alignment specified by + * @ref CPU_ALIGNMENT. It is common for the partition to follow the same + * alignment requirement as @ref CPU_ALIGNMENT. If the @ref CPU_ALIGNMENT is + * strict enough for the partition, then this should be set to + * @ref CPU_ALIGNMENT. * - * @note This does not have to be a power of 2. It does have to - * be greater or equal to than @ref CPU_ALIGNMENT. + * NOTE: This does not have to be a power of 2. It does have to + * be greater or equal to than @ref CPU_ALIGNMENT. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_PARTITION_ALIGNMENT CPU_ALIGNMENT /** - * This number corresponds to the byte alignment requirement for the - * stack. This alignment requirement may be stricter than that for the - * data types alignment specified by @ref CPU_ALIGNMENT. If the - * @ref CPU_ALIGNMENT is strict enough for the stack, then this should be - * set to 0. + * This number corresponds to the byte alignment requirement for the + * stack. This alignment requirement may be stricter than that for the + * data types alignment specified by @ref CPU_ALIGNMENT. If the + * @ref CPU_ALIGNMENT is strict enough for the stack, then this should be + * set to 0. * - * @note This must be a power of 2 either 0 or greater than @ref CPU_ALIGNMENT. + * NOTE: This must be a power of 2 either 0 or greater than @ref CPU_ALIGNMENT. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define CPU_STACK_ALIGNMENT 0 @@ -697,25 +699,29 @@ SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; */ /** - * @ingroup CPUInterrupt - * Support routine to initialize the RTEMS vector table after it is allocated. + * @addtogroup CPUInterrupt * - * Port Specific Information: + * @{ + */ + +/** + * Support routine to initialize the RTEMS vector table after it is allocated. * - * XXX document implementation including references if appropriate + * Port Specific Information: + * + * XXX document implementation including references if appropriate */ #define _CPU_Initialize_vectors() /** - * @ingroup CPUInterrupt - * Disable all interrupts for an RTEMS critical section. The previous - * level is returned in @a _isr_cookie. + * Disable all interrupts for an RTEMS critical section. The previous + * level is returned in @a _isr_cookie. * - * @param[out] _isr_cookie will contain the previous level cookie + * @param[out] _isr_cookie will contain the previous level cookie * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define _CPU_ISR_Disable( _isr_cookie ) \ { \ @@ -723,16 +729,15 @@ SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; } /** - * @ingroup CPUInterrupt - * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). - * This indicates the end of an RTEMS critical section. The parameter - * @a _isr_cookie is not modified. + * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). + * This indicates the end of an RTEMS critical section. The parameter + * @a _isr_cookie is not modified. * - * @param[in] _isr_cookie contain the previous level cookie + * @param[in] _isr_cookie contain the previous level cookie * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define _CPU_ISR_Enable( _isr_cookie ) \ { \ @@ -740,91 +745,90 @@ SCORE_EXTERN Context_Control_fp _CPU_Null_fp_context; } /** - * @ingroup CPUInterrupt - * This temporarily restores the interrupt to @a _isr_cookie before immediately - * disabling them again. This is used to divide long RTEMS critical - * sections into two or more parts. The parameter @a _isr_cookie is not - * modified. + * This temporarily restores the interrupt to @a _isr_cookie before immediately + * disabling them again. This is used to divide long RTEMS critical + * sections into two or more parts. The parameter @a _isr_cookie is not + * modified. * - * @param[in] _isr_cookie contain the previous level cookie + * @param[in] _isr_cookie contain the previous level cookie * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define _CPU_ISR_Flash( _isr_cookie ) \ { \ } /** - * @ingroup CPUInterrupt + * This routine and @ref _CPU_ISR_Get_level + * Map the interrupt level in task mode onto the hardware that the CPU + * actually provides. Currently, interrupt levels which do not + * map onto the CPU in a generic fashion are undefined. Someday, + * it would be nice if these were "mapped" by the application + * via a callout. For example, m68k has 8 levels 0 - 7, levels + * 8 - 255 would be available for bsp/application specific meaning. + * This could be used to manage a programmable interrupt controller + * via the rtems_task_mode directive. * - * This routine and @ref _CPU_ISR_Get_level - * Map the interrupt level in task mode onto the hardware that the CPU - * actually provides. Currently, interrupt levels which do not - * map onto the CPU in a generic fashion are undefined. Someday, - * it would be nice if these were "mapped" by the application - * via a callout. For example, m68k has 