From 0d51c05bb61e83613fd9f01c717baec3c9636e32 Mon Sep 17 00:00:00 2001 From: Sebastian Huber Date: Fri, 8 Sep 2017 07:45:47 +0200 Subject: bsp/qoriq: Import ePAPR hcalls from Linux 4.12 Update #3085. --- .../powerpc/qoriq/include/asm/epapr_hcalls.h | 575 ++++++++++++++++++ .../libbsp/powerpc/qoriq/include/asm/fsl_hcalls.h | 655 +++++++++++++++++++++ .../powerpc/qoriq/include/uapi/asm/epapr_hcalls.h | 98 +++ 3 files changed, 1328 insertions(+) create mode 100644 c/src/lib/libbsp/powerpc/qoriq/include/asm/epapr_hcalls.h create mode 100644 c/src/lib/libbsp/powerpc/qoriq/include/asm/fsl_hcalls.h create mode 100644 c/src/lib/libbsp/powerpc/qoriq/include/uapi/asm/epapr_hcalls.h diff --git a/c/src/lib/libbsp/powerpc/qoriq/include/asm/epapr_hcalls.h b/c/src/lib/libbsp/powerpc/qoriq/include/asm/epapr_hcalls.h new file mode 100644 index 0000000000..334459ad14 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/qoriq/include/asm/epapr_hcalls.h @@ -0,0 +1,575 @@ +/* + * ePAPR hcall interface + * + * Copyright 2008-2011 Freescale Semiconductor, Inc. + * + * Author: Timur Tabi + * + * This file is provided under a dual BSD/GPL license. When using or + * redistributing this file, you may do so under either license. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* A "hypercall" is an "sc 1" instruction. This header file file provides C + * wrapper functions for the ePAPR hypervisor interface. It is inteded + * for use by Linux device drivers and other operating systems. + * + * The hypercalls are implemented as inline assembly, rather than assembly + * language functions in a .S file, for optimization. It allows + * the caller to issue the hypercall instruction directly, improving both + * performance and memory footprint. + */ + +#ifndef _EPAPR_HCALLS_H +#define _EPAPR_HCALLS_H + +#include + +#ifndef __ASSEMBLY__ +#include +#include +#include + +/* + * Hypercall register clobber list + * + * These macros are used to define the list of clobbered registers during a + * hypercall. Technically, registers r0 and r3-r12 are always clobbered, + * but the gcc inline assembly syntax does not allow us to specify registers + * on the clobber list that are also on the input/output list. Therefore, + * the lists of clobbered registers depends on the number of register + * parmeters ("+r" and "=r") passed to the hypercall. + * + * Each assembly block should use one of the HCALL_CLOBBERSx macros. As a + * general rule, 'x' is the number of parameters passed to the assembly + * block *except* for r11. + * + * If you're not sure, just use the smallest value of 'x' that does not + * generate a compilation error. Because these are static inline functions, + * the compiler will only check the clobber list for a function if you + * compile code that calls that function. + * + * r3 and r11 are not included in any clobbers list because they are always + * listed as output registers. + * + * XER, CTR, and LR are currently listed as clobbers because it's uncertain + * whether they will be clobbered. + * + * Note that r11 can be used as an output parameter. + * + * The "memory" clobber is only necessary for hcalls where the Hypervisor + * will read or write guest memory. However, we add it to all hcalls because + * the impact is minimal, and we want to ensure that it's present for the + * hcalls that need it. +*/ + +/* List of common clobbered registers. Do not use this macro. */ +#define EV_HCALL_CLOBBERS "r0", "r12", "xer", "ctr", "lr", "cc", "memory" + +#define EV_HCALL_CLOBBERS8 EV_HCALL_CLOBBERS +#define EV_HCALL_CLOBBERS7 EV_HCALL_CLOBBERS8, "r10" +#define EV_HCALL_CLOBBERS6 EV_HCALL_CLOBBERS7, "r9" +#define EV_HCALL_CLOBBERS5 EV_HCALL_CLOBBERS6, "r8" +#define EV_HCALL_CLOBBERS4 EV_HCALL_CLOBBERS5, "r7" +#define EV_HCALL_CLOBBERS3 EV_HCALL_CLOBBERS4, "r6" +#define EV_HCALL_CLOBBERS2 EV_HCALL_CLOBBERS3, "r5" +#define