avr/avrtest: Remove (obselete).

Updates #2442.

13 files changed, 0 insertions, 1216 deletions

diff --git a/c/src/lib/libbsp/avr/acinclude.m4 b/c/src/lib/libbsp/avr/acinclude.m4
index fead999a77..296a6f7882 100644
--- a/c/src/lib/libbsp/avr/acinclude.m4
+++ b/c/src/lib/libbsp/avr/acinclude.m4
@@ -2,8 +2,6 @@
 AC_DEFUN([RTEMS_CHECK_BSPDIR],
 [
   case "$1" in
-  avrtest )
-    AC_CONFIG_SUBDIRS([avrtest]);;
   *)
     AC_MSG_ERROR([Invalid BSP]);;
   esac
diff --git a/c/src/lib/libbsp/avr/avrtest/Makefile.am b/c/src/lib/libbsp/avr/avrtest/Makefile.am
deleted file mode 100644
index c164339b86..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/Makefile.am
+++ /dev/null
@@ -1,47 +0,0 @@
-ACLOCAL_AMFLAGS = -I ../../../../aclocal
-
-include $(top_srcdir)/../../../../automake/compile.am
-include $(top_srcdir)/../../bsp.am
-
-include_bspdir = $(includedir)/bsp
-
-dist_project_lib_DATA = bsp_specs
-
-include_HEADERS = include/bsp.h
-include_HEADERS += ../../shared/include/tm27.h
-
-nodist_include_HEADERS = include/bspopts.h
-nodist_include_bsp_HEADERS = ../../shared/include/bootcard.h
-nodist_include_bsp_HEADERS += ../../shared/include/console-polled.h
-DISTCLEANFILES = include/bspopts.h
-noinst_PROGRAMS =
-
-nodist_include_HEADERS += ../../shared/include/coverhd.h
-
-EXTRA_DIST = start/start.S
-start.$(OBJEXT): start/start.S
-	$(CPPASCOMPILE) -o $@ -c $<
-project_lib_DATA = start.$(OBJEXT)
-
-dist_project_lib_DATA += startup/linkcmds
-
-startup_SOURCES = ../../shared/bspclean.c ../../shared/bsplibc.c \
-    ../../shared/bsppredriverhook.c \
-    ../../shared/bspgetworkarea.c ../../shared/bsppost.c \
-    ../../shared/bspstart.c ../../shared/bootcard.c ../../shared/sbrk.c \
-    ../../shared/gnatinstallhandler.c
-clock_SOURCES = ../../shared/clock_driver_simidle.c
-console_SOURCES = ../../shared/console-polled.c console/console-io.c
-timer_SOURCES = ../../shared/timerstub.c
-
-noinst_LIBRARIES = libbsp.a
-libbsp_a_SOURCES = $(startup_SOURCES) $(clock_SOURCES) $(console_SOURCES) \
-    $(timer_SOURCES)
-
-# Cache
-libbsp_a_SOURCES += ../../../libcpu/shared/src/cache_manager.c
-libbsp_a_SOURCES += ../../shared/include/cache_.h
-libbsp_a_CPPFLAGS = -I$(srcdir)/../../shared/include
-
-include $(srcdir)/preinstall.am
-include $(top_srcdir)/../../../../automake/local.am
diff --git a/c/src/lib/libbsp/avr/avrtest/README b/c/src/lib/libbsp/avr/avrtest/README
deleted file mode 100644
index ac097e4dbd..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/README
+++ /dev/null
@@ -1,33 +0,0 @@
-This BSP is designed to operate on the AVR Mega128 variants.
-
-It has been run on AVRTEST and SIMULAVRXX simulators.
-
-
-AVRTEST:
-
-Download from sourceforge.net:
-
-cvs -d:pserver:anonymous@winavr.cvs.sourceforge.net:/cvsroot/winavr login
-cvs -z3 -d:pserver:anonymous@winavr.cvs.sourceforge.net:/cvsroot/winavr \
-   co -P avrtest
-
-
-SIMULAVRXX:
-
-Download from http://savannah.nongnu.org/projects/simulavr/
-
-CVS is the only way to get the source at this time. Check project home page for updates.
-
-cvs -z3 -d:pserver:anonymous@cvs.savannah.nongnu.org:/sources/simulavr co simulavrxx
-
-here is an example of using simulavrxx with the hello world test example.
-
-while in .../samples/hello
-
-simulavr -d atmega128 -f hello.exe -W0x52,/dev/stderr -Texit 
-
-to get the help page:
-
-simulavr -h
-
-
diff --git a/c/src/lib/libbsp/avr/avrtest/bsp_specs b/c/src/lib/libbsp/avr/avrtest/bsp_specs
deleted file mode 100644
index 5457e23a4d..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/bsp_specs
+++ /dev/null
@@ -1,15 +0,0 @@
-%rename endfile old_endfile
-%rename startfile old_startfile
-%rename link old_link
-
-*startfile:
-%{!qrtems: %(old_startfile)} \
-%{!nostdlib: %{qrtems: start.o%s -e __init}}
-
-*endfile:
-%{!qrtems: %(old_endfile)} \
-%{!nostdlib: %{qrtems:}}
-
-*link:
-%(old_link) %{!qrtems: %(old_link)} %{qrtems: -dc -dp -N}
-
diff --git a/c/src/lib/libbsp/avr/avrtest/configure.ac b/c/src/lib/libbsp/avr/avrtest/configure.ac
deleted file mode 100644
index 7b18258c26..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/configure.ac
+++ /dev/null
@@ -1,20 +0,0 @@
-## Process this file with autoconf to produce a configure script.