8 levels 0 - 7, levels - * 8 - 255 would be available for bsp/application specific meaning. - * This could be used to manage a programmable interrupt controller - * via the rtems_task_mode directive. - * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define _CPU_ISR_Set_level( new_level ) \ { \ } /** - * @ingroup CPUInterrupt - * Return the current interrupt disable level for this task in - * the format used by the interrupt level portion of the task mode. + * Return the current interrupt disable level for this task in + * the format used by the interrupt level portion of the task mode. * - * @note This routine usually must be implemented as a subroutine. + * NOTE: This routine usually must be implemented as a subroutine. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ uint32_t _CPU_ISR_Get_level( void ); /* end of ISR handler macros */ +/** @} */ + /* Context handler macros */ /** - * @brief CPU Context Initialize - * @ingroup CPUContext - * Initialize the context to a state suitable for starting a - * task after a context restore operation. Generally, this - * involves: - * - * - setting a starting address - * - preparing the stack - * - preparing the stack and frame pointers - * - setting the proper interrupt level in the context - * - initializing the floating point context - * - * This routine generally does not set any unnecessary register - * in the context. The state of the "general data" registers is - * undefined at task start time. - * - * @param[in] _the_context is the context structure to be initialized - * @param[in] _stack_base is the lowest physical address of this task's stack - * @param[in] _size is the size of this task's stack - * @param[in] _isr is the interrupt disable level - * @param[in] _entry_point is the thread's entry point. This is - * always @a _Thread_Handler - * @param[in] _is_fp is TRUE if the thread is to be a floating - * point thread. This is typically only used on CPUs where the - * FPU may be easily disabled by software such as on the SPARC - * where the PSR contains an enable FPU bit. + * @brief Initialize CPU context. * - * Port Specific Information: + * @ingroup CPUContext + * Initialize the context to a state suitable for starting a + * task after a context restore operation. Generally, this + * involves: * - * XXX document implementation including references if appropriate + * - setting a starting address + * - preparing the stack + * - preparing the stack and frame pointers + * - setting the proper interrupt level in the context + * - initializing the floating point context + * + * This routine generally does not set any unnecessary register + * in the context. The state of the "general data" registers is + * undefined at task start time. + * + * @param[in] _the_context is the context structure to be initialized + * @param[in] _stack_base is the lowest physical address of this task's stack + * @param[in] _size is the size of this task's stack + * @param[in] _isr is the interrupt disable level + * @param[in] _entry_point is the thread's entry point. This is + * always @a _Thread_Handler + * @param[in] _is_fp is TRUE if the thread is to be a floating + * point thread. This is typically only used on CPUs where the + * FPU may be easily disabled by software such as on the SPARC + * where the PSR contains an enable FPU bit. + * + * Port Specific Information: + * + * XXX document implementation including references if appropriate */ void _CPU_Context_Initialize( Context_Control *the_context, @@ -836,66 +840,66 @@ void _CPU_Context_Initialize( ); /** - * This routine is responsible for somehow restarting the currently - * executing task. If you are lucky, then all that is necessary - * is restoring the context. Otherwise, there will need to be - * a special assembly routine which does something special in this - * case. For many ports, simply adding a label to the restore path - * of @ref _CPU_Context_switch will work. On other ports, it may be - * possibly to load a few arguments and jump to the restore path. It will - * not work if restarting self conflicts with the stack frame - * assumptions of restoring a context. + * This routine is responsible for somehow restarting the currently + * executing task. If you are lucky, then all that is necessary + * is restoring the context. Otherwise, there will need to be + * a special assembly routine which does something special in this + * case. For many ports, simply adding a label to the restore path + * of @ref _CPU_Context_switch will work. On other ports, it may be + * possibly to load a few arguments and jump to the restore path. It will + * not work if restarting self conflicts with the stack frame + * assumptions of restoring a context. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ void _CPU_Context_Restart_self( Context_Control *the_context ); /** - * @ingroup CPUContext - * The purpose of this macro is to allow the initial pointer into - * a floating point context area (used to save the floating point - * context) to be at an arbitrary place in the floating point - * context area. + * @ingroup CPUContext + * The purpose of this macro is to allow the initial pointer into + * a floating point context area (used to save the floating point + * context) to be at an arbitrary place in the floating point + * context area. * - * This is necessary because some FP units are designed to have - * their context saved as a stack which grows into lower addresses. - * Other FP units can be saved by simply moving registers into offsets - * from the base of the context area. Finally some FP units provide - * a "dump context" instruction which could fill in from high to low - * or low to high based on the whim of the CPU designers. + * This is necessary because some FP units are designed to have + * their context saved as a stack which grows into lower addresses. + * Other FP units can be saved by simply moving registers into offsets + * from the base of the context area. Finally some FP units provide + * a "dump context" instruction which could fill in from high to low + * or low to high based on the whim of the CPU designers. * - * @param[in] _base is the lowest physical address of the floating point - * context area - * @param[in] _offset is the offset into the floating point area + * @param[in] _base is the lowest physical address of the floating point + * context area + * @param[in] _offset is the offset into the floating point area * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define _CPU_Context_Fp_start( _base, _offset ) \ ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) /** - * This routine initializes the FP context area passed to it to. - * There are a few standard ways in which to initialize the - * floating point context. The code included for this macro assumes - * that this is a CPU in which a "initial" FP context was saved into - * @a _CPU_Null_fp_context and it simply copies it to the destination - * context passed to it. + * This routine initializes the FP context area passed to it to. + * There are a few standard ways in which to initialize the + * floating point context. The code included for this macro assumes + * that this is a CPU in which a "initial" FP context was saved into + * @a _CPU_Null_fp_context and it simply copies it to the destination + * context passed to it. * - * Other floating point context save/restore models include: - * -# not doing anything, and - * -# putting a "null FP status word" in the correct place in the FP context. + * Other floating point context save/restore models include: + * -# not doing anything, and + * -# putting a "null FP status word" in the correct place in the FP context. * - * @param[in] _destination is the floating point context area + * @param[in] _destination is the floating point context area * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define _CPU_Context_Initialize_fp( _destination ) \ { \ @@ -907,13 +911,13 @@ void _CPU_Context_Restart_self( /* Fatal Error manager macros */ /** - * This routine copies _error into a known place -- typically a stack - * location or a register, optionally disables interrupts, and - * halts/stops the CPU. + * This routine copies _error into a known place -- typically a stack + * location or a register, optionally disables interrupts, and + * halts/stops the CPU. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #define _CPU_Fatal_halt( _error ) \ { \ @@ -924,68 +928,67 @@ void _CPU_Context_Restart_self( /* Bitfield handler macros */ /** - * @defgroup CPUBitfield Processor Dependent Bitfield Manipulation + * @defgroup CPUBitfield Processor Dependent Bitfield Manipulation + * + * This set of routines are used to implement fast searches for + * the most important ready task. * - * This set of routines are used to implement fast searches for - * the most important ready task. + * @{ */ /** - * @ingroup CPUBitfield - * This definition is set to TRUE if the port uses the generic bitfield - * manipulation implementation. + * This definition is set to TRUE if the port uses the generic bitfield + * manipulation implementation. */ #define CPU_USE_GENERIC_BITFIELD_CODE TRUE /** - * @ingroup CPUBitfield - * This definition is set to TRUE if the port uses the data tables provided - * by the generic bitfield manipulation implementation. - * This can occur when actually using the generic bitfield manipulation - * implementation or when implementing the same algorithm in assembly - * language for improved performance. It is unlikely that a port will use - * the data if it has a bitfield scan instruction. + * This definition is set to TRUE if the port uses the data tables provided + * by the generic bitfield manipulation implementation. + * This can occur when actually using the generic