EV_HCALL_CLOBBERS1 EV_HCALL_CLOBBERS2, "r4" + +extern bool epapr_paravirt_enabled; +extern u32 epapr_hypercall_start[]; + +#ifdef CONFIG_EPAPR_PARAVIRT +int __init epapr_paravirt_early_init(void); +#else +static inline int epapr_paravirt_early_init(void) { return 0; } +#endif + +/* + * We use "uintptr_t" to define a register because it's guaranteed to be a + * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit + * platform. + * + * All registers are either input/output or output only. Registers that are + * initialized before making the hypercall are input/output. All + * input/output registers are represented with "+r". Output-only registers + * are represented with "=r". Do not specify any unused registers. The + * clobber list will tell the compiler that the hypercall modifies those + * registers, which is good enough. + */ + +/** + * ev_int_set_config - configure the specified interrupt + * @interrupt: the interrupt number + * @config: configuration for this interrupt + * @priority: interrupt priority + * @destination: destination CPU number + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_set_config(unsigned int interrupt, + uint32_t config, unsigned int priority, uint32_t destination) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + + r11 = EV_HCALL_TOKEN(EV_INT_SET_CONFIG); + r3 = interrupt; + r4 = config; + r5 = priority; + r6 = destination; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6) + : : EV_HCALL_CLOBBERS4 + ); + + return r3; +} + +/** + * ev_int_get_config - return the config of the specified interrupt + * @interrupt: the interrupt number + * @config: returned configuration for this interrupt + * @priority: returned interrupt priority + * @destination: returned destination CPU number + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_get_config(unsigned int interrupt, + uint32_t *config, unsigned int *priority, uint32_t *destination) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + + r11 = EV_HCALL_TOKEN(EV_INT_GET_CONFIG); + r3 = interrupt; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5), "=r" (r6) + : : EV_HCALL_CLOBBERS4 + ); + + *config = r4; + *priority = r5; + *destination = r6; + + return r3; +} + +/** + * ev_int_set_mask - sets the mask for the specified interrupt source + * @interrupt: the interrupt number + * @mask: 0=enable interrupts, 1=disable interrupts + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_set_mask(unsigned int interrupt, + unsigned int mask) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = EV_HCALL_TOKEN(EV_INT_SET_MASK); + r3 = interrupt; + r4 = mask; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + return r3; +} + +/** + * ev_int_get_mask - returns the mask for the specified interrupt source + * @interrupt: the interrupt number + * @mask: returned mask for this interrupt (0=enabled, 1=disabled) + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_get_mask(unsigned int interrupt, + unsigned int *mask) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = EV_HCALL_TOKEN(EV_INT_GET_MASK); + r3 = interrupt; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *mask = r4; + + return r3; +} + +/** + * ev_int_eoi - signal the end of interrupt processing + * @interrupt: the interrupt number + * + * This function signals the end of processing for the the specified + * interrupt, which must be the interrupt currently in service. By + * definition, this is also the highest-priority interrupt. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_eoi(unsigned int interrupt) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = EV_HCALL_TOKEN(EV_INT_EOI); + r3 = interrupt; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * ev_byte_channel_send - send characters to a byte stream + * @handle: byte stream handle + * @count: (input) num of chars to send, (output) num chars sent + * @buffer: pointer to a 16-byte buffer + * + * @buffer must be at least 16 bytes long, because all 16 bytes will be + * read from memory into registers, even if count < 16. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_byte_channel_send(unsigned int handle, + unsigned int *count, const char buffer[EV_BYTE_CHANNEL_MAX_BYTES]) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r8 __asm__("r8"); + const uint32_t *p = (const uint32_t *) buffer; + + r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_SEND); + r3 = handle; + r4 = *count; + r5 = be32_to_cpu(p[0]); + r6 = be32_to_cpu(p[1]); + r7 = be32_to_cpu(p[2]); + r8 = be32_to_cpu(p[3]); + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), + "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), "+r" (r8) + : : EV_HCALL_CLOBBERS6 + ); + + *count = r4; + + return r3; +} + +/** + * ev_byte_channel_receive - fetch characters from a byte channel + * @handle: byte channel handle + * @count: (input) max num of chars to receive, (output) num chars received + * @buffer: pointer to a 16-byte buffer + * + * The size of @buffer must be at least 16 bytes, even if you request fewer + * than 16 characters, because we always write 16 bytes to @buffer. This is + * for performance reasons. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_byte_channel_receive(unsigned int handle, + unsigned int *count, char buffer[EV_BYTE_CHANNEL_MAX_BYTES]) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r8 __asm__("r8"); + uint32_t *p = (uint32_t *) buffer; + + r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_RECEIVE); + r3 = handle; + r4 = *count; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4), + "=r" (r5), "=r" (r6), "=r" (r7), "=r" (r8) + : : EV_HCALL_CLOBBERS6 + ); + + *count = r4; + p[0] = cpu_to_be32(r5); + p[1] = cpu_to_be32(r6); + p[2] = cpu_to_be32(r7); + p[3] = cpu_to_be32(r8); + + return r3; +} + +/** + * ev_byte_channel_poll - returns the status of the byte channel buffers + * @handle: byte channel handle + * @rx_count: returned count of bytes in receive queue + * @tx_count: returned count of free space in transmit queue + * + * This function reports the amount of data in the receive queue (i.e. the + * number of bytes you can read), and the amount of free space in the transmit + * queue (i.e. the number of bytes you can write). + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_byte_channel_poll(unsigned int handle, + unsigned int *rx_count, unsigned int *tx_count) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + + r11 = EV_HCALL_TOKEN(EV_BYTE_CHANNEL_POLL); + r3 = handle; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4), "=r" (r5) + : : EV_HCALL_CLOBBERS3 + ); + + *rx_count = r4; + *tx_count = r5; + + return r3; +} + +/** + * ev_int_iack - acknowledge an interrupt + * @handle: handle to the target interrupt controller + * @vector: returned interrupt vector + * + * If handle is zero, the function returns the next interrupt source + * number to be handled irrespective of the hierarchy or cascading + * of interrupt controllers. If non-zero, specifies a handle to the + * interrupt controller that is the target of the acknowledge. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_int_iack(unsigned int handle, + unsigned int *vector) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = EV_HCALL_TOKEN(EV_INT_IACK); + r3 = handle; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *vector = r4; + + return r3; +} + +/** + * ev_doorbell_send - send a doorbell to another partition + * @handle: doorbell send handle + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_doorbell_send(unsigned int handle) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = EV_HCALL_TOKEN(EV_DOORBELL_SEND); + r3 = handle; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * ev_idle -- wait for next interrupt on this core + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int