-
-AC_PREREQ([2.69])
-AC_INIT([rtems-c-src-lib-libbsp-h8300-h8sim],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
-AC_CONFIG_SRCDIR([bsp_specs])
-RTEMS_TOP(../../../../../..)
-
-RTEMS_CANONICAL_TARGET_CPU
-AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2])
-RTEMS_BSP_CONFIGURE
-
-RTEMS_PROG_CC_FOR_TARGET
-RTEMS_CANONICALIZE_TOOLS
-RTEMS_PROG_CCAS
-
-RTEMS_BSP_CLEANUP_OPTIONS(0, 0)
-
-# Explicitly list all Makefiles here
-AC_CONFIG_FILES([Makefile])
-AC_OUTPUT
diff --git a/c/src/lib/libbsp/avr/avrtest/console/console-io.c b/c/src/lib/libbsp/avr/avrtest/console/console-io.c
deleted file mode 100644
index f02ad5dfb6..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/console/console-io.c
+++ /dev/null
@@ -1,68 +0,0 @@
-/*
- *  This file contains the hardware specific portions of the TTY driver
- *  for the serial ports on the avr.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2008.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#include <bsp.h>
-#include <bsp/console-polled.h>
-#include <rtems/libio.h>
-#include <stdlib.h>
-#include <assert.h>
-
-#define STDIO_PORT      0x52
-#define EXIT_PORT       0x4F
-#define ABORT_PORT      0x49
-
-/*
- *  console_initialize_hardware
- *
- *  This routine initializes the console hardware.
- *
- */
-
-void console_initialize_hardware(void)
-{
-  return;
-}
-
-/*
- *  console_outbyte_polled
- *
- *  This routine transmits a character using polling.
- */
-void console_outbyte_polled(
-  int  port,
-  char ch
-)
-{
-  *((volatile unsigned char *) STDIO_PORT) = ch;
-}
-
-/*
- *  console_inbyte_nonblocking
- *
- *  This routine polls for a character.
- */
-
-int console_inbyte_nonblocking(
-  int port
-)
-{
-  return -1;
-}
-
-#include <rtems/bspIo.h>
-
-static void AVRsimBSP_output_char(char c) { console_outbyte_polled( 0, c ); }
-
-BSP_output_char_function_type           BSP_output_char = AVRsimBSP_output_char;
-BSP_polling_getchar_function_type       BSP_poll_char = NULL;
diff --git a/c/src/lib/libbsp/avr/avrtest/include/bsp.h b/c/src/lib/libbsp/avr/avrtest/include/bsp.h
deleted file mode 100644
index 1a1613981d..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/include/bsp.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*  bsp.h
- *
- *  This include file contains some definitions specific to the
- *  h8 simulator in gdb.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef LIBBSP_AVR_AVRTEST_BSP_H
-#define LIBBSP_AVR_AVRTEST_BSP_H
-
-#include <bspopts.h>
-#include <bsp/default-initial-extension.h>
-
-#include <rtems.h>
-#include <rtems/iosupp.h>
-#include <rtems/console.h>
-#include <rtems/clockdrv.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/* support for simulated clock tick */
-Thread clock_driver_sim_idle_body(uintptr_t);
-#define BSP_IDLE_TASK_BODY clock_driver_sim_idle_body
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/c/src/lib/libbsp/avr/avrtest/make/custom/avrtest-testsuite.tcfg b/c/src/lib/libbsp/avr/avrtest/make/custom/avrtest-testsuite.tcfg
deleted file mode 100644
index 91d7c1bbfd..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/make/custom/avrtest-testsuite.tcfg
+++ /dev/null
@@ -1,12 +0,0 @@
-#
-# The GDB AVR Simulator does not have a tick interrupt.
-#
-
-include: testdata/require-tick-isr.tcfg
-include: testdata/disable-jffs2-tests.tcfg
-include: testdata/disable-mrfs-tests.tcfg
-
-capture01
-fsbdpart01
-fsdosfsformat01
-fsdosfswrite01
diff --git a/c/src/lib/libbsp/avr/avrtest/make/custom/avrtest.cfg b/c/src/lib/libbsp/avr/avrtest/make/custom/avrtest.cfg
deleted file mode 100644
index e4857cd2ff..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/make/custom/avrtest.cfg
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-#  Config file for the AVR ATmega128 on avrtest Simulator
-#
-
-include $(RTEMS_ROOT)/make/custom/default.cfg
-
-RTEMS_CPU=avr
-RTEMS_CPU_MODEL=mega128
-
-#  This contains the compiler options necessary to select the CPU model
-#  and (hopefully) optimize for it.
