summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSebastian Huber <sebastian.huber@embedded-brains.de>2014-04-22 10:15:39 +0200
committerSebastian Huber <sebastian.huber@embedded-brains.de>2014-04-28 09:26:19 +0200
commit7c0bd74c87b141454ae17ee1cfeeba42dc4b0df2 (patch)
treecda34ba07b75edb4e4bf9e39424adfd785cfcc3f
parentsparc: Document register g7 usage (diff)
downloadrtems-7c0bd74c87b141454ae17ee1cfeeba42dc4b0df2.tar.bz2
sparc: Add _CPU_Get_current_per_CPU_control()
Use register g6 for the per-CPU control of the current processor. The register g6 is reserved for the operating system by the SPARC ABI. On Linux register g6 is used for a similar purpose with the same method since 1996. The register g6 must be initialized during system startup and then must remain unchanged. Since the per-CPU control is used in all critical sections of the operating system, this is a performance optimization for the operating system core procedures. An additional benefit is that the low-level context switch and interrupt processing code is now identical on non-SMP and SMP configurations.
-rw-r--r--c/src/lib/libbsp/sparc/shared/irq_asm.S68
-rw-r--r--c/src/lib/libbsp/sparc/shared/start/start.S25
-rw-r--r--cpukit/score/cpu/sparc/cpu.c1
-rw-r--r--cpukit/score/cpu/sparc/rtems/score/cpu.h68
-rw-r--r--doc/cpu_supplement/sparc.t5
5 files changed, 74 insertions, 93 deletions
diff --git a/c/src/lib/libbsp/sparc/shared/irq_asm.S b/c/src/lib/libbsp/sparc/shared/irq_asm.S
index fd8269f0ce..c0ba47919a 100644
--- a/c/src/lib/libbsp/sparc/shared/irq_asm.S
+++ b/c/src/lib/libbsp/sparc/shared/irq_asm.S
@@ -23,23 +23,6 @@
#include <rtems/score/percpu.h>
#include <bspopts.h>
-.macro GET_SELF_CPU_CONTROL REG, TMP
- sethi %hi(_Per_CPU_Information), \REG
- add \REG, %lo(_Per_CPU_Information), \REG
-
-#if defined( RTEMS_SMP )
-#if BSP_LEON3_SMP
- /* LEON3 SMP support */
- rd %asr17, \TMP
- srl \TMP, LEON3_ASR17_PROCESSOR_INDEX_SHIFT, \TMP
-#else
- mov 0, \TMP
-#endif
- sll \TMP, PER_CPU_CONTROL_SIZE_LOG2, \TMP
- add \REG, \TMP, \REG
-#endif /* defined( RTEMS_SMP ) */
-.endm
-
/*
* void _CPU_Context_switch(
* Context_Control *run,
@@ -53,7 +36,7 @@
PUBLIC(_CPU_Context_switch)
SYM(_CPU_Context_switch):
st %g5, [%o0 + G5_OFFSET] ! save the global registers
- std %g6, [%o0 + G6_OFFSET]
+ st %g7, [%o0 + G7_OFFSET]
std %l0, [%o0 + L0_OFFSET] ! save the local registers
std %l2, [%o0 + L2_OFFSET]
@@ -67,11 +50,8 @@ SYM(_CPU_Context_switch):
std %o6, [%o0 + O6_SP_OFFSET] ! save the output registers
- ! o3 = self per-CPU control
- GET_SELF_CPU_CONTROL %o3, %o4
-
! load the ISR stack nesting prevention flag
- ld [%o3 + SPARC_PER_CPU_ISR_DISPATCH_DISABLE], %o4
+ ld [%g6 + SPARC_PER_CPU_ISR_DISPATCH_DISABLE], %o4
! save it a bit later so we do not waste a couple of cycles
rd %psr, %o2
@@ -84,7 +64,6 @@ SYM(_CPU_Context_switch):
* This is entered from _CPU_Context_restore with:
* o1 = context to restore
* o2 = psr
- * o3 = self per-CPU control
*/
PUBLIC(_CPU_Context_restore_heir)
@@ -185,7 +164,7 @@ done_flushing:
nop
ld [%o1 + G5_OFFSET], %g5 ! restore the global registers
