diff options
Diffstat (limited to 'bsps/sh/gensh2/clock/ckinit.c')
-rw-r--r-- | bsps/sh/gensh2/clock/ckinit.c | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/bsps/sh/gensh2/clock/ckinit.c b/bsps/sh/gensh2/clock/ckinit.c new file mode 100644 index 0000000000..5120b594eb --- /dev/null +++ b/bsps/sh/gensh2/clock/ckinit.c @@ -0,0 +1,243 @@ +/* + * This file contains the clock driver the Hitachi SH 704X + */ + +/* + * Authors: Ralf Corsepius (corsepiu@faw.uni-ulm.de) and + * Bernd Becker (becker@faw.uni-ulm.de) + * + * COPYRIGHT (c) 1997-1998, FAW Ulm, Germany + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * + * COPYRIGHT (c) 1998. + * On-Line Applications Research Corporation (OAR). + * + * Modified to reflect registers of sh7045 processor: + * John M. Mills (jmills@tga.com) + * TGA Technologies, Inc. + * 100 Pinnacle Way, Suite 140 + * Norcross, GA 30071 U.S.A. + * August, 1999 + * + * This modified file may be copied and distributed in accordance + * the above-referenced license. It is provided for critique and + * developmental purposes without any warranty nor representation + * by the authors or by TGA Technologies. + * + * The license and distribution terms for this file may be + * found in the file LICENSE in this distribution or at + * http://www.rtems.org/license/LICENSE. + */ + +#include <rtems.h> + +#include <stdlib.h> + +#include <rtems/clockdrv.h> +#include <rtems/score/sh_io.h> +#include <rtems/score/sh.h> +#include <rtems/score/ispsh7045.h> +#include <rtems/score/iosh7045.h> + +extern uint32_t bsp_clicks_per_second; + +#define _MTU_COUNTER0_MICROSECOND (Clock_MHZ/16) + +#ifndef CLOCKPRIO +#define CLOCKPRIO 10 +#endif + +#define MTU0_STARTMASK 0xfe +#define MTU0_SYNCMASK 0xfe +#define MTU0_MODEMASK 0xc0 +#define MTU0_TCRMASK 0x22 /* bit 7 also used, vs 703x */ +#define MTU0_STAT_MASK 0xc0 +#define MTU0_IRQMASK 0xfe +#define MTU0_TIERMASK 0x01 +#define IPRC_MTU0_MASK 0xff0f +#define MTU0_TIORVAL 0x08 + +/* + * The interrupt vector number associated with the clock tick device + * driver. + */ + +#define CLOCK_VECTOR MTUA0_ISP_V + +/* + * Clock_driver_ticks is a monotonically increasing counter of the + * number of clock ticks since the driver was initialized. + */ +volatile uint32_t Clock_driver_ticks; + +static rtems_isr Clock_isr( rtems_vector_number vector ); +static uint32_t Clock_MHZ ; + +/* + * Clock_isrs is the number of clock ISRs until the next invocation of + * the RTEMS clock tick routine. The clock tick device driver + * gets an interrupt once a millisecond and counts down until the + * length of time between the user configured microseconds per tick + * has passed. + */ +uint32_t Clock_isrs; /* ISRs until next tick */ +static uint32_t Clock_isrs_const; /* only calculated once */ + +/* + * The previous ISR on this clock tick interrupt vector. + */ +rtems_isr_entry Old_ticker; + +/* + * Isr Handler + */ +static rtems_isr Clock_isr( + rtems_vector_number vector +) +{ + /* + * bump the number of clock driver ticks since initialization + * + + * determine if it is time to announce the passing of tick as configured + * to RTEMS through the rtems_clock_tick