-CPU_CFLAGS = -mmcu=atmega128 
-
-# optimize flag: typically -O2
-CFLAGS_OPTIMIZE_V = -Os -g
diff --git a/c/src/lib/libbsp/avr/avrtest/preinstall.am b/c/src/lib/libbsp/avr/avrtest/preinstall.am
deleted file mode 100644
index f3d7d235a6..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/preinstall.am
+++ /dev/null
@@ -1,71 +0,0 @@
-## Automatically generated by ampolish3 - Do not edit
-
-if AMPOLISH3
-$(srcdir)/preinstall.am: Makefile.am
-	$(AMPOLISH3) $(srcdir)/Makefile.am > $(srcdir)/preinstall.am
-endif
-
-PREINSTALL_DIRS =
-DISTCLEANFILES += $(PREINSTALL_DIRS)
-
-all-am: $(PREINSTALL_FILES)
-
-PREINSTALL_FILES =
-CLEANFILES = $(PREINSTALL_FILES)
-
-all-local: $(TMPINSTALL_FILES)
-
-TMPINSTALL_FILES =
-CLEANFILES += $(TMPINSTALL_FILES)
-
-$(PROJECT_LIB)/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_LIB)
-	@: > $(PROJECT_LIB)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp)
-
-$(PROJECT_INCLUDE)/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_INCLUDE)
-	@: > $(PROJECT_INCLUDE)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp)
-
-$(PROJECT_INCLUDE)/bsp/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_INCLUDE)/bsp
-	@: > $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-
-$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs
-PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs
-
-$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h
-
-$(PROJECT_INCLUDE)/tm27.h: ../../shared/include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
-
-$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
-
-$(PROJECT_INCLUDE)/bsp/bootcard.h: ../../shared/include/bootcard.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/bootcard.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/bootcard.h
-
-$(PROJECT_INCLUDE)/bsp/console-polled.h: ../../shared/include/console-polled.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/console-polled.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/console-polled.h
-
-$(PROJECT_INCLUDE)/coverhd.h: ../../shared/include/coverhd.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/coverhd.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/coverhd.h
-
-$(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT)
-TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT)
-
-$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds
-PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds
-
diff --git a/c/src/lib/libbsp/avr/avrtest/start/macros.inc b/c/src/lib/libbsp/avr/avrtest/start/macros.inc
deleted file mode 100644
index ddeb85d366..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/start/macros.inc
+++ /dev/null
@@ -1,364 +0,0 @@
-/* Copyright (c) 2002, 2005, 2006, 2007 Marek Michalkiewicz
-   Copyright (c) 2006 Dmitry Xmelkov
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-   * Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   * Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   * Neither the name of the copyright holders nor the names of
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-  POSSIBILITY OF SUCH DAMAGE. */
-
-/*
-   macros.inc - macros for use in assembler sources
-
-   Contributors:
-     Created by Marek Michalkiewicz <marekm@linux.org.pl>
- */
-
-#include <avr/io.h>
-
-/* if not defined, assume old version with underscores */
-#ifndef __USER_LABEL_PREFIX__
-#define __USER_LABEL_PREFIX__ _
-#endif
-
-#ifndef __REGISTER_PREFIX__
-#define __REGISTER_PREFIX__
-#endif
-
-/* the assembler line separator (just in case it ever changes) */
-#define _L $
-
-#define CONCAT1(a, b) CONCAT2(a, b)
-#define CONCAT2(a, b) a ## b
-
-#define _U(x) CONCAT1(__USER_LABEL_PREFIX__, x)
-
-#define _R(x) CONCAT1(__REGISTER_PREFIX__, x)
-
-/* these should help to fix the "can't have function named r1()" bug
-   which may require adding '%' in front of register names.  */
-
-#define r0 _R(r0)
-#define r1 _R(r1)
-#define r2 _R(r2)
-#define r3 _R(r3)
-#define r4 _R(r4)
-#define r5 _R(r5)
-#define r6 _R(r6)
-#define r7 _R(r7)
-#define r8 _R(r8)
-#define r9 _R(r9)
-#define r10 _R(r10)
-#define r11 _R(r11)
-#define r12 _R(r12)
-#define r13 _R(r13)
-#define r14 _R(r14)
-#define r15 _R(r15)
-#define r16 _R(r16)
-#define r17 _R(r17)
-#define r18 _R(r18)
-#define r19 _R(r19)
-#define r20 _R(r20)
-#define r21 _R(r21)
-#define r22 _R(r22)
-#define r23 _R(r23)
-#define r24 _R(r24)
-#define r25 _R(r25)
-#define r26 _R(r26)
-#define r27 _R(r27)
-#define r28 _R(r28)
-#define r29 _R(r29)
-#define r30 _R(r30)
-#define r31 _R(r31)
-
-#ifndef __tmp_reg__
-#define __tmp_reg__ r0
-#endif
-
-#ifndef __zero_reg__
-#define __zero_reg__ r1
-#endif
-
-#if __AVR_MEGA__
-  #define XJMP jmp
-  #define XCALL call
-#else
-  #define XJMP rjmp
-  #define XCALL rcall
-#endif
-
-/* used only by fplib/strtod.S - libgcc internal function calls */
-#define PROLOGUE_SAVES(offset) XJMP (__prologue_saves__ + 2 * (offset))
-#define EPILOGUE_RESTORES(offset) XJMP (__epilogue_restores__ + 2 * (offset))
-
-#if FLASHEND > 0x10000  /* ATmega103 */
-  #define BIG_CODE 1
-#else
-  #define BIG_CODE 0
-#endif
-
-#ifndef __AVR_HAVE_MOVW__
-#  if  defined(__AVR_ENHANCED__) && __AVR_ENHANCED__
-#   define __AVR_HAVE_MOVW__ 1
-#  endif
-#endif
-
-#ifndef __AVR_HAVE_LPMX__
-# if  defined(__AVR_ENHANCED__) && __AVR_ENHANCED__
-#  define __AVR_HAVE_LPMX__ 1
-# endif
-#endif
-
-#ifndef __AVR_HAVE_MUL__
-# if  defined(__AVR_ENHANCED__) && __AVR_ENHANCED__
-#  define __AVR_HAVE_MUL__ 1
-# endif
-#endif
-
-/*
-   Smart version of movw:
-    - uses "movw" if possible (supported by MCU, and both registers even)
-    - handles overlapping register pairs correctly
-    - no instruction generated if source and destination are the same
-   (may expand to 0, 1 or 2 instructions).