- ldd [%o1 + G6_OFFSET], %g6
+ ld [%o1 + G7_OFFSET], %g7
! Load thread specific ISR dispatch prevention flag
ld [%o1 + ISR_DISPATCH_DISABLE_STACK_OFFSET], %o2
@@ -197,7 +176,7 @@ done_flushing:
ldd [%o1 + L6_OFFSET], %l6
! Now restore thread specific ISR dispatch prevention flag
- st %o2, [%o3 + SPARC_PER_CPU_ISR_DISPATCH_DISABLE]
+ st %o2, [%g6 + SPARC_PER_CPU_ISR_DISPATCH_DISABLE]
ldd [%o1 + I0_OFFSET], %i0 ! restore the input registers
ldd [%o1 + I2_OFFSET], %i2
@@ -223,7 +202,6 @@ done_flushing:
SYM(_CPU_Context_restore):
save %sp, -CPU_MINIMUM_STACK_FRAME_SIZE, %sp
rd %psr, %o2
- GET_SELF_CPU_CONTROL %o3, %o4
ba SYM(_CPU_Context_restore_heir)
mov %i0, %o1 ! in the delay slot
@@ -352,7 +330,7 @@ save_isf:
st %g1, [%sp + ISF_G1_OFFSET] ! save g1
std %g2, [%sp + ISF_G2_OFFSET] ! save g2, g3
std %l4, [%sp + ISF_G4_OFFSET] ! save g4, g5 -- see above
- std %g6, [%sp + ISF_G6_OFFSET] ! save g6, g7
+ st %g7, [%sp + ISF_G7_OFFSET] ! save g7
std %i0, [%sp + ISF_I0_OFFSET] ! save i0, i1
std %i2, [%sp + ISF_I2_OFFSET] ! save i2, i3
@@ -370,24 +348,21 @@ save_isf:
*
* Register usage for this section:
*
- * l5 = per cpu info pointer
* l6 = _Thread_Dispatch_disable_level value
* l7 = _ISR_Nest_level value
*
- * NOTE: It is assumed that l5 - l7 will be preserved until the ISR
+ * NOTE: It is assumed that l6 - l7 will be preserved until the ISR
* nest and thread dispatch disable levels are unnested.
*/
- GET_SELF_CPU_CONTROL %l5, %l7
-
- ld [%l5 + PER_CPU_ISR_NEST_LEVEL], %l7
- ld [%l5 + PER_CPU_THREAD_DISPATCH_DISABLE_LEVEL], %l6
+ ld [%g6 + PER_CPU_ISR_NEST_LEVEL], %l7
+ ld [%g6 + PER_CPU_THREAD_DISPATCH_DISABLE_LEVEL], %l6
add %l7, 1, %l7
- st %l7, [%l5 + PER_CPU_ISR_NEST_LEVEL]
+ st %l7, [%g6 + PER_CPU_ISR_NEST_LEVEL]
add %l6, 1, %l6
- st %l6, [%l5 + PER_CPU_THREAD_DISPATCH_DISABLE_LEVEL]
+ st %l6, [%g6 + PER_CPU_THREAD_DISPATCH_DISABLE_LEVEL]
/*
* If ISR nest level was zero (now 1), then switch stack.
@@ -405,7 +380,7 @@ save_isf:
nop
#endif
- ld [%l5 + PER_CPU_INTERRUPT_STACK_HIGH], %sp
+ ld [%g6 + PER_CPU_INTERRUPT_STACK_HIGH], %sp
dont_switch_stacks:
/*
@@ -468,7 +443,7 @@ dont_fix_pil2:
ld [%l4], %o2 ! o2 = 3rd arg = interrupt exit instant
mov %l3, %o1 ! o1 = 2nd arg = interrupt entry instant
call SYM(_Profiling_Outer_most_interrupt_entry_and_exit), 0
- mov %l5, %o0 ! o0 = 1st arg = per-CPU control
+ mov %g6, %o0 ! o0 = 1st arg = per-CPU control
profiling_not_outer_most_exit:
#else
nop ! delay slot
@@ -489,15 +464,14 @@ profiling_not_outer_most_exit:
*
* Register usage for this section:
*
- * l5 = per cpu info pointer
* l6 = _Thread_Dispatch_disable_level value
* l7 = _ISR_Nest_level value
*/
- st %l7, [%l5 + PER_CPU_ISR_NEST_LEVEL]
+ st %l7, [%g6 + PER_CPU_ISR_NEST_LEVEL]
sub %l6, 1, %l6
- st %l6, [%l5 + PER_CPU_THREAD_DISPATCH_DISABLE_LEVEL]
+ st %l6, [%g6 + PER_CPU_THREAD_DISPATCH_DISABLE_LEVEL]
/*
* If dispatching is disabled (includes nested interrupt case),
@@ -509,7 +483,7 @@ profiling_not_outer_most_exit:
nop
! Are we dispatching from a previous ISR in the interrupted thread?