ev_idle(void) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = EV_HCALL_TOKEN(EV_IDLE); + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "=r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +#ifdef CONFIG_EPAPR_PARAVIRT +static inline unsigned long epapr_hypercall(unsigned long *in, + unsigned long *out, + unsigned long nr) +{ + unsigned long register r0 asm("r0"); + unsigned long register r3 asm("r3") = in[0]; + unsigned long register r4 asm("r4") = in[1]; + unsigned long register r5 asm("r5") = in[2]; + unsigned long register r6 asm("r6") = in[3]; + unsigned long register r7 asm("r7") = in[4]; + unsigned long register r8 asm("r8") = in[5]; + unsigned long register r9 asm("r9") = in[6]; + unsigned long register r10 asm("r10") = in[7]; + unsigned long register r11 asm("r11") = nr; + unsigned long register r12 asm("r12"); + + asm volatile("bl epapr_hypercall_start" + : "=r"(r0), "=r"(r3), "=r"(r4), "=r"(r5), "=r"(r6), + "=r"(r7), "=r"(r8), "=r"(r9), "=r"(r10), "=r"(r11), + "=r"(r12) + : "r"(r3), "r"(r4), "r"(r5), "r"(r6), "r"(r7), "r"(r8), + "r"(r9), "r"(r10), "r"(r11) + : "memory", "cc", "xer", "ctr", "lr"); + + out[0] = r4; + out[1] = r5; + out[2] = r6; + out[3] = r7; + out[4] = r8; + out[5] = r9; + out[6] = r10; + out[7] = r11; + + return r3; +} +#else +static unsigned long epapr_hypercall(unsigned long *in, + unsigned long *out, + unsigned long nr) +{ + return EV_UNIMPLEMENTED; +} +#endif + +static inline long epapr_hypercall0_1(unsigned int nr, unsigned long *r2) +{ + unsigned long in[8]; + unsigned long out[8]; + unsigned long r; + + r = epapr_hypercall(in, out, nr); + *r2 = out[0]; + + return r; +} + +static inline long epapr_hypercall0(unsigned int nr) +{ + unsigned long in[8]; + unsigned long out[8]; + + return epapr_hypercall(in, out, nr); +} + +static inline long epapr_hypercall1(unsigned int nr, unsigned long p1) +{ + unsigned long in[8]; + unsigned long out[8]; + + in[0] = p1; + return epapr_hypercall(in, out, nr); +} + +static inline long epapr_hypercall2(unsigned int nr, unsigned long p1, + unsigned long p2) +{ + unsigned long in[8]; + unsigned long out[8]; + + in[0] = p1; + in[1] = p2; + return epapr_hypercall(in, out, nr); +} + +static inline long epapr_hypercall3(unsigned int nr, unsigned long p1, + unsigned long p2, unsigned long p3) +{ + unsigned long in[8]; + unsigned long out[8]; + + in[0] = p1; + in[1] = p2; + in[2] = p3; + return epapr_hypercall(in, out, nr); +} + +static inline long epapr_hypercall4(unsigned int nr, unsigned long p1, + unsigned long p2, unsigned long p3, + unsigned long p4) +{ + unsigned long in[8]; + unsigned long out[8]; + + in[0] = p1; + in[1] = p2; + in[2] = p3; + in[3] = p4; + return epapr_hypercall(in, out, nr); +} +#endif /* !__ASSEMBLY__ */ +#endif /* _EPAPR_HCALLS_H */ diff --git a/c/src/lib/libbsp/powerpc/qoriq/include/asm/fsl_hcalls.h b/c/src/lib/libbsp/powerpc/qoriq/include/asm/fsl_hcalls.h new file mode 100644 index 0000000000..b889d13547 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/qoriq/include/asm/fsl_hcalls.h @@ -0,0 +1,655 @@ +/* + * Freescale hypervisor call interface + * + * Copyright 2008-2010 Freescale Semiconductor, Inc. + * + * Author: Timur Tabi + * + * This file is provided under a dual BSD/GPL license. When using or + * redistributing this file, you may do so under either license. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _FSL_HCALLS_H +#define _FSL_HCALLS_H + +#include +#include +#include +#include + +#define FH_API_VERSION 1 + +#define FH_ERR_GET_INFO 1 +#define FH_PARTITION_GET_DTPROP 2 +#define FH_PARTITION_SET_DTPROP 3 +#define FH_PARTITION_RESTART 4 +#define FH_PARTITION_GET_STATUS 5 +#define FH_PARTITION_START 6 +#define FH_PARTITION_STOP 7 +#define FH_PARTITION_MEMCPY 8 +#define FH_DMA_ENABLE 9 +#define FH_DMA_DISABLE 10 +#define FH_SEND_NMI 11 +#define FH_VMPIC_GET_MSIR 12 +#define FH_SYSTEM_RESET 13 +#define FH_GET_CORE_STATE 14 +#define FH_ENTER_NAP 15 +#define FH_EXIT_NAP 16 +#define FH_CLAIM_DEVICE 17 +#define FH_PARTITION_STOP_DMA 18 + +/* vendor ID: Freescale Semiconductor */ +#define FH_HCALL_TOKEN(num) _EV_HCALL_TOKEN(EV_FSL_VENDOR_ID, num) + +/* + * We use "uintptr_t" to define a register because it's guaranteed to be a + * 32-bit integer on a 32-bit platform, and a 64-bit integer on a 64-bit + * platform. + * + * All registers are either input/output or output only. Registers that are + * initialized before making the hypercall are input/output. All + * input/output registers are represented with "+r". Output-only registers + * are represented with "=r". Do not specify any unused registers. The + * clobber list will tell the compiler that the hypercall modifies those + * registers, which is good enough. + */ + +/** + * fh_send_nmi - send NMI to virtual cpu(s). + * @vcpu_mask: send NMI to virtual cpu(s) specified by this mask. + * + * Returns 0 for success, or EINVAL for invalid vcpu_mask. + */ +static inline unsigned int fh_send_nmi(unsigned int vcpu_mask) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_SEND_NMI); + r3 = vcpu_mask; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/* Arbitrary limits to avoid excessive memory allocation in hypervisor */ +#define FH_DTPROP_MAX_PATHLEN 4096 +#define FH_DTPROP_MAX_PROPLEN 32768 + +/** + * fh_partition_get_dtprop - get a property from a guest device tree. + * @handle: handle of partition whose device tree is to be accessed + * @dtpath_addr: physical address of device tree path to access + * @propname_addr: physical address of name of property + * @propvalue_addr: physical address of property value buffer + * @propvalue_len: length of buffer on entry, length of property on return + * + * Returns zero on success, non-zero on error. + */ +static inline unsigned int fh_partition_get_dtprop(int handle, + uint64_t dtpath_addr, + uint64_t propname_addr, + uint64_t propvalue_addr, + uint32_t *propvalue_len) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r8 __asm__("r8"); + register uintptr_t r9 __asm__("r9"); + register uintptr_t r10 __asm__("r10"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_GET_DTPROP); + r3 = handle; + +#ifdef CONFIG_PHYS_64BIT + r4 = dtpath_addr >> 32; + r6 = propname_addr >> 32; + r8 = propvalue_addr >> 32; +#else + r4 = 0; + r6 = 0; + r8 = 0; +#endif + r5 = (uint32_t)dtpath_addr; + r7 = (uint32_t)propname_addr; + r9 = (uint32_t)propvalue_addr; + r10 = *propvalue_len; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), + "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), + "+r" (r8), "+r" (r9), "+r" (r10) + : : EV_HCALL_CLOBBERS8 + ); + + *propvalue_len = r4; + return r3; +} + +/** + * Set a property in a guest device tree. + * @handle: handle of partition whose device tree is to be accessed + * @dtpath_addr: physical address of device tree path to access + * @propname_addr: physical address of name of property + * @propvalue_addr: physical address of property value + * @propvalue_len: length of property + * + * Returns zero on success, non-zero on error. + */ +static inline unsigned int fh_partition_set_dtprop(int handle, + uint64_t dtpath_addr, + uint64_t propname_addr, + uint64_t propvalue_addr, + uint32_t propvalue_len) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r8 __asm__("r8"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r7 __asm__("r7"); + register uintptr_t r9 __asm__("r9"); + register uintptr_t r10 __asm__("r10"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_SET_DTPROP); + r3 = handle; + +#ifdef CONFIG_PHYS_64BIT + r4 = dtpath_addr >> 32; + r6 = propname_addr >> 32; + r8 = propvalue_addr >> 32; +#else + r4 = 0; + r6 = 0; + r8 = 0; +#endif + r5 = (uint32_t)dtpath_addr; + r7 = (uint32_t)propname_addr; + r9 = (uint32_t)propvalue_addr; + r10 = propvalue_len; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), + "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7), + "+r" (r8), "+r" (r9), "+r" (r10) + : : EV_HCALL_CLOBBERS8 + ); + + return r3; +} + +/** + * fh_partition_restart - reboot the current partition + * @partition: partition ID + * + * Returns an error code if reboot failed. Does not return if it succeeds. + */ +static inline unsigned int fh_partition_restart(unsigned int partition) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_RESTART); + r3 = partition; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +#define FH_PARTITION_STOPPED 0 +#define FH_PARTITION_RUNNING 1 +#define FH_PARTITION_STARTING 2 +#define FH_PARTITION_STOPPING 3 +#define FH_PARTITION_PAUSING 4 +#define FH_PARTITION_PAUSED 5 +#define FH_PARTITION_RESUMING 6 + +/** + * fh_partition_get_status - gets the status of a partition + * @partition: partition ID + * @status: returned status code + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_get_status(unsigned int partition, + unsigned int *status) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_GET_STATUS); + r3 = partition; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *status = r4; + + return r3; +} + +/** + * fh_partition_start - boots and starts execution of the specified partition + * @partition: partition ID + * @entry_point: guest physical address to start execution + * + * The hypervisor creates a 1-to-1 virtual/physical IMA mapping, so at boot + * time, guest physical address are the same as guest virtual addresses. + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_start(unsigned int partition, + uint32_t entry_point, int load) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_START); + r3 = partition; + r4 = entry_point; + r5 = load; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5) + : : EV_HCALL_CLOBBERS3 + ); + + return r3; +} + +/** + * fh_partition_stop - stops another partition + * @partition: partition ID + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_stop(unsigned int partition) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_STOP); + r3 = partition; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * struct fh_sg_list: definition of the fh_partition_memcpy S/G list + * @source: guest physical address to copy from + * @target: guest physical address to copy to + * @size: number of bytes to copy + * @reserved: reserved, must be zero + * + * The scatter/gather list for fh_partition_memcpy() is an array of these + * structures. The array must be guest physically contiguous. + * + * This structure must be aligned on 32-byte boundary, so that no single + * strucuture can span two pages. + */ +struct fh_sg_list { + uint64_t source; /**< guest physical address to copy from */ + uint64_t target; /**< guest physical address to copy to */ + uint64_t size; /**< number of bytes to copy */ + uint64_t reserved; /**< reserved, must be zero */ +} __attribute__ ((aligned(32))); + +/** + * fh_partition_memcpy - copies data from one guest to another + * @source: the ID of the partition to copy from + * @target: the ID of the partition to copy to + * @sg_list: guest physical address of an array of &fh_sg_list structures + * @count: the number of entries in @sg_list + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_memcpy(unsigned int source, + unsigned int target, phys_addr_t sg_list, unsigned int count) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_MEMCPY); + r3 = source; + r4 = target; + r5 = (uint32_t) sg_list; + +#ifdef CONFIG_PHYS_64BIT + r6 = sg_list >> 32; +#else + r6 = 0; +#endif + r7 = count; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), + "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), "+r" (r7) + : : EV_HCALL_CLOBBERS5 + ); + + return r3; +} + +/** + * fh_dma_enable - enable DMA for the specified device + * @liodn: the LIODN of the I/O device