- */
-
-.macro  X_movw dst src
-	.L_movw_dst = -1
-	.L_movw_src = -1
-	.L_movw_n = 0
-	.irp  reg,	r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, \
-			r10,r11,r12,r13,r14,r15,r16,r17,r18,r19, \
-			r20,r21,r22,r23,r24,r25,r26,r27,r28,r29, \
-			r30,r31
-		.ifc  \reg,\dst
-			.L_movw_dst = .L_movw_n
-		.endif
-		.ifc  \reg,\src
-			.L_movw_src = .L_movw_n
-		.endif
-		.L_movw_n = .L_movw_n + 1
-	.endr
-	.L_movw_n = 0
-	.irp  reg,	R0, R1, R2, R3, R4, R5, R6, R7, R8, R9, \
-			R10,R11,R12,R13,R14,R15,R16,R17,R18,R19, \
-			R20,R21,R22,R23,R24,R25,R26,R27,R28,R29, \
-			R30,R31
-		.ifc  \reg,\dst
-			.L_movw_dst = .L_movw_n
-		.endif
-		.ifc  \reg,\src
-			.L_movw_src = .L_movw_n
-		.endif
-		.L_movw_n = .L_movw_n + 1
-	.endr
-	.if   .L_movw_dst < 0
-		.L_movw_n = 0
-		.rept   32
-			.if \dst == .L_movw_n
-				.L_movw_dst = .L_movw_n
-			.endif
-			.L_movw_n = .L_movw_n + 1
-		.endr
-	.endif
-	.if   .L_movw_src < 0
-		.L_movw_n = 0
-		.rept   32
-			.if \src == .L_movw_n
-				.L_movw_src = .L_movw_n
-			.endif
-			.L_movw_n = .L_movw_n + 1
-		.endr
-	.endif
-	.if   (.L_movw_dst < 0) || (.L_movw_src < 0)
-		.err    ; Invalid 'X_movw' arg.
-	.endif
-                
-	.if ((.L_movw_src) - (.L_movw_dst))  /* different registers */
-		.if (((.L_movw_src) | (.L_movw_dst)) & 0x01)
-			.if (((.L_movw_src)-(.L_movw_dst)) & 0x80) /* src < dest */
-				mov     (.L_movw_dst)+1, (.L_movw_src)+1
-				mov     (.L_movw_dst), (.L_movw_src)
-			.else                                      /* src > dest */
-				mov     (.L_movw_dst), (.L_movw_src)
-				mov     (.L_movw_dst)+1, (.L_movw_src)+1
-			.endif
-		.else  /* both even -> overlap not possible */
-#if  defined(__AVR_HAVE_MOVW__) && __AVR_HAVE_MOVW__
-			movw    \dst, \src
-#else
-			mov     (.L_movw_dst), (.L_movw_src)
-			mov     (.L_movw_dst)+1, (.L_movw_src)+1
-#endif
-		.endif
-	.endif
-.endm
-
-/* Macro 'X_lpm' extends enhanced lpm instruction for classic chips.
-   Usage:
-	X_lpm	reg, dst
-   where
-	reg	is 0..31, r0..r31 or R0..R31
-	dst	is z, Z, z+ or Z+
-   It is possible to omit both arguments.
-
-   Possible results for classic chips:
-	lpm
-	lpm / mov Rd,r0
-	lpm / adiw ZL,1
-	lpm / mov Rd,r0 / adiw ZL,1
-	
-   For enhanced chips it is one instruction always.
-
-   ATTENTION:  unlike enhanced chips SREG (S,V,N,Z,C) flags are
-   changed in case of 'Z+' dst.  R0 is scratch.
- */
-.macro	X_lpm	dst=r0, src=Z
-
-  /* dst evaluation	*/
-  .L_lpm_dst = -1
-
-  .L_lpm_n = 0
-  .irp  reg,  r0, r1, r2, r3, r4, r5, r6, r7, r8, r9, \
-	     r10,r11,r12,r13,r14,r15,r16,r17,r18,r19, \
-	     r20,r21,r22,r23,r24,r25,r26,r27,r28,r29, \
-	     r30,r31
-    .ifc  \reg,\dst
-      .L_lpm_dst = .L_lpm_n
-    .endif
-    .L_lpm_n = .L_lpm_n + 1
-  .endr
-
-  .L_lpm_n = 0
-  .irp  reg,  R0, R1, R2, R3, R4, R5, R6, R7, R8, R9, \
-	     R10,R11,R12,R13,R14,R15,R16,R17,R18,R19, \
-	     R20,R21,R22,R23,R24,R25,R26,R27,R28,R29, \
-	     R30,R31
-    .ifc  \reg,\dst
-      .L_lpm_dst = .L_lpm_n
-    .endif
-    .L_lpm_n = .L_lpm_n + 1
-  .endr
-
-  .if  .L_lpm_dst < 0
-    .L_lpm_n = 0
-    .rept 32
-      .if  \dst == .L_lpm_n
-	.L_lpm_dst = .L_lpm_n
-      .endif
-      .L_lpm_n = .L_lpm_n + 1
-    .endr
-  .endif
-
-  .if  (.L_lpm_dst < 0)
-    .err	; Invalid dst arg of 'X_lpm' macro.