- ld [%l5 + SPARC_PER_CPU_ISR_DISPATCH_DISABLE], %l7
+ ld [%g6 + SPARC_PER_CPU_ISR_DISPATCH_DISABLE], %l7
orcc %l7, %g0, %g0 ! Is this thread already doing an ISR?
bnz simple_return ! Yes, then do a "simple" exit
nop
@@ -520,7 +494,7 @@ profiling_not_outer_most_exit:
* return to the interrupt dispatcher.
*/
- ldub [%l5 + PER_CPU_DISPATCH_NEEDED], %l6
+ ldub [%g6 + PER_CPU_DISPATCH_NEEDED], %l6
orcc %l6, %g0, %g0 ! Is thread switch necessary?
bz simple_return ! no, then do a simple return
@@ -532,7 +506,7 @@ profiling_not_outer_most_exit:
! Set ISR dispatch nesting prevention flag
mov 1,%l6
- st %l6, [%l5 + SPARC_PER_CPU_ISR_DISPATCH_DISABLE]
+ st %l6, [%g6 + SPARC_PER_CPU_ISR_DISPATCH_DISABLE]
/*
* The following subtract should get us back on the interrupted
@@ -569,9 +543,7 @@ isr_dispatch:
* _Thread_Dispatch before leaving this ISR Dispatch context.
*/
- GET_SELF_CPU_CONTROL %l5, %l7
-
- ldub [%l5 + PER_CPU_DISPATCH_NEEDED], %l7
+ ldub [%g6 + PER_CPU_DISPATCH_NEEDED], %l7
orcc %l7, %g0, %g0 ! Is thread switch necesary?
bz allow_nest_again ! No, then clear out and return
@@ -587,7 +559,7 @@ dispatchAgain:
allow_nest_again:
! Zero out ISR stack nesting prevention flag
- st %g0, [%l5 + SPARC_PER_CPU_ISR_DISPATCH_DISABLE]
+ st %g0, [%g6 + SPARC_PER_CPU_ISR_DISPATCH_DISABLE]
/*
* The CWP in place at this point may be different from
@@ -619,7 +591,7 @@ simple_return:
! g1 is restored later
ldd [%fp + ISF_G2_OFFSET], %g2 ! restore g2, g3
ldd [%fp + ISF_G4_OFFSET], %g4 ! restore g4, g5
- ldd [%fp + ISF_G6_OFFSET], %g6 ! restore g6, g7
+ ld [%fp + ISF_G7_OFFSET], %g7 ! restore g7
ldd [%fp + ISF_I0_OFFSET], %i0 ! restore i0, i1
ldd [%fp + ISF_I2_OFFSET], %i2 ! restore i2, i3
diff --git a/c/src/lib/libbsp/sparc/shared/start/start.S b/c/src/lib/libbsp/sparc/shared/start/start.S
index 3df9d479eb..ccf789ea9c 100644
--- a/c/src/lib/libbsp/sparc/shared/start/start.S
+++ b/c/src/lib/libbsp/sparc/shared/start/start.S
@@ -222,6 +222,9 @@ SYM(hard_reset):
nop
nop
+ sethi %hi(_Per_CPU_Information), %g6 ! get per-CPU control
+ add %g6, %lo(_Per_CPU_Information), %g6
+
#if defined(START_LEON3_ENABLE_SMP)
rd %asr17, %o0 ! get CPU identifier
srl %o0, LEON3_ASR17_PROCESSOR_INDEX_SHIFT, %o0
@@ -230,12 +233,10 @@ SYM(hard_reset):
beq cpu0
nop
- sethi %hi(_Per_CPU_Information), %o1 ! get per-CPU control
- add %o1, %lo(_Per_CPU_Information), %o1
- sll %o0, PER_CPU_CONTROL_SIZE_LOG2, %o2
- add %o1, %o2, %o1
+ sll %o0, PER_CPU_CONTROL_SIZE_LOG2, %l0
+ add %g6, %l0, %g6
- ld [%o1 + PER_CPU_INTERRUPT_STACK_HIGH], %sp ! set stack pointer
+ ld [%g6 + PER_CPU_INTERRUPT_STACK_HIGH], %sp ! set stack pointer
sub %sp, 4, %sp ! stack starts at end of area - 4
andn %sp, 0x0f, %sp ! align stack on 16-byte boundary
mov %sp, %fp ! set frame pointer
@@ -247,8 +248,8 @@ SYM(hard_reset):
cpu0:
#endif
- set (SYM(rdb_start)), %g6 ! End of RAM
- st %sp, [%g6]
+ set (SYM(rdb_start)), %g5 ! End of RAM
+ st %sp, [%g5]
sub %sp, 4, %sp ! stack starts at end of RAM - 4
andn %sp, 0x0f, %sp ! align stack on 16-byte boundary
mov %sp, %fp ! Set frame pointer
@@ -300,12 +301,12 @@ cpu0:
set SYM(RAM_START), %l1 ! Cannot use RAM_END due to bug in linker
set SYM(RAM_SIZE), %l2
add %l1, %l2, %sp
- st %sp, [%g6]
+ st %sp, [%g5]
- set SYM(CLOCK_SPEED), %g6 ! Use 14 MHz in simulator
+ set SYM(CLOCK_SPEED), %g5 ! Use 14 MHz in simulator
set 14, %g1
- st %g1, [%g6]
+ st %g1, [%g5]
2:
#endif
@@ -332,8 +333,8 @@ cpu0:
nop