for which to enable DMA + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_dma_enable(unsigned int liodn) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_DMA_ENABLE); + r3 = liodn; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * fh_dma_disable - disable DMA for the specified device + * @liodn: the LIODN of the I/O device for which to disable DMA + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_dma_disable(unsigned int liodn) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_DMA_DISABLE); + r3 = liodn; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + + +/** + * fh_vmpic_get_msir - returns the MPIC-MSI register value + * @interrupt: the interrupt number + * @msir_val: returned MPIC-MSI register value + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_vmpic_get_msir(unsigned int interrupt, + unsigned int *msir_val) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_VMPIC_GET_MSIR); + r3 = interrupt; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "=r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *msir_val = r4; + + return r3; +} + +/** + * fh_system_reset - reset the system + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_system_reset(void) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_SYSTEM_RESET); + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "=r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + + +/** + * fh_err_get_info - get platform error information + * @queue id: + * 0 for guest error event queue + * 1 for global error event queue + * + * @pointer to store the platform error data: + * platform error data is returned in registers r4 - r11 + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_err_get_info(int queue, uint32_t *bufsize, + uint32_t addr_hi, uint32_t addr_lo, int peek) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + register uintptr_t r5 __asm__("r5"); + register uintptr_t r6 __asm__("r6"); + register uintptr_t r7 __asm__("r7"); + + r11 = FH_HCALL_TOKEN(FH_ERR_GET_INFO); + r3 = queue; + r4 = *bufsize; + r5 = addr_hi; + r6 = addr_lo; + r7 = peek; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4), "+r" (r5), "+r" (r6), + "+r" (r7) + : : EV_HCALL_CLOBBERS5 + ); + + *bufsize = r4; + + return r3; +} + + +#define FH_VCPU_RUN 0 +#define FH_VCPU_IDLE 1 +#define FH_VCPU_NAP 2 + +/** + * fh_get_core_state - get the state of a vcpu + * + * @handle: handle of partition containing the vcpu + * @vcpu: vcpu number within the partition + * @state:the current state of the vcpu, see FH_VCPU_* + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_get_core_state(unsigned int handle, + unsigned int vcpu, unsigned int *state) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_GET_CORE_STATE); + r3 = handle; + r4 = vcpu; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + *state = r4; + return r3; +} + +/** + * fh_enter_nap - enter nap on a vcpu + * + * Note that though the API supports entering nap on a vcpu other + * than the caller, this may not be implmented and may return EINVAL. + * + * @handle: handle of partition containing the vcpu + * @vcpu: vcpu number within the partition + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_enter_nap(unsigned int handle, unsigned int vcpu) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_ENTER_NAP); + r3 = handle; + r4 = vcpu; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + return r3; +} + +/** + * fh_exit_nap - exit nap on a vcpu + * @handle: handle of partition containing the vcpu + * @vcpu: vcpu number within the partition + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_exit_nap(unsigned int handle, unsigned int vcpu) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + register uintptr_t r4 __asm__("r4"); + + r11 = FH_HCALL_TOKEN(FH_EXIT_NAP); + r3 = handle; + r4 = vcpu; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3), "+r" (r4) + : : EV_HCALL_CLOBBERS2 + ); + + return r3; +} +/** + * fh_claim_device - claim a "claimable" shared device + * @handle: fsl,hv-device-handle of node to claim + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_claim_device(unsigned int handle) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_CLAIM_DEVICE); + r3 = handle; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} + +/** + * Run deferred DMA disabling on a partition's private devices + * + * This applies to devices which a partition owns either privately, + * or which are claimable and still actively owned by that partition, + * and which do not have the no-dma-disable property. + * + * @handle: partition (must be stopped) whose DMA is to be disabled + * + * Returns 0 for success, or an error code. + */ +static inline unsigned int fh_partition_stop_dma(unsigned int handle) +{ + register uintptr_t r11 __asm__("r11"); + register uintptr_t r3 __asm__("r3"); + + r11 = FH_HCALL_TOKEN(FH_PARTITION_STOP_DMA); + r3 = handle; + + asm volatile("bl epapr_hypercall_start" + : "+r" (r11), "+r" (r3) + : : EV_HCALL_CLOBBERS1 + ); + + return r3; +} +#endif diff --git a/c/src/lib/libbsp/powerpc/qoriq/include/uapi/asm/epapr_hcalls.h b/c/src/lib/libbsp/powerpc/qoriq/include/uapi/asm/epapr_hcalls.h new file mode 100644 index 0000000000..b4504f3944 --- /dev/null +++ b/c/src/lib/libbsp/powerpc/qoriq/include/uapi/asm/epapr_hcalls.h @@ -0,0 +1,98 @@ +/* + * ePAPR hcall interface + * + * Copyright 2008-2011 Freescale Semiconductor, Inc. + * + * Author: Timur Tabi + * + * This file is provided under a dual BSD/GPL license. When using or + * redistributing this file, you may do so under either license. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _UAPI_ASM_POWERPC_EPAPR_HCALLS_H +#define _UAPI_ASM_POWERPC_EPAPR_HCALLS_H + +#define EV_BYTE_CHANNEL_SEND 1 +#define EV_BYTE_CHANNEL_RECEIVE 2 +#define EV_BYTE_CHANNEL_POLL 3 +#define EV_INT_SET_CONFIG 4 +#define EV_INT_GET_CONFIG 5 +#define EV_INT_SET_MASK 6 +#define EV_INT_GET_MASK 7 +#define EV_INT_IACK 9 +#define EV_INT_EOI 10 +#define EV_INT_SEND_IPI 11 +#define EV_INT_SET_TASK_PRIORITY 12 +#define EV_INT_GET_TASK_PRIORITY 13 +#define EV_DOORBELL_SEND 14 +#define EV_MSGSND 15 +#define EV_IDLE 16 + +/* vendor ID: epapr */ +#define EV_LOCAL_VENDOR_ID 0 /* for private use */ +#define EV_EPAPR_VENDOR_ID 1 +#define EV_FSL_VENDOR_ID 2 /* Freescale Semiconductor */ +#define EV_IBM_VENDOR_ID 3 /* IBM */ +#define EV_GHS_VENDOR_ID 4 /* Green Hills Software */ +#define EV_ENEA_VENDOR_ID 5 /* Enea */ +#define EV_WR_VENDOR_ID 6 /* Wind River Systems */ +#define EV_AMCC_VENDOR_ID 7 /* Applied Micro Circuits */ +#define EV_KVM_VENDOR_ID 42 /* KVM */ + +/* The max number of bytes that a byte channel can send or receive per call */ +#define EV_BYTE_CHANNEL_MAX_BYTES 16 + + +#define _EV_HCALL_TOKEN(id, num) (((id) << 16) | (num)) +#define EV_HCALL_TOKEN(hcall_num) _EV_HCALL_TOKEN(EV_EPAPR_VENDOR_ID, hcall_num) + +/* epapr return codes */ +#define EV_SUCCESS 0 +#define EV_EPERM 1 /* Operation not permitted */ +#define EV_ENOENT 2 /* Entry Not Found */ +#define EV_EIO 3 /* I/O error occurred */ +#define EV_EAGAIN 4 /* The operation had insufficient + * resources to complete and should be + * retried + */ +#define EV_ENOMEM 5 /* There was insufficient memory to + * complete the operation */ +#define EV_EFAULT 6 /* Bad guest address */ +#define EV_ENODEV 7 /* No such device */ +#define EV_EINVAL 8 /* An argument supplied to the hcall + was out of range or invalid */ +#define EV_INTERNAL 9 /* An internal error occurred */ +#define EV_CONFIG 10 /* A configuration error was detected */ +#define EV_INVALID_STATE 11 /* The object is in an invalid state */ +#define EV_UNIMPLEMENTED 12 /* Unimplemented hypercall */ +#define EV_BUFFER_OVERFLOW 13 /* Caller-supplied buffer too small */ + +#endif /* _UAPI_ASM_POWERPC_EPAPR_HCALLS_H */ -- cgit v1.2.3