-  .endif
-
-  /* src evaluation	*/    
-  .L_lpm_src = -1
-  .L_lpm_n = 0
-  .irp  reg,  z,Z,z+,Z+
-    .ifc  \reg,\src
-      .L_lpm_src = .L_lpm_n
-    .endif
-    .L_lpm_n = .L_lpm_n + 1
-  .endr
-
-  .if  (.L_lpm_src < 0)
-    .err	; Invalid src arg of 'X_lpm' macro.
-  .endif
-
-  /* instruction(s)	*/    
-  .if  .L_lpm_src < 2
-    .if  .L_lpm_dst == 0
-	lpm
-    .else
-#if  defined(__AVR_HAVE_LPMX__) && __AVR_HAVE_LPMX__
-	lpm	.L_lpm_dst, Z
-#else
-	lpm
-	mov	.L_lpm_dst, r0
-#endif
-    .endif
-  .else
-    .if  (.L_lpm_dst >= 30)
-      .err	; Registers 30 and 31 are inhibited as 'X_lpm *,Z+' dst.
-    .endif
-#if  defined(__AVR_HAVE_LPMX__) && __AVR_HAVE_LPMX__
-	lpm	.L_lpm_dst, Z+
-#else
-	lpm
-    .if  .L_lpm_dst
-	mov	.L_lpm_dst, r0
-    .endif
-	adiw	r30, 1
-#endif
-  .endif
-.endm
-
-/*
-   LPM_R0_ZPLUS_INIT is used before the loop to initialize RAMPZ
-   for future devices with RAMPZ:Z auto-increment - [e]lpm r0, Z+.
-
-   LPM_R0_ZPLUS_NEXT is used inside the loop to load a byte from
-   the program memory at [RAMPZ:]Z to R0, and increment [RAMPZ:]Z.
-
-   The argument in both macros is a register that contains the
-   high byte (bits 23-16) of the address, bits 15-0 should be in
-   the Z (r31:r30) register.  It can be any register except for:
-   r0, r1 (__zero_reg__ - assumed to always contain 0), r30, r31.
- */
-
-	.macro	LPM_R0_ZPLUS_INIT hhi
-#if __AVR_ENHANCED__
-  #if BIG_CODE
-	out	AVR_RAMPZ_ADDR, \hhi
-  #endif
-#endif
-	.endm
-
-	.macro	LPM_R0_ZPLUS_NEXT hhi
-#if __AVR_ENHANCED__
-  #if BIG_CODE
-    /* ELPM with RAMPZ:Z post-increment, load RAMPZ only once */
-	elpm	r0, Z+
-  #else
-    /* LPM with Z post-increment, max 64K, no RAMPZ (ATmega83/161/163/32) */
-	lpm	r0, Z+
-  #endif
-#else
-  #if BIG_CODE
-    /* ELPM without post-increment, load RAMPZ each time (ATmega103) */
-	out	AVR_RAMPZ_ADDR, \hhi
-	elpm
-	adiw	r30,1
-	adc	\hhi, __zero_reg__
-  #else
-    /* LPM without post-increment, max 64K, no RAMPZ (AT90S*) */
-	lpm
-	adiw	r30,1
-  #endif
-#endif
-	.endm
diff --git a/c/src/lib/libbsp/avr/avrtest/start/start.S b/c/src/lib/libbsp/avr/avrtest/start/start.S
deleted file mode 100644
index 22853a26b3..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/start/start.S
+++ /dev/null
@@ -1,291 +0,0 @@
-/* Copyright (c) 2002, Marek Michalkiewicz <marekm@amelek.gda.pl>
-   Copyright (c) 2007, Eric B. Weddington
-   All rights reserved.
-
-   Redistribution and use in source and binary forms, with or without
-   modification, are permitted provided that the following conditions are met:
-
-   * Redistributions of source code must retain the above copyright
-     notice, this list of conditions and the following disclaimer.
-
-   * Redistributions in binary form must reproduce the above copyright
-     notice, this list of conditions and the following disclaimer in
-     the documentation and/or other materials provided with the
-     distribution.
-
-   * Neither the name of the copyright holders nor the names of
-     contributors may be used to endorse or promote products derived
-     from this software without specific prior written permission.