directive + * + * perform any timer dependent tasks + */ + uint8_t temp; + + /* reset the flags of the status register */ + temp = read8( MTU_TSR0) & MTU0_STAT_MASK; + write8( temp, MTU_TSR0); + + Clock_driver_ticks++ ; + + if( Clock_isrs == 1) + { + rtems_clock_tick(); + Clock_isrs = Clock_isrs_const; + } + else + { + Clock_isrs-- ; + } +} + +/* + * Install_clock + * + * Install a clock tick handler and reprograms the chip. This + * is used to initially establish the clock tick. + */ +static void Install_clock( + rtems_isr_entry clock_isr +) +{ + uint8_t temp8 = 0; + uint32_t factor = 1000000; + + /* + * Initialize the clock tick device driver variables + */ + + Clock_driver_ticks = 0; + Clock_isrs_const = rtems_configuration_get_microseconds_per_tick() / 10000; + Clock_isrs = Clock_isrs_const; + + factor /= rtems_configuration_get_microseconds_per_tick(); /* minimalization of integer division error */ + Clock_MHZ = bsp_clicks_per_second / factor ; + + rtems_interrupt_catch( Clock_isr, CLOCK_VECTOR, &Old_ticker ); + + /* + * Hardware specific initialize goes here + */ + + /* stop Timer 0 */ + temp8 = read8( MTU_TSTR) & MTU0_STARTMASK; + write8( temp8, MTU_TSTR); + + /* set initial counter value to 0 */ + write16( 0, MTU_TCNT0); + + /* Timer 0 runs independent */ + temp8 = read8( MTU_TSYR) & MTU0_SYNCMASK; + write8( temp8, MTU_TSYR); + + /* Timer 0 normal mode */ + temp8 = read8( MTU_TMDR0) & MTU0_MODEMASK; + write8( temp8, MTU_TMDR0); + + /* TCNT is cleared by GRA ; internal clock /16 */ + write8( MTU0_TCRMASK , MTU_TCR0); + + /* use GRA without I/O - pins */ + write8( MTU0_TIORVAL, MTU_TIORL0); + + /* reset flags of the status register */ + temp8 = read8( MTU_TSR0) & MTU0_STAT_MASK; + write8( temp8, MTU_TSR0); + + /* Irq if is equal GRA */ + temp8 = read8( MTU_TIER0) | MTU0_TIERMASK; + write8( temp8, MTU_TIER0); + + /* set interrupt priority */ + if( sh_set_irq_priority( CLOCK_VECTOR, CLOCKPRIO ) != RTEMS_SUCCESSFUL) + rtems_fatal_error_occurred( RTEMS_NOT_CONFIGURED); + + /* set counter limits */ + write16( _MTU_COUNTER0_MICROSECOND, MTU_GR0A); + + /* start counter */ + temp8 = read8( MTU_TSTR) |~MTU0_STARTMASK; + write8( temp8, MTU_TSTR); + + /* + * Schedule the clock cleanup routine to execute if the application exits. + */ + atexit( Clock_exit ); +} + +/* + * Clean up before the application exits + */ +void Clock_exit( void ) +{ + uint8_t temp8 = 0; + + /* turn off the timer interrupts */ + /* set interrupt priority to 0 */ + if( sh_set_irq_priority( CLOCK_VECTOR, 0 ) != RTEMS_SUCCESSFUL) + rtems_fatal_error_occurred( RTEMS_UNSATISFIED); + +/* + * temp16 = read16( MTU_TIER0) & IPRC_MTU0_IRQMASK; + * write16( temp16, MTU_TIER0); + */ + + /* stop counter */ + temp8 = read8( MTU_TSTR) & MTU0_STARTMASK; + write8( temp8, MTU_TSTR); + + /* old vector shall not be installed */ +} + +/* + * Clock_initialize + * + * Device driver entry point for clock tick driver initialization. + */ +rtems_device_driver Clock_initialize( + rtems_device_major_number major, + rtems_device_minor_number minor, + void *pargp +) +{ + Install_clock( Clock_isr ); + + return RTEMS_SUCCESSFUL; +} |