copy_data:
- ldd [ %g2 ], %g6
- std %g6 , [ %g3 ] ! copy this double word
+ ldd [ %g2 ], %g5
+ std %g5 , [ %g3 ] ! copy this double word
add %g3, 8, %g3 ! bump the destination pointer
add %g2, 8, %g2 ! bump the source pointer
cmp %g3, %g4 ! Is the pointer past the end of dest?
diff --git a/cpukit/score/cpu/sparc/cpu.c b/cpukit/score/cpu/sparc/cpu.c
index 463ff4736c..6c124db4d2 100644
--- a/cpukit/score/cpu/sparc/cpu.c
+++ b/cpukit/score/cpu/sparc/cpu.c
@@ -36,7 +36,6 @@ RTEMS_STATIC_ASSERT(
)
SPARC_ASSERT_OFFSET(g5, G5);
-SPARC_ASSERT_OFFSET(g6, G6);
SPARC_ASSERT_OFFSET(g7, G7);
RTEMS_STATIC_ASSERT(
diff --git a/cpukit/score/cpu/sparc/rtems/score/cpu.h b/cpukit/score/cpu/sparc/rtems/score/cpu.h
index 3e331348da..50da44cf4b 100644
--- a/cpukit/score/cpu/sparc/rtems/score/cpu.h
+++ b/cpukit/score/cpu/sparc/rtems/score/cpu.h
@@ -408,14 +408,14 @@ typedef struct {
* The registers g2 through g4 are reserved for applications. GCC uses them as
* volatile registers by default. So they are treated like volatile registers
* in RTEMS as well.
+ *
+ * The register g6 contains the per-CPU control of the current processor. It
+ * is an invariant of the processor context. This register must not be saved
+ * and restored during context switches or interrupt services.
*/
typedef struct {
- /** This will contain reserved space for alignment. */
- uint32_t reserved_for_alignment;
/** This will contain the contents of the g5 register. */
uint32_t g5;
- /** This will contain the contents of the g6 register. */
- uint32_t g6;
/** This will contain the contents of the g7 register. */
uint32_t g7;
@@ -490,55 +490,53 @@ typedef struct {
*/
/** This macro defines an offset into the context for use in assembly. */
-#define G5_OFFSET 0x04
-/** This macro defines an offset into the context for use in assembly. */
-#define G6_OFFSET 0x08
+#define G5_OFFSET 0x00
/** This macro defines an offset into the context for use in assembly. */
-#define G7_OFFSET 0x0C
+#define G7_OFFSET 0x04
/** This macro defines an offset into the context for use in assembly. */
-#define L0_OFFSET 0x10
+#define L0_OFFSET 0x08
/** This macro defines an offset into the context for use in assembly. */
-#define L1_OFFSET 0x14
+#define L1_OFFSET 0x0C
/** This macro defines an offset into the context for use in assembly. */
-#define L2_OFFSET 0x18
+#define L2_OFFSET 0x10
/** This macro defines an offset into the context for use in assembly. */
-#define L3_OFFSET 0x1C
+#define L3_OFFSET 0x14
/** This macro defines an offset into the context for use in assembly. */
-#define L4_OFFSET 0x20
+#define L4_OFFSET 0x18
/** This macro defines an offset into the context for use in assembly. */
-#define L5_OFFSET 0x24
+#define L5_OFFSET 0x1C
/** This macro defines an offset into the context for use in assembly. */
-#define L6_OFFSET 0x28
+#define L6_OFFSET 0x20
/** This macro defines an offset into the context for use in assembly. */
-#define L7_OFFSET 0x2C
+#define L7_OFFSET 0x24
/** This macro defines an offset into the context for use in assembly. */
-#define I0_OFFSET 0x30
+#define I0_OFFSET 0x28
/** This macro defines an offset into the context for use in assembly. */
-#define I1_OFFSET 0x34
+#define I1_OFFSET 0x2C
/** This macro defines an offset into the context for use in assembly. */
-#define I2_OFFSET 0x38
+#define I2_OFFSET 0x30
/** This macro defines an offset into the context for use in assembly. */