-
-   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-   ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
-   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
-   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-   POSSIBILITY OF SUCH DAMAGE. */
-
-
-#if (__GNUC__ < 3) || (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
-#error "GCC version >= 3.3 required"
-#endif
-
-#include "macros.inc"
-
-	.macro	vector name
-	.if (. - __vectors < _VECTORS_SIZE)
-	.weak	\name
-	.set	\name, __bad_interrupt
-	XJMP	\name
-	.endif
-	.endm
-
-	.section .vectors,"ax",@progbits
-	.global	__vectors
-	.func	__vectors
-__vectors:
-	XJMP	__init
-	vector	__vector_1
-	vector	__vector_2
-	vector	__vector_3
-	vector	__vector_4
-	vector	__vector_5
-	vector	__vector_6
-	vector	__vector_7
-	vector	__vector_8
-	vector	__vector_9
-	vector	__vector_10
-	vector	__vector_11
-	vector	__vector_12
-	vector	__vector_13
-	vector	__vector_14
-	vector	__vector_15
-	vector	__vector_16
-	vector	__vector_17
-	vector	__vector_18
-	vector	__vector_19
-	vector	__vector_20
-	vector	__vector_21
-	vector	__vector_22
-	vector	__vector_23
-	vector	__vector_24
-	vector	__vector_25
-	vector	__vector_26
-	vector	__vector_27
-	vector	__vector_28
-	vector	__vector_29
-	vector	__vector_30
-	vector	__vector_31
-	vector	__vector_32
-	vector	__vector_33
-	vector	__vector_34
-	vector	__vector_35
-	vector	__vector_36
-	vector	__vector_37
-	vector	__vector_38
-	vector	__vector_39
-	vector	__vector_40
-	vector	__vector_41
-	vector	__vector_42
-	vector	__vector_43
-	vector	__vector_44
-	vector	__vector_45
-	vector	__vector_46
-	vector	__vector_47
-	vector	__vector_48
-	vector	__vector_49
-	vector	__vector_50
-	vector	__vector_51
-	vector	__vector_52
-	vector	__vector_53
-	vector	__vector_54
-	vector	__vector_55
-	vector	__vector_56
-	vector	__vector_57
-	vector	__vector_58
-	vector	__vector_59
-	vector	__vector_60
-	vector	__vector_61
-	vector	__vector_62
-	vector	__vector_63
-	vector	__vector_64
-	vector	__vector_65
-	vector	__vector_66
-	vector	__vector_67
-	vector	__vector_68
-	vector	__vector_69
-	vector	__vector_70
-	vector	__vector_71
-	vector	__vector_72
-	vector	__vector_73
-	vector	__vector_74
-	vector	__vector_75
-	vector	__vector_76
-	vector	__vector_77
-	vector	__vector_78
-	vector	__vector_79
-	vector	__vector_80
-	vector	__vector_81
-	vector	__vector_82
-	vector	__vector_83
-	vector	__vector_84
-	vector	__vector_85
-	vector	__vector_86
-	vector	__vector_87
-	vector	__vector_88
-	vector	__vector_89
-	vector	__vector_90
-	vector	__vector_91
-	vector	__vector_92
-	vector	__vector_93
-	vector	__vector_94
-	vector	__vector_95
-	vector	__vector_96
-	vector	__vector_97
-	vector	__vector_98
-	vector	__vector_99
-	vector	__vector_100
-	vector	__vector_101
-	vector	__vector_102
-	vector	__vector_103
-	vector	__vector_104
-	vector	__vector_105
-	vector	__vector_106
-	vector	__vector_107
-	vector	__vector_108
-	vector	__vector_109
-	vector	__vector_110
-	vector	__vector_111
-	vector	__vector_112
-	vector	__vector_113
-	vector	__vector_114
-	vector	__vector_115
-	vector	__vector_116
-	vector	__vector_117
-	vector	__vector_118
-	vector	__vector_119
-	vector	__vector_120
-	vector	__vector_121
-	vector	__vector_122
-	vector	__vector_123
-	vector	__vector_124
-	vector	__vector_125
-	.endfunc
-
-	/* Handle unexpected interrupts (enabled and no handler), which
-	   usually indicate a bug.  Jump to the __vector_default function
-	   if defined by the user, otherwise jump to the reset address.
-
-	   This must be in a different section, otherwise the assembler
-	   will resolve "rjmp" offsets and there will be no relocs.  */
-
-	.text
-	.global	__bad_interrupt
-	.func	__bad_interrupt
-__bad_interrupt:
-	.weak	__vector_default
-	.set	__vector_default, __vectors
-	XJMP	__vector_default
-	.endfunc
-
-	.section .init0,"ax",@progbits
-	.weak	__init
-;	.func	__init
-__init:
-
-#ifndef __AVR_ASM_ONLY__
-	.weak	__stack
-
-	/* By default, malloc() uses the current value of the stack pointer
-	   minus __malloc_margin as the highest available address.
-
-	   In some applications with external SRAM, the stack can be below
-	   the data section (in the internal SRAM - faster), and __heap_end
-	   should be set to the highest address available for malloc().  */
