diff options
Diffstat (limited to 'bsps/powerpc/beatnik/net/if_em/if_em.h')
-rw-r--r-- | bsps/powerpc/beatnik/net/if_em/if_em.h | 493 |
1 files changed, 493 insertions, 0 deletions
diff --git a/bsps/powerpc/beatnik/net/if_em/if_em.h b/bsps/powerpc/beatnik/net/if_em/if_em.h new file mode 100644 index 0000000000..1dc09ce05f --- /dev/null +++ b/bsps/powerpc/beatnik/net/if_em/if_em.h @@ -0,0 +1,493 @@ +/************************************************************************** + +Copyright (c) 2001-2005, Intel Corporation +All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE +LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +POSSIBILITY OF SUCH DAMAGE. + +***************************************************************************/ + +/*$FreeBSD: /repoman/r/ncvs/src/sys/dev/em/if_em.h,v 1.31 2005/05/26 23:32:02 tackerman Exp $*/ + +#ifndef _EM_H_DEFINED_ +#define _EM_H_DEFINED_ + + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/mbuf.h> +#include <sys/protosw.h> +#include <sys/socket.h> +#include <sys/malloc.h> +#include <sys/kernel.h> +#ifndef __rtems__ +#include <sys/module.h> +#endif +#include <sys/sockio.h> +#include <sys/sysctl.h> + +#include <net/if.h> +#include <net/if_arp.h> +#include <net/ethernet.h> +#include <net/if_dl.h> +#include <net/if_media.h> +#ifndef __rtems__ + +#include <net/bpf.h> +#include <net/if_types.h> +#include <net/if_vlan_var.h> +#else +#include <net/if_types.h> +#endif + +#include <netinet/in_systm.h> +#include <netinet/in.h> +#include <netinet/ip.h> +#include <netinet/tcp.h> +#include <netinet/udp.h> + +#ifndef __rtems__ +#include <sys/bus.h> +#include <machine/bus.h> +#include <sys/rman.h> +#include <machine/resource.h> +#include <vm/vm.h> +#include <vm/pmap.h> +#include <machine/clock.h> +#include <dev/pci/pcivar.h> +#include <dev/pci/pcireg.h> +#else +#include <netinet/if_ether.h> +#include <bsp/pci.h> +#endif + +#ifndef __rtems__ +#include <sys/endian.h> +#include <sys/proc.h> +#include "opt_bdg.h" + + +#include <dev/em/if_em_hw.h> +#else +#include "if_em_hw.h" +#endif + +/* Tunables */ + +/* + * EM_MAX_TXD: Maximum number of Transmit Descriptors + * Valid Range: 80-256 for 82542 and 82543-based adapters + * 80-4096 for others + * Default Value: 256 + * This value is the number of transmit descriptors allocated by the driver. + * Increasing this value allows the driver to queue more transmits. Each + * descriptor is 16 bytes. + */ +#define EM_MAX_TXD 256 + +/* + * EM_MAX_RXD - Maximum number of receive Descriptors + * Valid Range: 80-256 for 82542 and 82543-based adapters + * 80-4096 for others + * Default Value: 256 + * This value is the number of receive descriptors allocated by the driver. + * Increasing this value allows the driver to buffer more incoming packets. + * Each descriptor is 16 bytes. A receive buffer is also allocated for each + * descriptor. The maximum MTU size is 16110. + * + */ +#define EM_MAX_RXD 80 + +/* + * EM_TIDV - Transmit Interrupt Delay Value + * Valid Range: 0-65535 (0=off) + * Default Value: 64 + * This value delays the generation of transmit interrupts in units of + * 1.024 microseconds. Transmit interrupt reduction can improve CPU + * efficiency if properly tuned for specific network traffic. If the + * system is reporting dropped transmits, this value may be set too high + * causing the driver to run out of available transmit descriptors. + */ +#define EM_TIDV 64 + +/* + * EM_TADV - Transmit Absolute Interrupt