bitfield manipulation + * implementation or when implementing the same algorithm in assembly + * language for improved performance. It is unlikely that a port will use + * the data if it has a bitfield scan instruction. */ #define CPU_USE_GENERIC_BITFIELD_DATA TRUE /** - * @ingroup CPUBitfield - * This routine sets @a _output to the bit number of the first bit - * set in @a _value. @a _value is of CPU dependent type - * @a Priority_bit_map_Control. This type may be either 16 or 32 bits - * wide although only the 16 least significant bits will be used. - * - * There are a number of variables in using a "find first bit" type - * instruction. - * - * -# What happens when run on a value of zero? - * -# Bits may be numbered from MSB to LSB or vice-versa. - * -# The numbering may be zero or one based. - * -# The "find first bit" instruction may search from MSB or LSB. - * - * RTEMS guarantees that (1) will never happen so it is not a concern. - * (2),(3), (4) are handled by the macros @ref _CPU_Priority_Mask and - * @ref _CPU_Priority_bits_index. These three form a set of routines - * which must logically operate together. Bits in the _value are - * set and cleared based on masks built by @ref _CPU_Priority_Mask. - * The basic major and minor values calculated by @ref _Priority_Major - * and @ref _Priority_Minor are "massaged" by @ref _CPU_Priority_bits_index - * to properly range between the values returned by the "find first bit" - * instruction. This makes it possible for @ref _Priority_Get_highest to - * calculate the major and directly index into the minor table. - * This mapping is necessary to ensure that 0 (a high priority major/minor) - * is the first bit found. - * - * This entire "find first bit" and mapping process depends heavily - * on the manner in which a priority is broken into a major and minor - * components with the major being the 4 MSB of a priority and minor - * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest - * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next - * to the lowest priority. - * - * If your CPU does not have a "find first bit" instruction, then - * there are ways to make do without it. Here are a handful of ways - * to implement this in software: + * This routine sets @a _output to the bit number of the first bit + * set in @a _value. @a _value is of CPU dependent type + * @a Priority_bit_map_Control. This type may be either 16 or 32 bits + * wide although only the 16 least significant bits will be used. + * + * There are a number of variables in using a "find first bit" type + * instruction. + * + * -# What happens when run on a value of zero? + * -# Bits may be numbered from MSB to LSB or vice-versa. + * -# The numbering may be zero or one based. + * -# The "find first bit" instruction may search from MSB or LSB. + * + * RTEMS guarantees that (1) will never happen so it is not a concern. + * (2),(3), (4) are handled by the macros @ref _CPU_Priority_Mask and + * @ref _CPU_Priority_bits_index. These three form a set of routines + * which must logically operate together. Bits in the _value are + * set and cleared based on masks built by @ref _CPU_Priority_Mask. + * The basic major and minor values calculated by @ref _Priority_Major + * and @ref _Priority_Minor are "massaged" by @ref _CPU_Priority_bits_index + * to properly range between the values returned by the "find first bit" + * instruction. This makes it possible for @ref _Priority_Get_highest to + * calculate the major and directly index into the minor table. + * This mapping is necessary to ensure that 0 (a high priority major/minor) + * is the first bit found. + * + * This entire "find first bit" and mapping process depends heavily + * on the manner in which a priority is broken into a major and minor + * components with the major being the 4 MSB of a priority and minor + * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest + * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next + * to the lowest priority. + * + * If your CPU does not have a "find first bit" instruction, then + * there are ways to make do without it. Here are a handful of ways + * to implement this in software: * @verbatim - a series of 16 bit test instructions @@ -1002,15 +1005,15 @@ void _CPU_Context_Restart_self( _number += bit_set_table[ _value ] @endverbatim - * where bit_set_table[ 16 ] has values which indicate the first - * bit set + * where bit_set_table[ 16 ] has values which indicate the first + * bit set * - * @param[in] _value is the value to be scanned - * @param[in] _output is the first bit set + * @param[in] _value is the value to be scanned + * @param[in] _output is the first bit set * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) @@ -1023,13 +1026,13 @@ void _CPU_Context_Restart_self( /* end of Bitfield handler macros */ /** - * This routine builds the mask which corresponds to the bit fields - * as searched by @ref _CPU_Bitfield_Find_first_bit. See the discussion - * for that routine. + * This routine builds the mask which corresponds to the bit fields + * as searched by @ref _CPU_Bitfield_Find_first_bit. See the discussion + * for that routine. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) @@ -1039,17 +1042,16 @@ void _CPU_Context_Restart_self( #endif /** - * @ingroup CPUBitfield - * This routine translates the bit numbers returned by - * @ref _CPU_Bitfield_Find_first_bit into something suitable for use as - * a major or minor component of a priority. See the discussion - * for that routine. + * This routine translates the bit numbers returned by + * @ref _CPU_Bitfield_Find_first_bit into something suitable for use as + * a major or minor component of a priority. See the discussion + * for that routine. * - * @param[in] _priority is the major or minor number to translate + * @param[in] _priority is the major or minor number to translate * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ #if (CPU_USE_GENERIC_BITFIELD_CODE == FALSE) @@ -1060,30 +1062,33 @@ void _CPU_Context_Restart_self( /* end of Priority handler macros */ +/** @} */ + /* functions */ /** - * @brief CPU Initialize - * This routine performs CPU dependent initialization. + * @brief CPU initialization. * - * Port Specific Information: + * This routine performs CPU dependent initialization. * - * XXX document implementation including references if appropriate + * Port Specific Information: + * + * XXX document implementation including references if appropriate */ void _CPU_Initialize(void); /** - * @ingroup CPUInterrupt - * This routine installs a "raw" interrupt handler directly into the - * processor's vector table. + * @ingroup CPUInterrupt + * This routine installs a "raw" interrupt handler directly into the + * processor's vector table. * - * @param[in] vector is the vector number - * @param[in] new_handler is the raw ISR handler to install - * @param[in] old_handler is the previously installed ISR Handler + * @param[in] vector is the vector number + * @param[in] new_handler is the raw ISR handler to install + * @param[in] old_handler is the previously installed ISR Handler * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ void _CPU_ISR_install_raw_handler( uint32_t vector, @@ -1092,16 +1097,16 @@ void _CPU_ISR_install_raw_handler( ); /** - * @ingroup CPUInterrupt - * This routine installs an interrupt vector. + * @ingroup CPUInterrupt + * This routine installs an interrupt vector. * - * @param[in] vector is the vector number - * @param[in] new_handler is the RTEMS ISR handler to install - * @param[in] old_handler is the previously installed ISR Handler + * @param[in] vector is the vector number + * @param[in] new_handler is the RTEMS ISR handler to install + * @param[in] old_handler is the previously installed ISR Handler * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ void _CPU_ISR_install_vector( uint32_t vector, @@ -1110,28 +1115,28 @@ void _CPU_ISR_install_vector( ); /** - * @ingroup CPUInterrupt - * This routine installs the hardware interrupt stack pointer. + * @ingroup CPUInterrupt + * This routine installs the hardware interrupt stack pointer. * - * @note It need only be provided if @ref CPU_HAS_HARDWARE_INTERRUPT_STACK - * is TRUE. + * NOTE: It need only be provided if @ref CPU_HAS_HARDWARE_INTERRUPT_STACK + * is TRUE. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ void _CPU_Install_interrupt_stack( void ); /** - * @ingroup CPUContext - * This routine switches from the run context to the heir context. + * @ingroup CPUContext + * This routine switches from the run context to the heir context. * - * @param[in] run points to the context of the currently executing task - * @param[in] heir points to the context of the heir task + * @param[in] run points to the context of the currently executing task + * @param[in] heir points to the context of the heir task * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ void _CPU_Context_switch( Context_Control *run, @@ -1139,90 +1144,95 @@ void _CPU_Context_switch( ); /** - * @ingroup CPUContext - * This routine is generally used only to restart self in an - * efficient manner. It may simply be a label in @ref _CPU_Context_switch. + * @addtogroup CPUContext * - * @param[in] new_context points to the context to be restored. + * @{ + */ + +/** + * This routine is generally used only to restart self in an + * efficient manner. It may simply be a label in @ref _CPU_Context_switch. * - * @note May be unnecessary to reload some registers. + * @param[in] new_context points to the context to be restored. * - * Port Specific Information: + * NOTE: May be unnecessary to reload some registers. * - * XXX document implementation including references if appropriate + * Port Specific Information: + * + * XXX document implementation including