-	.weak	__heap_end
-	.set	__heap_end, 0
-
-	.section .init2,"ax",@progbits
-	clr	__zero_reg__
-	out	AVR_STATUS_ADDR, __zero_reg__
-	ldi	r28,lo8(__stack)
-#ifdef _HAVE_AVR_STACK_POINTER_HI
-	ldi	r29,hi8(__stack)
-	out	AVR_STACK_POINTER_HI_ADDR, r29
-#endif	/* _HAVE_AVR_STACK_POINTER_HI */
-	out	AVR_STACK_POINTER_LO_ADDR, r28
-
-#ifdef __AVR_3_BYTE_PC__
-	ldi	r16, hh8(pm(__vectors))
-	out	_SFR_IO_ADDR(EIND), r16
-#endif	/* __AVR_3_BYTE_PC__ */
-
-#ifdef __AVR_HAVE_RAMPD__
-	out	AVR_RAMPD_ADDR, __zero_reg__
-	out	AVR_RAMPX_ADDR, __zero_reg__
-	out	AVR_RAMPY_ADDR, __zero_reg__
-	out	AVR_RAMPZ_ADDR, __zero_reg__
-#endif
-
-#if BIG_CODE
-	/* Only for >64K devices with RAMPZ, replaces the default code
-	   provided by libgcc.S which is only linked in if necessary.  */
-
-	.section .init4,"ax",@progbits
-	.global __do_copy_data
-__do_copy_data:
-	ldi	r17, hi8(__data_end)
-	ldi	r26, lo8(__data_start)
-	ldi	r27, hi8(__data_start)
-	ldi	r30, lo8(__data_load_start)
-	ldi	r31, hi8(__data_load_start)
-
-	/* On the enhanced core, "elpm" with post-increment updates RAMPZ
-	   automatically.  Otherwise we have to handle it ourselves.  */
-
-#ifdef __AVR_ENHANCED__
-	ldi	r16, hh8(__data_load_start)
-#else
-	ldi	r16, hh8(__data_load_start - 0x10000)
-.L__do_copy_data_carry:
-	inc	r16
-#endif
-	out	AVR_RAMPZ_ADDR, r16
-	rjmp	.L__do_copy_data_start
-.L__do_copy_data_loop:
-#ifdef __AVR_ENHANCED__
-	elpm	r0, Z+
-#else
-	elpm
-#endif
-	st	X+, r0
-#ifndef __AVR_ENHANCED__
-	adiw	r30, 1
-	brcs	.L__do_copy_data_carry
-#endif
-.L__do_copy_data_start:
-	cpi	r26, lo8(__data_end)
-	cpc	r27, r17
-	brne	.L__do_copy_data_loop
-#ifdef __AVR_HAVE_RAMPD__
-	out	AVR_RAMPZ_ADDR, __zero_reg__
-#endif /* __AVR_HAVE_RAMPD__*/
-
-#endif /* BIG_CODE */
-
-	.set	__stack, RAMEND
-#endif /* !__AVR_ASM_ONLY__ */
-
-	.section .init9,"ax",@progbits
-#ifdef __AVR_ASM_ONLY__
-	XJMP	boot_card
-#else	/* !__AVR_ASM_ONLY__ */
-	XCALL	boot_card
-	XJMP	exit
-#endif	/* __AVR_ASM_ONLY__ */
-;	.endfunc
-
diff --git a/c/src/lib/libbsp/avr/avrtest/startup/linkcmds b/c/src/lib/libbsp/avr/avrtest/startup/linkcmds
deleted file mode 100644
index 46548bffd3..0000000000
--- a/c/src/lib/libbsp/avr/avrtest/startup/linkcmds
+++ /dev/null
@@ -1,241 +0,0 @@
-/*
- * Declare some sizes.
- */
-RamBase = DEFINED(RamBase) ? RamBase : 0x08000000;
-RamSize = DEFINED(RamSize) ? RamSize : 64K;
-HeapSize = DEFINED(HeapSize) ? HeapSize : 0x0;
-StackSize = DEFINED(StackSize) ? StackSize : 0x1000;
-
-/* Default linker script, for normal executables */
-OUTPUT_FORMAT("elf32-avr","elf32-avr","elf32-avr")
-OUTPUT_ARCH(avr:5)
-MEMORY
-{
-  text   (rx)   : ORIGIN = 0, LENGTH = 256K
-  data   (rw!x) : ORIGIN = 0x800060, LENGTH = 0xffa0
-  eeprom (rw!x) : ORIGIN = 0x810000, LENGTH = 64K
-}
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .gnu.version   : { *(.gnu.version)	}
-  .gnu.version_d   : { *(.gnu.version_d)	}
-  .gnu.version_r   : { *(.gnu.version_r)	}
-  .rel.init      : { *(.rel.init)		}
-  .rela.init     : { *(.rela.init)	}
-  .rel.text      :
-    {
-      *(.rel.text)
-      *(.rel.text.*)
-      *(.rel.gnu.linkonce.t*)
-    }
-  .rela.text     :
-    {
-      *(.rela.text)
-      *(.rela.text.*)
-      *(.rela.gnu.linkonce.t*)
-    }
-  .rel.fini      : { *(.rel.fini)		}
-  .rela.fini     : { *(.rela.fini)	}
-  .rel.rodata    :
-    {
-      *(.rel.rodata)
-      *(.rel.rodata.*)
-      *(.rel.gnu.linkonce.r*)
-    }
-  .rela.rodata   :
-    {
-      *(.rela.rodata)
-      *(.rela.rodata.*)
-      *(.rela.gnu.linkonce.r*)
-    }
-  .rel.data      :
-    {
-      *(.rel.data)
-      *(.rel.data.*)
-      *(.rel.gnu.linkonce.d*)
-    }
-  .rela.data     :
-    {
-      *(.rela.data)
-      *(.rela.data.*)
-      *(.rela.gnu.linkonce.d*)
-    }
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  /* Internal text space or external memory */
-  .text :
-  {
-    *(.vectors)
-    KEEP(*(.vectors))
-    /* For data that needs to reside in the lower 64k of progmem.  */
-    *(.progmem.gcc*)
-    *(.progmem*)
-    . = ALIGN(2);
-     __trampolines_start = . ;
-    /* The jump trampolines for the 16-bit limited relocs will reside here.  */
-    *(.trampolines)
-    *(.trampolines*)
-     __trampolines_end = . ;
-    /* For future tablejump instruction arrays for 3 byte pc devices.