-#define I3_OFFSET 0x3C
+#define I3_OFFSET 0x34
/** This macro defines an offset into the context for use in assembly. */
-#define I4_OFFSET 0x40
+#define I4_OFFSET 0x38
/** This macro defines an offset into the context for use in assembly. */
-#define I5_OFFSET 0x44
+#define I5_OFFSET 0x3C
/** This macro defines an offset into the context for use in assembly. */
-#define I6_FP_OFFSET 0x48
+#define I6_FP_OFFSET 0x40
/** This macro defines an offset into the context for use in assembly. */
-#define I7_OFFSET 0x4C
+#define I7_OFFSET 0x44
/** This macro defines an offset into the context for use in assembly. */
-#define O6_SP_OFFSET 0x50
+#define O6_SP_OFFSET 0x48
/** This macro defines an offset into the context for use in assembly. */
-#define O7_OFFSET 0x54
+#define O7_OFFSET 0x4C
/** This macro defines an offset into the context for use in assembly. */
-#define PSR_OFFSET 0x58
+#define PSR_OFFSET 0x50
/** This macro defines an offset into the context for use in assembly. */
-#define ISR_DISPATCH_DISABLE_STACK_OFFSET 0x5C
+#define ISR_DISPATCH_DISABLE_STACK_OFFSET 0x54
/** This defines the size of the context area for use in assembly. */
#define CONTEXT_CONTROL_SIZE 0x68
@@ -661,8 +659,8 @@ typedef struct {
uint32_t g4;
/** This is the offset of the g5 register on an ISF. */
uint32_t g5;
- /** This is the offset of the g6 register on an ISF. */
- uint32_t g6;
+ /** This is the offset is reserved for alignment on an ISF. */
+ uint32_t reserved_for_alignment;
/** This is the offset of the g7 register on an ISF. */
uint32_t g7;
/** This is the offset of the i0 register on an ISF. */
@@ -712,8 +710,6 @@ typedef struct {
/** This macro defines an offset into the ISF for use in assembly. */
#define ISF_G5_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x1c
/** This macro defines an offset into the ISF for use in assembly. */
-#define ISF_G6_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x20
-/** This macro defines an offset into the ISF for use in assembly. */
#define ISF_G7_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x24
/** This macro defines an offset into the ISF for use in assembly. */
#define ISF_I0_OFFSET CPU_MINIMUM_STACK_FRAME_SIZE + 0x28
@@ -1156,6 +1152,14 @@ void _CPU_Context_restore(
Context_Control *new_context
) RTEMS_COMPILER_NO_RETURN_ATTRIBUTE;
+/**
+ * @brief The pointer to the current per-CPU control is available via register
+ * g6.
+ */
+register struct Per_CPU_Control *_SPARC_Per_CPU_current asm( "g6" );
+
+#define _CPU_Get_current_per_CPU_control() ( _SPARC_Per_CPU_current )
+
#if defined(RTEMS_SMP)
uint32_t _CPU_SMP_Initialize( void );
diff --git a/doc/cpu_supplement/sparc.t b/doc/cpu_supplement/sparc.t
index a6862c8aa2..d0b7641e28 100644
--- a/doc/cpu_supplement/sparc.t
+++ b/doc/cpu_supplement/sparc.t
@@ -401,6 +401,11 @@ The registers g2 through g4 are reserved for applications. GCC uses them as
volatile registers by default. So they are treated like volatile registers in
RTEMS as well.
+The register g6 is reserved for the operating system and contains the address
+of the per-CPU control block of the current processor. This register is
+initialized during system start and then remains unchanged. It is not
+saved/restored by the context switch or interrupt processing code.
+
The register g7 is reserved for the operating system and contains the thread
pointer used for thread-local storage (TLS) as mandated by the SPARC ABI.