references if appropriate */ void _CPU_Context_restore( Context_Control *new_context ) RTEMS_COMPILER_NO_RETURN_ATTRIBUTE; /** - * @ingroup CPUContext - * This routine saves the floating point context passed to it. + * This routine saves the floating point context passed to it. * - * @param[in] fp_context_ptr is a pointer to a pointer to a floating - * point context area + * @param[in] fp_context_ptr is a pointer to a pointer to a floating + * point context area * - * @return on output @a *fp_context_ptr will contain the address that - * should be used with @ref _CPU_Context_restore_fp to restore this context. + * @return on output @a *fp_context_ptr will contain the address that + * should be used with @ref _CPU_Context_restore_fp to restore this context. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ void _CPU_Context_save_fp( Context_Control_fp **fp_context_ptr ); /** - * @ingroup CPUContext - * This routine restores the floating point context passed to it. + * This routine restores the floating point context passed to it. * - * @param[in] fp_context_ptr is a pointer to a pointer to a floating - * point context area to restore + * @param[in] fp_context_ptr is a pointer to a pointer to a floating + * point context area to restore * - * @return on output @a *fp_context_ptr will contain the address that - * should be used with @ref _CPU_Context_save_fp to save this context. + * @return on output @a *fp_context_ptr will contain the address that + * should be used with @ref _CPU_Context_save_fp to save this context. * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ void _CPU_Context_restore_fp( Context_Control_fp **fp_context_ptr ); +/** @} */ + /* FIXME */ typedef CPU_Interrupt_frame CPU_Exception_frame; void _CPU_Exception_frame_print( const CPU_Exception_frame *frame ); /** - * @ingroup CPUEndian - * The following routine swaps the endian format of an unsigned int. - * It must be static because it is referenced indirectly. + * @ingroup CPUEndian + * The following routine swaps the endian format of an unsigned int. + * It must be static because it is referenced indirectly. * - * This version will work on any processor, but if there is a better - * way for your CPU PLEASE use it. The most common way to do this is to: + * This version will work on any processor, but if there is a better + * way for your CPU PLEASE use it. The most common way to do this is to: * - * swap least significant two bytes with 16-bit rotate - * swap upper and lower 16-bits - * swap most significant two bytes with 16-bit rotate + * swap least significant two bytes with 16-bit rotate + * swap upper and lower 16-bits + * swap most significant two bytes with 16-bit rotate * - * Some CPUs have special instructions which swap a 32-bit quantity in - * a single instruction (e.g. i486). It is probably best to avoid - * an "endian swapping control bit" in the CPU. One good reason is - * that interrupts would probably have to be disabled to ensure that - * an interrupt does not try to access the same "chunk" with the wrong - * endian. Another good reason is that on some CPUs, the endian bit - * endianness for ALL fetches -- both code and data -- so the code - * will be fetched incorrectly. + * Some CPUs have special instructions which swap a 32-bit quantity in + * a single instruction (e.g. i486). It is probably best to avoid + * an "endian swapping control bit" in the CPU. One good reason is + * that interrupts would probably have to be disabled to ensure that + * an interrupt does not try to access the same "chunk" with the wrong + * endian. Another good reason is that on some CPUs, the endian bit + * endianness for ALL fetches -- both code and data -- so the code + * will be fetched incorrectly. * - * @param[in] value is the value to be swapped - * @return the value after being endian swapped + * @param[in] value is the value to be swapped + * @return the value after being endian swapped * - * Port Specific Information: + * Port Specific Information: * - * XXX document implementation including references if appropriate + * XXX document implementation including references if appropriate */ static inline uint32_t CPU_swap_u32( uint32_t value @@ -1240,11 +1250,11 @@ static inline uint32_t CPU_swap_u32( } /** - * @ingroup CPUEndian - * This routine swaps a 16 bir quantity. + * @ingroup CPUEndian + * This routine swaps a 16 bir quantity. * - * @param[in] value is the value to be swapped - * @return the value after being endian swapped + * @param[in] value is the value to be swapped + * @return the value after being endian swapped */ #define CPU_swap_u16( value ) \ (((value&0xff) << 8) | ((value >> 8)&0xff)) diff --git a/cpukit/score/cpu/m32r/rtems/score/cpu_asm.h b/cpukit/score/cpu/m32r/rtems/score/cpu_asm.h index e3797a93f9..51648b1597 100644 --- a/cpukit/score/cpu/m32r/rtems/score/cpu_asm.h +++ b/cpukit/score/cpu/m32r/rtems/score/cpu_asm.h @@ -1,12 +1,14 @@ /** - * @file rtems/score/cpu_asm.h + * @file + * + * @brief Intel M32R Assembly File + * + * Very loose template for an include file for the cpu_asm.? file + * if it is implemented as a ".S" file (preprocessed by cpp) instead + * of a ".s" file (preprocessed by gm4 or gasp). */ /* - * Very loose template for an include file for the cpu_asm.? file - * if it is implemented as a ".S" file (preprocessed by cpp) instead - * of a ".s" file (preprocessed by gm4 or gasp). - * * COPYRIGHT (c) 1989-1999. * On-Line Applications Research Corporation (OAR). * diff --git a/cpukit/score/cpu/m32r/rtems/score/m32r.h b/cpukit/score/cpu/m32r/rtems/score/m32r.h index d4dbe69744..98461dfa37 100644 --- a/cpukit/score/cpu/m32r/rtems/score/m32r.h +++ b/cpukit/score/cpu/m32r/rtems/score/m32r.h @@ -1,9 +1,15 @@ -/* - * This file sets up basic CPU dependency settings based on - * compiler settings. For example, it can determine if - * floating point is available. This particular implementation - * is specified to the NO CPU port. +/** + * @file + * + * @brief Set up Basic CPU Dependency Settings Based on Compiler Settings * + * This file sets up basic CPU dependency settings based on + * compiler settings. For example, it can determine if + * floating point is available. This particular implementation + * is specified to the NO CPU port. + */ + +/* * COPYRIGHT (c) 1989-1999. * On-Line Applications Research Corporation (OAR). * diff --git a/cpukit/score/cpu/m32r/rtems/score/types.h b/cpukit/score/cpu/m32r/rtems/score/types.h index 839ac98cc6..829b668f69 100644 --- a/cpukit/score/cpu/m32r/rtems/score/types.h +++ b/cpukit/score/cpu/m32r/rtems/score/types.h @@ -1,11 +1,13 @@ /** - * @file rtems/score/types.h + * @file + * + * @brief Intel M32R CPU Type Definitions + * + * This include file contains type definitions pertaining to the Intel + * m32r processor family. */ /* - * This include file contains type definitions pertaining to the Intel - * m32r processor family. - * * COPYRIGHT (c) 1989-2006. * On-Line Applications Research Corporation (OAR). * diff --git a/cpukit/score/cpu/m68k/rtems/asm.h b/cpukit/score/cpu/m68k/rtems/asm.h index f6abbd6d32..cbd2a7f8b2 100644 --- a/cpukit/score/cpu/m68k/rtems/asm.h +++ b/cpukit/score/cpu/m68k/rtems/asm.h @@ -1,17 +1,20 @@ /** - * @file rtems/asm.h + * @file + * + * @brief Address the Problems Caused by Incompatible Flavor of + * Assemblers and Toolsets * - * This include file attempts to address the problems - * caused by incompatible flavors of assemblers and - * toolsets. It primarily addresses variations in the - * use of leading underscores on symbols and the requirement - * that register names be preceded by a %. + * This include file attempts to address the problems + * caused by incompatible flavors of assemblers and + * toolsets. It primarily addresses variations in the + * use of leading underscores on symbols and the requirement + * that register names be preceded by a %. + * + * NOTE: The spacing in the use of these macros + * is critical to them working as advertised. */ /* - * NOTE: The spacing in the use of these macros - * is critical to them working as advertised. - * * COPYRIGHT: * * This file is based on similar code found in newlib available diff --git a/cpukit/score/cpu/m68k/rtems/m68k/m68302.h b/cpukit/score/cpu/m68k/rtems/m68k/m68302.h index bcda554948..acf55f50c5 100644 --- a/cpukit/score/cpu/m68k/rtems/m68k/m68302.h +++ b/cpukit/score/cpu/m68k/rtems/m68k/m68302.h @@ -1,7 +1,7 @@ -/* - *------------------------------------------------------------------ +/** + * @file * - * m68302.h - Definitions for Motorola MC68302 processor. + * @brief Definitions for Motorola MC68302 Processor * * Section references in this file refer to revision 2 of Motorola's * "MC68302 Integrated Multiprotocol Processor User's Manual". @@ -9,7 +9,9 @@ * * Based on Don Meyer's cpu68302.h that was posted in comp.sys.m68k * on 17 February, 1993. - * + */ + +/* * COPYRIGHT 1995 David W. Glessner. * * Redistribution and use in source and binary forms are permitted diff --git a/cpukit/score/cpu/m68k/rtems/m68k/m68360.h b/cpukit/score/cpu/m68k/rtems/m68k/m68360.h index 5c7b90691f..dc181d0cdf 100644 --- a/cpukit/score/cpu/m68k/rtems/m68k/m68360.h +++ b/cpukit/score/cpu/m68k/rtems/m68k/m68360.h @@ -1,3 +1,8 @@ +/** + * @file + * + * @brief Definitions for Motorola MC68360 Processor + */ /* ************************************************************************** ************************************************************************** @@ -707,7 +712,7 @@ typedef struct m360_ { unsigned char _pad14[0xF0-0xD0]; unsigned char _pad15[0x100-0xF0]; unsigned char _pad16[0x500-0x100]; - + /* * IDMA1 Block */ @@ -725,7 +730,7 @@ typedef struct m360_ { unsigned char csr1; unsigned char _pad21; unsigned short _pad22; - + /* * SDMA Block */ @@ -733,7 +738,7 @@ typedef struct m360_ { unsigned char _pad23; unsigned short sdcr; unsigned long sdar; - + /* * IDMA2 Block */ @@ -750,7 +755,7 @@ typedef struct m360_ { unsigned char _pad28; unsigned short _pad29; unsigned long _pad30; - + /* * CPIC Block */ @@ -774,7 +779,7 @@ typedef struct m360_ { unsigned short pcint; unsigned short _pad32; unsigned long _pad33[5]; - + /* * TIMER Block */ @@ -802,7 +807,7 @@ typedef struct m360_ { unsigned short ter3; unsigned short ter4; unsigned long _pad36[2]; - + /* * CP Block */ diff --git a/cpukit/score/cpu/m68k/rtems/m68k/qsm.h b/cpukit/score/cpu/m68k/rtems/m68k/qsm.h index 312dfa8325..32dbc1d5f9 100644 --- a/cpukit/score/cpu/m68k/rtems/m68k/qsm.h +++ b/cpukit/score/cpu/m68k/rtems/m68k/qsm.h @@ -1,7 +1,7 @@ -/* - *------------------------------------------------------------------- +/** + * @file * - * QSM -- Queued Serial Module + * @brief Motorola M68K Queued Serial Module * * The QSM contains two serial interfaces: (a) the queued serial * peripheral interface (QSPI) and the serial communication interface @@ -15,7 +15,9 @@ * For more information, refer to Motorola's "Modular Microcontroller * Family Queued Serial Module Reference Manual" (Motorola document * QSMRM/AD). - * + */ + +/* * This file was created by John S. Gwynne to support Motorola's 68332 MCU. * * Redistribution and use in source and binary forms are permitted diff --git a/cpukit/score/cpu/m68k/rtems/m68k/sim.h b/cpukit/score/cpu/m68k/rtems/m68k/sim.h index 42eae109d9..cec6b84cc1 100644 --- a/cpukit/score/cpu/m68k/rtems/m68k/sim.h +++ b/cpukit/score/cpu/m68k/rtems/m68k/sim.h @@ -1,7 +1,7 @@ -/* - *------------------------------------------------------------------- +/** + * @file * - * SIM -- System Integration Module + * @brief Motorola M68K System Integration Module * * The system integration module (SIM) is used on many Motorola 16- * and 32-bit MCUs for the following functions: @@ -23,7 +23,9 @@ * For more information, refer to Motorola's "Modular Microcontroller * Family System Integration Module Reference Manual" (Motorola document * SIMRM/AD). - * + */ + +/* * This file was created by John S. Gwynne to support Motorola's 68332 MCU. * * Redistribution and use in source and binary forms are permitted diff --git a/cpukit/score/cpu/m68k/rtems/score/cpu.h b/cpukit/score/cpu/m68k/rtems/score/cpu.h index fb970eb108..8575f90e19 100644 --- a/cpukit/score/cpu/m68k/rtems/score/cpu.h +++ b/cpukit/score/cpu/m68k/rtems/score/cpu.h @@ -1,11 +1,13 @@ /** - * @file rtems/score/cpu.h + * @file + * + * @brief Motorola M68K CPU Dependent Source + * + * This include file contains information pertaining to the Motorola + * m68xxx processor family. */ /* - * This include file contains information pertaining to the Motorola - * m68xxx processor family. - * * COPYRIGHT (c) 1989-2011. * On-Line Applications Research Corporation (OAR). * diff --git a/cpukit/score/cpu/m68k/rtems/score/m68k.h b/cpukit/score/cpu/m68k/rtems/score/m68k.h index cc2f11dc40..2c646c5bcf 100644 --- a/cpukit/score/cpu/m68k/rtems/score/m68k.h +++ b/cpukit/score/cpu/m68k/rtems/score/m68k.h @@ -1,11 +1,13 @@ /** - * @file rtems/score/m68k.h + * @file + * + * @brief Motorola M68K CPU Dependent Source + * + * This include file contains information pertaining to the Motorola + * m68xxx processor family. */ /* - * This include file contains information pertaining to the Motorola - * m68xxx processor family. - * * COPYRIGHT (c) 1989-1999. * On-Line Applications Research Corporation (OAR). * diff --git a/cpukit/score/cpu/m68k/rtems/score/types.h b/cpukit/score/cpu/m68k/rtems/score/types.h index 8591511075..a901c90542 100644 --- a/cpukit/score/cpu/m68k/rtems/score/types.h +++ b/cpukit/score/cpu/m68k/rtems/score/types.h @@ -1,11 +1,13 @@ /** - * @file rtems/score/types.h + * @file + * + * @brief Motorola M68K CPU Type Definitions + * + * This include file contains type definitions pertaining to the Motorola + * m68xxx processor family. */ /* - * This include file contains type definitions pertaining to the Motorola - * m68xxx processor family. - * * COPYRIGHT (c) 1989-1999. * On-Line Applications Research Corporation (OAR). * diff --git a/cpukit/score/cpu/v850/rtems/score/cpu_asm.h b/cpukit/score/cpu/v850/rtems/score/cpu_asm.h index 49a44a93a1..bc22bc199b 100644 --- a/cpukit/score/cpu/v850/rtems/score/cpu_asm.h +++ b/cpukit/score/cpu/v850/rtems/score/cpu_asm.h @@ -1,11 +1,10 @@ /** - * @file rtems/score/cpu_asm.h - */ - -/* - * Very loose template for an include file for the cpu_asm.? file - * if it is implemented as a ".S" file (preprocessed by cpp) instead - * of a ".s" file (preprocessed by gm4 or gasp). + * @file + * + * @brief V850 Assembly File + * Very loose template for an include file for the cpu_asm.? file + * if it is implemented as a ".S" file (preprocessed by cpp) instead + * of a ".s" file (preprocessed by gm4 or gasp). */ /* -- cgit v1.2.3