-       We don't relax jump/call instructions within these sections.  */
-    *(.jumptables)
-    *(.jumptables*)
-    /* For code that needs to reside in the lower 128k progmem.  */
-    *(.lowtext)
-    *(.lowtext*)
-     __ctors_start = . ;
-     *(.ctors)
-     __ctors_end = . ;
-     __dtors_start = . ;
-     *(.dtors)
-     __dtors_end = . ;
-    KEEP(SORT(*)(.ctors))
-    KEEP(SORT(*)(.dtors))
-    /* From this point on, we don't bother about wether the insns are
-       below or above the 16 bits boundary.  */
-    *(.init0)  /* Start here after reset.  */
-    KEEP (*(.init0))
-    *(.init1)
-    KEEP (*(.init1))
-    *(.init2)  /* Clear __zero_reg__, set up stack pointer.  */
-    KEEP (*(.init2))
-    *(.init3)
-    KEEP (*(.init3))
-    *(.init4)  /* Initialize data and BSS.  */
-    KEEP (*(.init4))
-    *(.init5)
-    KEEP (*(.init5))
-    *(.init6)  /* C++ constructors.  */
-    KEEP (*(.init6))
-    *(.init7)
-    KEEP (*(.init7))
-    *(.init8)
-    KEEP (*(.init8))
-    *(.init9)  /* Call main().  */
-    KEEP (*(.init9))
-    *(.text)
-    . = ALIGN(2);
-    *(.text.*)
-    . = ALIGN(2);
-    *(.fini9)  /* _exit() starts here.  */
-    KEEP (*(.fini9))
-    *(.fini8)
-    KEEP (*(.fini8))
-    *(.fini7)
-    KEEP (*(.fini7))
-    *(.fini6)  /* C++ destructors.  */
-    KEEP (*(.fini6))
-    *(.fini5)
-    KEEP (*(.fini5))
-    *(.fini4)
-    KEEP (*(.fini4))
-    *(.fini3)
-    KEEP (*(.fini3))
-    *(.fini2)
-    KEEP (*(.fini2))
-    *(.fini1)
-    KEEP (*(.fini1))
-    *(.fini0)  /* Infinite loop after program termination.  */
-    KEEP (*(.fini0))
-     _etext = . ;
-  }  > text
-  .tdata : AT (ADDR (.text) + SIZEOF (.text)) {
-     PROVIDE (__data_start = .) ;
-    _TLS_Data_begin = .;
-    *(.tdata .tdata.* .gnu.linkonce.td.*)
-    _TLS_Data_end = .;
-  }  > data
-  .tbss : {
-    _TLS_BSS_begin = .;
-    *(.tbss .tbss.* .gnu.linkonce.tb.*) *(.tcommon)
-    _TLS_BSS_end = .;
-  }  > data
-  _TLS_Data_size = _TLS_Data_end - _TLS_Data_begin;
-  _TLS_Data_begin = _TLS_Data_size != 0 ? _TLS_Data_begin : _TLS_BSS_begin;
-  _TLS_Data_end = _TLS_Data_size != 0 ? _TLS_Data_end : _TLS_BSS_begin;
-  _TLS_BSS_size = _TLS_BSS_end - _TLS_BSS_begin;
-  _TLS_Size = _TLS_BSS_end - _TLS_Data_begin;
-  _TLS_Alignment = MAX (ALIGNOF (.tdata), ALIGNOF (.tbss));
-  .data	  :
-  {
-    *(.data)
-    *(.data*)
-    KEEP (*(SORT(.rtemsrwset.*)))
-    *(.rodata)  /* We need to include .rodata here if gcc is used */
-    *(.rodata*) /* with -fdata-sections.  */
-    KEEP (*(SORT(.rtemsroset.*)))
-    *(.gnu.linkonce.d*)
-    . = ALIGN(2);
-     _edata = . ;
-     PROVIDE (__data_end = .) ;
-  }  > data
-  .bss  SIZEOF(.data) + ADDR(.data) :
-  {
-     PROVIDE (__bss_start = .) ;
-    *(.bss)
-    *(.bss*)
-    *(COMMON)
-     PROVIDE (__bss_end = .) ;
-  . = ALIGN(16);
-
-  . += StackSize;
-  PROVIDE (__stack = .);
-  PROVIDE (WorkAreaBase = .);
-  }  > data
-   __data_load_start = LOADADDR(.data);
-   __data_load_end = __data_load_start + SIZEOF(.data);
-  /* Global data not cleared after reset.  */
-  .noinit  SIZEOF(.bss) + ADDR(.bss) :
-  {
-     PROVIDE (__noinit_start = .) ;
-    *(.noinit*)
-     PROVIDE (__noinit_end = .) ;
-     _end = . ;
-     PROVIDE (__heap_start = .) ;
-  }  > data
-  .eeprom  :
-  {
-    *(.eeprom*)
-     __eeprom_end = . ;
-  }  > eeprom
-  /* Stabs debugging sections.  */
-  .stab 0 : { *(.stab) }
-  .stabstr 0 : { *(.stabstr) }
-  .stab.excl 0 : { *(.stab.excl) }
-  .stab.exclstr 0 : { *(.stab.exclstr) }
-  .stab.index 0 : { *(.stab.index) }
-  .stab.indexstr 0 : { *(.stab.indexstr) }
-  .comment 0 : { *(.comment) }
-  /* DWARF debug sections.
-     Symbols in the DWARF debugging sections are relative to the beginning
-     of the section so we begin them at 0.  */
-  /* DWARF 1 */
-  .debug          0 : { *(.debug) }
-  .line           0 : { *(.line) }
-  /* GNU DWARF 1 extensions */
-  .debug_srcinfo  0 : { *(.debug_srcinfo) }
-  .debug_sfnames  0 : { *(.debug_sfnames) }
-  /* DWARF 1.1 and DWARF 2 */
-  .debug_aranges  0 : { *(.debug_aranges) }
-  .debug_pubnames 0 : { *(.debug_pubnames) }
-  /* DWARF 2 */
-  .debug_info     0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
-  .debug_abbrev   0 : { *(.debug_abbrev) }
-  .debug_line     0 : { *(.debug_line) }
-  .debug_frame    0 : { *(.debug_frame) }
-  .debug_str      0 : { *(.debug_str) }
-  .debug_loc      0 : { *(.debug_loc) }
-  .debug_macinfo  0 : { *(.debug_macinfo) }
-}