Delay Value (Not valid for 82542/82543/82544) + * Valid Range: 0-65535 (0=off) + * Default Value: 64 + * This value, in units of 1.024 microseconds, limits the delay in which a + * transmit interrupt is generated. Useful only if EM_TIDV is non-zero, + * this value ensures that an interrupt is generated after the initial + * packet is sent on the wire within the set amount of time. Proper tuning, + * along with EM_TIDV, may improve traffic throughput in specific + * network conditions. + */ +#define EM_TADV 64 + +/* + * EM_RDTR - Receive Interrupt Delay Timer (Packet Timer) + * Valid Range: 0-65535 (0=off) + * Default Value: 0 + * This value delays the generation of receive interrupts in units of 1.024 + * microseconds. Receive interrupt reduction can improve CPU efficiency if + * properly tuned for specific network traffic. Increasing this value adds + * extra latency to frame reception and can end up decreasing the throughput + * of TCP traffic. If the system is reporting dropped receives, this value + * may be set too high, causing the driver to run out of available receive + * descriptors. + * + * CAUTION: When setting EM_RDTR to a value other than 0, adapters + * may hang (stop transmitting) under certain network conditions. + * If this occurs a WATCHDOG message is logged in the system event log. + * In addition, the controller is automatically reset, restoring the + * network connection. To eliminate the potential for the hang + * ensure that EM_RDTR is set to 0. + */ +#define EM_RDTR 0 + +/* + * Receive Interrupt Absolute Delay Timer (Not valid for 82542/82543/82544) + * Valid Range: 0-65535 (0=off) + * Default Value: 64 + * This value, in units of 1.024 microseconds, limits the delay in which a + * receive interrupt is generated. Useful only if EM_RDTR is non-zero, + * this value ensures that an interrupt is generated after the initial + * packet is received within the set amount of time. Proper tuning, + * along with EM_RDTR, may improve traffic throughput in specific network + * conditions. + */ +#define EM_RADV 64 + + +/* + * This parameter controls the maximum no of times the driver will loop + * in the isr. + * Minimum Value = 1 + */ +#define EM_MAX_INTR 3 + +/* + * Inform the stack about transmit checksum offload capabilities. + */ +#define EM_CHECKSUM_FEATURES (CSUM_TCP | CSUM_UDP) + +/* + * This parameter controls the duration of transmit watchdog timer. + */ +#define EM_TX_TIMEOUT 5 /* set to 5 seconds */ + +/* + * This parameter controls when the driver calls the routine to reclaim + * transmit descriptors. + */ +#ifndef __rtems__ +#define EM_TX_CLEANUP_THRESHOLD EM_MAX_TXD / 8 +#else +#define EM_TX_CLEANUP_THRESHOLD (adapter->tx_cleanup_threshold) +#endif + +/* + * This parameter controls whether or not autonegotation is enabled. + * 0 - Disable autonegotiation + * 1 - Enable autonegotiation + */ +#define DO_AUTO_NEG 1 + +/* + * This parameter control whether or not the driver will wait for + * autonegotiation to complete. + * 1 - Wait for autonegotiation to complete + * 0 - Don't wait for autonegotiation to complete + */ +#define WAIT_FOR_AUTO_NEG_DEFAULT 0 + +/* + * EM_MASTER_SLAVE is only defined to enable a workaround for a known compatibility issue + * with 82541/82547 devices and some switches. See the "Known Limitations" section of + * the README file for a complete description and a list of affected switches. + * + * 0 = Hardware default + * 1 = Master mode + * 2 = Slave mode + * 3 = Auto master/slave + */ +/* #define EM_MASTER_SLAVE 2 */ + +/* Tunables -- End */ + +#define AUTONEG_ADV_DEFAULT (ADVERTISE_10_HALF | ADVERTISE_10_FULL | \ + ADVERTISE_100_HALF | ADVERTISE_100_FULL | \ + ADVERTISE_1000_FULL) + +#define EM_VENDOR_ID 0x8086 +#define EM_MMBA 0x0010 /* Mem base address */ +#define EM_ROUNDUP(size, unit) (((size) + (unit) - 1) & ~((unit) - 1)) + +#define EM_JUMBO_PBA 0x00000028 +#define EM_DEFAULT_PBA 0x00000030 +#define EM_SMARTSPEED_DOWNSHIFT 3 +#define EM_SMARTSPEED_MAX 15 + + +#define MAX_NUM_MULTICAST_ADDRESSES 128 +#define PCI_ANY_ID (~0U) +#define ETHER_ALIGN 2 + +/* Defines for printing debug information */ +#define DEBUG_INIT 0 +#define DEBUG_IOCTL 0 +#define DEBUG_HW 0 + +#define INIT_DEBUGOUT(S) if (DEBUG_INIT) printf(S "\n") +#define INIT_DEBUGOUT1(S, A) if (DEBUG_INIT) printf(S "\n", A) +#define INIT_DEBUGOUT2(S, A, B) if (DEBUG_INIT) printf(S "\n", A, B) +#define IOCTL_DEBUGOUT(S) if (DEBUG_IOCTL) printf(S "\n") +#define IOCTL_DEBUGOUT1(S, A) if (DEBUG_IOCTL) printf(S "\n", A) +#define IOCTL_DEBUGOUT2(S, A, B) if (DEBUG_IOCTL) printf(S "\n", A, B) +#define HW_DEBUGOUT(S) if (DEBUG_HW) printf(S "\n") +#define HW_DEBUGOUT1(S, A) if (DEBUG_HW) printf(S "\n", A) +#define HW_DEBUGOUT2(S, A, B) if (DEBUG_HW) printf(S "\n", A, B) + + +/* Supported RX Buffer Sizes */ +#define EM_RXBUFFER_2048 2048 +#define EM_RXBUFFER_4096 4096 +#define EM_RXBUFFER_8192 8192 +#define EM_RXBUFFER_16384 16384 + +#define EM_MAX_SCATTER 64 + +/* ****************************************************************************** + * vendor_info_array + * + * This array contains the list of Subvendor/Subdevice IDs on which the driver + * should load. + * + * ******************************************************************************/ +typedef struct _em_vendor_info_t { + unsigned int vendor_id; + unsigned int device_id; + unsigned int subvendor_id; + unsigned int subdevice_id; + unsigned int index; +} em_vendor_info_t; + + +struct em_buffer { + struct mbuf *m_head; +#ifndef __rtems__ + bus_dmamap_t map; /* bus_dma map for packet */ +#endif +}; + +/* + * Bus dma allocation structure used by + * em_dma_malloc and em_dma_free. + */ +struct em_dma_alloc { + bus_addr_t dma_paddr; /* 64bit in descriptors */ +#ifndef __rtems__ + caddr_t dma_vaddr; + bus_dma_tag_t dma_tag; + bus_dmamap_t dma_map; + bus_dma_segment_t dma_seg; + bus_size_t dma_size; + int dma_nseg; +#else + caddr_t dma_vaddr; + caddr_t malloc_base; +#endif +}; + +typedef enum _XSUM_CONTEXT_T { + OFFLOAD_NONE, + OFFLOAD_TCP_IP, + OFFLOAD_UDP_IP +} XSUM_CONTEXT_T; + +struct adapter; +struct em_int_delay_info { + struct adapter *adapter; /* Back-pointer to the adapter struct */ + int offset; /* Register offset to read/write */ + int value; /* Current value in usecs */ +}; + +/* For 82544 PCIX Workaround */ +typedef struct _ADDRESS_LENGTH_PAIR +{ + u_int64_t address; + u_int32_t length; +} ADDRESS_LENGTH_PAIR, *PADDRESS_LENGTH_PAIR; + +typedef struct _DESCRIPTOR_PAIR +{ + ADDRESS_LENGTH_PAIR descriptor[4]; + u_int32_t elements; +} DESC_ARRAY, *PDESC_ARRAY; + +/* Our adapter structure */ +struct adapter { + struct arpcom interface_data; + struct adapter *next; + struct adapter *prev; + struct em_hw hw; + + /* FreeBSD operating-system-specific structures */ + struct em_osdep osdep; +#ifndef __rtems__ + struct device *dev; + struct resource *res_memory; + struct resource *res_ioport; + struct resource *res_interrupt; + void *int_handler_tag; + struct ifmedia media; + struct callout timer; + struct callout tx_fifo_timer; + int io_rid; + struct ifmedia media; +#endif + u_int8_t unit; +#ifndef __rtems__ + struct mtx mtx; + int em_insert_vlan_header; +#else + device_t dev; + unsigned char irq_no; + unsigned char b,d,f; + rtems_id tid; +#endif + + /* Info about the board itself */ +#ifndef __rtems__ + u_int32_t part_num; +#else + uint32_t part_num; +#endif + u_int8_t link_active; + u_int16_t link_speed; + u_int16_t link_duplex; + u_int32_t smartspeed; + struct em_int_delay_info tx_int_delay; + struct em_int_delay_info tx_abs_int_delay; + struct em_int_delay_info rx_int_delay; + struct em_int_delay_info rx_abs_int_delay; + + XSUM_CONTEXT_T active_checksum_context; + + /* + * Transmit definitions + * + * We have an array of num_tx_desc descriptors (handled + * by the controller) paired with an array of tx_buffers + * (at tx_buffer_area). + * The index of the next available descriptor is next_avail_tx_desc. + * The number of remaining tx_desc is num_tx_desc_avail. + */ + struct em_dma_alloc txdma; /* bus_dma glue for tx desc */ + struct em_tx_desc *tx_desc_base; + u_int32_t next_avail_tx_desc; + u_int32_t oldest_used_tx_desc; + volatile u_int16_t num_tx_desc_avail; + u_int16_t num_tx_desc; + u_int32_t txd_cmd; + struct em_buffer *tx_buffer_area; +#ifndef __rtems__ + bus_dma_tag_t txtag; /* dma tag for tx */ +#endif +#ifdef __rtems__ + u_int16_t tx_cleanup_threshold; +#endif + + /* + * Receive definitions + * + * we have an array of num_rx_desc rx_desc (handled by the + * controller), and paired with an array of rx_buffers + * (at rx_buffer_area). + * The next pair to check on receive is at offset next_rx_desc_to_check + */ + struct em_dma_alloc rxdma; /* bus_dma glue for rx desc */ + struct em_rx_desc *rx_desc_base; + u_int32_t next_rx_desc_to_check; + u_int16_t num_rx_desc; + u_int32_t rx_buffer_len; + struct em_buffer *rx_buffer_area; +#ifndef __rtems__ + bus_dma_tag_t rxtag; +#endif + + /* Jumbo frame */ + struct mbuf *fmp; + struct mbuf *lmp; + + /* Misc stats maintained by the driver */ + unsigned long dropped_pkts; + unsigned long mbuf_alloc_failed; + unsigned long mbuf_cluster_failed; + unsigned long no_tx_desc_avail1; + unsigned long no_tx_desc_avail2; + unsigned long no_tx_map_avail; + unsigned long no_tx_dma_setup; + + /* Used in for 82547 10Mb Half workaround */ + #define EM_PBA_BYTES_SHIFT 0xA + #define EM_TX_HEAD_ADDR_SHIFT 7 + #define EM_PBA_TX_MASK 0xFFFF0000 + #define EM_FIFO_HDR 0x10 + + #define EM_82547_PKT_THRESH 0x3e0 + + u_int32_t tx_fifo_size; + u_int32_t tx_fifo_head; + u_int32_t tx_fifo_head_addr; + u_int64_t tx_fifo_reset_cnt; + u_int64_t tx_fifo_wrk_cnt; + u_int32_t tx_head_addr; + + /* For 82544 PCIX Workaround */ + boolean_t pcix_82544; + boolean_t in_detach; + + struct em_hw_stats stats; +}; + +#define EM_LOCK_INIT(_sc, _name) \ + mtx_init(&(_sc)->mtx, _name, MTX_NETWORK_LOCK, MTX_DEF) +#define EM_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->mtx) +#define EM_LOCK(_sc) mtx_lock(&(_sc)->mtx) +#define EM_UNLOCK(_sc) mtx_unlock(&(_sc)->mtx) +#define EM_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->mtx, MA_OWNED) + +#ifdef __rtems__ +/* Initialize bare minimals so we can check the phy link status; + * 'rtems_em_pci_setup()' must have been run on the device already! + */ +int +em_hw_early_init(device_t dev); +#endif + + +#endif /* _EM_H_DEFINED_ */ |